KYB TOYOTA Yaris II Front

[@filpip6762]

grinningphd 4 months ago Great video, was very helpful, thanks!

[@krisursule6230]

Its the best of videos. Look at this moment 5:30. It's the same part that the original Toyota.

[@sourcefollower]

Great video, was very helpful, thanks!

[@anru2774]

Great video, used it to change mine out. I have a question, I did the same exact thing you did but for some reason when I lowered the car, they pushed up and theres a gap under the top nuts on both sides that hold the shocks on top. When I raise the car again and move the tire up and down the entire shock moves up and down because of the gap. I brought this Yaris 08 they had the gap so I brought the new mounts and bearings but still have the gap,Do you thing someone installed the wrong shocks absorbers?

[@josedanielpg2329]

I have the same question, but in a Yaris 2013.

[@anru2774]

@@josedanielpg2329 I ended up buying different Strut Mount. The round plate that holds the spring in. My car strut mounts only had the nut in the middle to hold sping. I changed them for the strut mounts that have the 3 bolts facing up and fit in the 3 holes that are on the car. So to remove them in the future, instead of removing the big nut, I remove the 3 smaller nuts.

[@fjrodz9958]

Where can I get the tool to remove the top end of the shock? Thanks

[@alfredobrown]

ok, on my way to the garage to do this. wish me luck.

[@tardeliesmagic]

This way is quicker,easier and hastle free... it's a hack...kzbin.info/www/bejne/ami1n3qYYtl0oaM

[@lionelsoto2327]

Excellent,, which is name strut mount remove. ( allen) ??

[@oswaldowever1263]

Nada de arriba hay q desarmar,,,, una llave offset de 17mm y una llave L sueltan el amortiguador

[@Majorhavoktv]

very nice video!

[@fazalelahi1]

shock absorber for 1000cc variant the same or there is difference 1.0 cc and 1.3 cc? if there is difference then what is the part number for 1.3 cc.

[@femalegarage]

Great video, nicely done.

[@xanavy384]

Where can i get the tools for the top of shockbreaker remove?

[@zloben9000]

OMFG you DONT need to remove anything... use a box end wrench... removing wipers ?

[@joshstrassburg5545]

Exactly, too much work on the wipers not needed

[@auxmike]

You can get the top nut off without removing all those parts like he did. But it is t easy!

[@tonyd1z3]

nice video and job. thanks

[@kalvenjamieson]

Toyota sanctioned weight reduction tutorial

[@velr50gt]

It’s ridiculous all you have to remove to “gain” access to the strut nuts.

[@joshstrassburg5545]

You don’t Pass thru socket set will do it, harbor freight 20$ The wipers do not need to come off

[@tonyd1z3]

nice video and job. thanks