L10, M11 and N14 Cummins Engine Will Not Start Could be a Bad Fuel Solenoid?

L10, M11 and N14 Cummins Engine Will Not Start? It Could be a Bad Fuel Solenoid? Call 810.653.6300 for Free Cummins Tech Support

[@jonathonmorgan7627]

Thanks for the new videos! Always trying to learn something new about the n14.. I watched one of your videos a while back about an injector harness for my n14 and it fixed my prob.. keep the videos coming! Watching from Seymour Tx

[@w924]

thanks so much for the video. my L10A starts well but shuts down after a couple of minutes..no it doesnt have a shut off timer, but I will now go do the voltage checks on the solenoid as you suggest and go from there.

[@rogueexcavating3839]

Im working on a N14 from hell at the moment. bought it cheap with a no start compression is good new injector harness new check valve 12V at the shut off solenoid. Brand new fuel pump new cam sensor. verified the ECM by trying one off a truck with no issues. But it still cranks and sometimes starts but not always. when its cranking if you hit it with a shot of starting fluid it fires instantly and could pull a B train up a mountain. No power or running issues once running. Going to try a new set of battery cables and 4 new batteries and order your key on ECM power supply kit.

[@terrychron]

Hi, sounds like you got air in the fuel. We are having a lot of ECM Cooler plates that are leaking internally or clogged plate or check valve. If it starts and stays running, it is most likely fuel related or it's starving for 10-12 volt as the engine is turning over. Good Luck Terry Text me 727.494.5514 or land line 810.653.6300 ask for Terry! www.n14parts.com

[@elliotkahitamina8252]

Hi can you please help me with my Toyota Corolla 5A engine 1995 no start no spark no fuel but cranks well

[@Don-wh7kb]

I have a n14 Cummins on a 95 international 9400i and the truck cranks but then a stop engine light comes on and the whole truck shuts down I've changed the fuel solenoid and the ecm from a truck that was running with the similar engine and everything, that's it so far, I've kept reaserching and researching what to do can someone help me out and give me some tips????

[@Maceve88]

How could I send you a video to show you what my problem is