Labor Day weekend Test and Tune and new PB

#noprep #NPRC #RCHRA #R1wurks #Customworks #fivestarhobbies #DC1 #patriot #FuriV2 #cyrul #castlecreations #ghostrc #dragrace #dragracing
R1 Wurks DC1
Custom Works Patriot (setup using setup sheets on Custom Works website)
Five Star Hobbies (setup using setup sheets from Fivestar Hobbies website)
The Patriots were setup using setup sheets on Custom Works website (Jay
and Cam’s info)
I’ve received a ton of help from Brett Burdine (Custom works driver) and Stew Mac also. The more I learn the more I will share!
All cars use R1 GTC body
All cars use Ghost ESC and Castle 6400KV motors except Patriot 1 (ghost motors installed on both patriots along with R1 Digital 3 Pro’s from Nick Bell)
All cars ran using a Sanwa M17
8600 SMC in the Patriots
12000 SMC in the Furi
9000 Gens Ace in the DC1
All cars have ceramic bearings (Furi comes with them)
Patriot details
Ghost ESC/R1 Digital 3 Pro NBR
Castle 6400KV motor/Ghost 7000kv motor
Sanwa M17
Cyrul hard front
Cyrul Gen 2 white on all cars
Conditioned with live action grape
3 coats of Get Stuck EAD
True speed ceramic bearings
R1 differential and idler
Sky RC setup station used to set front toe and camber to 0 deg.
2097g (weighed without body) 41/59 split)
96 ramp
EPA 105-108
Curve 0
Point 10-20
cheat timing 45 deg 18.7k-50k (varied on the different cars)
Furi: 32T/99T FDR 7.889
DC1: 31T/93T FDR 7.8
Patriot 2 (6400KV motor): 31T/98T FDR 8.219
Patriot 1 (ghost motor): 29T/100T FDR 8.966
Custom ESC curve (Stew Mac’s tune)
Punch control 10-20
Start power low/high

[@Danny.fb6]

Bro I’m really loving these videos! I got a dc1 so you’re the only guy putting in work with the dc1. I’m struggling with mine but I’ll get there soon.. hopefully lol.

[@CANAMROCKS1]

Dang right!!!! Getting em dialed in!

[@alyarmak-bu8it]

Good job, keep up the great work

[@juliussmith2630]

Thank you!

[@UrbanLegendRC]

Nice 👍🏾 your dialing them in

[@jdjew4003]

Hell yeah! Subbed

[@juliussmith2630]

I appreciate it!

[@dragracewithfiguerc7363]

Great video 💪🤙💪

[@juliussmith2630]

Thank you

[@jayspeedchannel]

Need this prep

[@juliussmith2630]

It’s get stuck EAD and spider spunk. I use the spunk to create the initial groove and then each hit I use three coats of EAD (flashing each coat) and then a Mohawk strip of spider down the center of each tire and then flash again.

[@visaliarcdragracing5276]

What gearing were you running during these passes

[@juliussmith2630]

Different gearing on different cars. Somewhere between 9-10 FDR with a ghost motor. 7.8-8.2 FDR with the green castle motor.

[@Noemedrano1]

What type of sauce are you using

[@juliussmith2630]

Get stuck prep. EAD and spider spunk

[@Buickking76]

What gears in it

[@claybrown1619]

Hey Brother AWESOME VIDEO AS ALWAYS!!! I've got a question for your DR10M as far as what is the quickest E.T. and M.P.H. have you ran with it and THANK YOU MAN FOR ALL OF THE TIME THAT YOU PUT INTO YOUR AWESOME CHANNEL AND GOD BLESS ✝️✝️✝️ SINCERELY CLAY B. AND 🏁SPEED MOB RACING🏁

[@juliussmith2630]

Hey. Thank you for your support. My best time with the DR10M has been 2.09@74MPH. That’s with the iceman chassis. I’ve heard of others going faster on a stock chassis but I never got there before I destroyed that chassis.

[@claybrown1619]

@@juliussmith2630 THANK YOU for getting back to me man that's AWESOME!!! I'll let you know what my DR10M runs I'm waiting on a few more hop up parts EXOTEK and MORBO RACING hopefully here by Wednesday GOD BLESS ✝️ SINCERELY CLAY B

[@juliussmith2630]

I have tried the Morbo and R Design wheelie bar. I like the R design better. Also R design has some nice lightweight parts for it.

[@claybrown1619]

Hey Brother I just wanted to touch base with you and let you know that you talked me into spending some money 🤑 LOL HA HA HA HA HA HA HA I ordered the R-DESIGN LIGHT WEIGHT BULK HEADS all 3 pieces and I got the "MORBO RACING" SERVO RELOCATION KIT AND THE CARBON FIBER FRONT SHOCK TOWER AND THE CARBON FIBER 6-MM TRANSMISSION RISER PLATE AND THE CARBON FIBER REAR BODY MOUNT KIT LONG PLATE AND THE 6-PACK CAP PACK I ALSO HAVE THE TEAM ASSOCIATED FACTORY TEAM CARBON FIBER CHASSIS PLATE FOR THE DR10M AND I JUST ORDERED A BUNCH OF ALUMINUM FACTORY TEAM LIGHT WEIGHT PINIONS 16 THROUGH 30 TOOTH AND SOME FACTORY TEAM SHOCK OIL DIFFERENT WEIGHTS AND "EXOTEK RACING" ALUMINUM ALLOY 3-GEAR TRANSMISSION FOR DR10M AND CARBON FIBER FRONT BUMPER SET AND FLITE SPUR GEARS 81, 87, 92, 99, 104 TOOTH AND SLIPPER ELIMINATOR AND A PROTEK-RC GRAPHENE DRAG RACE 8800mAh 7.6v 200c (8-mm) BULLET PACK AND A "TEKIN" RX-8 GEN-3 ESC WITH THE v295-DRAG TUNE UPDATE INSTALLED AND A TEKIN ELIMINATOR REDLINE GEN-4 (2.0T) DRAG MOTOR AND A TRINITY RACING HOLE SHOT DRAG MASTER (3.0T) W/ 5% CERTIFIED ULTRA TORQUE BLACK TOP 13.5mm ROTOR (TEP1154C) "S.M.R. TUNED" AND I'M RUNNING THE FUTABA T4PV RADIO SYSTEM AND I USE THE HI-TEC X2 AC PLUS BLACK EDITION CHARGER AND TIRES ARE PRO-LINE ULTRA BLUE AND VOODOO REDS AND CYRUL 3DFX ALSO I WILL BE ORDERING A FEW SETS OF CERAMIC BEARINGS FOR IT AS WELL MAN I'VE BEEN LOOKING AT THE NEW UNDERCOVER BLACK EDITION CHASSIS CONVERSION KIT FOR IT THAT THEY JUST COME OUT WITH IT NOT TO LONG AGO I THINK THAT THEY ARE WANTING $245.00 FOR IT AND I'LL HIT YOU UP AND LET YOU KNOW WHAT I DO ON IT MAN I WAS ALSO LOOKING AT THE BRAND NEW EXOTEK VADER PRO CHASSIS KIT BUT I'M ALREADY HEARING THAT IT'S NOT GOING TO BE LEAGAL BECAUSE OF THE FRONT AND REAR SUSPENSION ARMS ARE CARBON FIBER AND NOT COMPOSITE OR PLASTIC SO I DON'T KNOW WHAT TO BROTHER BUT I HOPE THAT YOU POST A NEW BADAZZ VIDEO MAN CAN'T WAIT TO SEE IT AND TELL ME WHAT YOU THINK ABOUT MY DR10M SETUP SO FAR AND GOD BLESS BROTHER ✝️ SINCERELY CLAY B. AND SPEED MOB RACING 🏁

[@reallythough4591]

Whats it run without stickem on the tires? My biggest issue has been planting on launch, but i was under the impression that tire prep was okay, but they had to be wiped down. Yours left tracks just rolling back and forth.

[@juliussmith2630]

It depends on the race class and race director. Most of the times in outlaw or street eliminator, you can use whatever prep you like.

[@juliussmith2630]

I haven’t run it dry tire. So don’t know what it will run without the prep.

[@reallythough4591]

I've gotten to 2.5, but tires have no good, and only around 60-65. I'm certain it will do under 2 if tires just stick

[@PlayMoreMuzik]

What sticky sauce are you using? That's insane

[@juliussmith2630]

It’s get stuck EAD and spider spunk

[@GHOSTRACING-b5j]

Ok bro can you help me out with my car I’m new to the tuning stuff and I need some help thanks !

[@1980chardison]

im sorry but that rollout is bad form, deff not allowed in races

[@juliussmith2630]

I appreciate the comment. It is allowed at some races. What I am doing in the videos is building up my groove as it would be in a real race. That’s all. Have a good season racing.