KTM Shock service with bladder

[@johnnybeacon4403]

excellent video, good overview of the process, just ordered my vac/chamber/kit, this video has helped understand the key points.. like inflating the bladder to 50psi, then vac/fill/vac/fill etc.. very helpful.. thanks.

[@Mario14792]

I really like your video, in which you show the process, but since I could purge the shock absorber without having a machine for it, in what way, your advice would be very helpful, I hope your clarification, greetings.

[@moto367]

I never seem to get the bubbles you get when degassing the oil. I get very little if any. Reason? Also when I pull vacuum the shock shaft needs a little assistance to move inward. Moves no problem when pushing oil in. I have the same size pump as you. Pull around 25 hg I believe.

[@tepemotorpamukova7626]

Ustam bu aparatlardan nerden alabilirim

[@jorgearraiol6350]

very good process , you bought the vacum bleeder machine by a well known brand or did you build your own?

[@dezertXer]

Jorge Arraiol I got it from shockbleeder.com

[@scoutpiccini4014]

When adding 50psi to the bladder the bladder expands and blocks the bleed port off. Sealing it not allowing for a vac pull.

[@yu130960]

@@scoutpiccini4014 Three years later but thought I should post for others that I too had the bleed port blocked with 50 psi in the bladder, but it seemed to work fine with 20 psi in the bladder.