Lancer stereo removal and aftermarket install Part 2 of 2.

How to install a single or double DIN stereo into an 2008 - 2013 lancer, ralliart or evolution X.
Part 1: Removal of the standard headunit and the necessary bits therebetween.
• Lancer stereo removal ...
Part 2: Install of a Single or Double DIN aftermarket stereo.
• Lancer stereo removal ...
DIN and Double DIN In Dash Kit bought at:
www.scosche.com...
Word of note: Don't loose your clips!
Questions or comments can be dropped in the rectangle below!

[@ExploreTheKnown]

Thank you, I bought it at my local car audio store, almost every store have them in stock, just ask for a mitsu iso adapter and give them your year and model. Yes you need an adapter if you don't want to splice up the wire harness. That depends on what navigation unit your going to use, stock/aftermarket?

[@ExploreTheKnown]

That all depends on if your new stereo support steering wheel controls or not. If it does support steering wheel controls all you need then is an adapter to convert the signals from your steering wheel into your new stereo and then your good to go :)

[@Tr4Zr]

IMPORTANT POINT YOU MISSED UNPLUG BATTERY.....

[@ARSIROYAL]

A really nice work Thank you for the instruction Where can I buy the slide panels? What holds the CD player (02:48) Where can I buy the adapters? (11:33) LINK?

[@ExploreTheKnown]

Thank you. Yes the ribbon cable/flat cable, It's used to light up the factory headunit's display. So you won't loose any functions by removing it. So no, you don't need it.

[@ExploreTheKnown]

My lancer is imported from the US, so yes. It will fit your as well. I didn't buy the ISO adapter from a Mitsubishi dealer so I don't have any specific model #, just drive over to your local car audio shop and ask for a ISO adapter and name your model and year, they will help you out, they usually have them stocked up in the shop.

[@ExploreTheKnown]

Yes It will. The mounting points for the facia is the same from 2008-2013.

[@mantlecollector]

U probably should tested to see if the radio worked before putting all the trim pieces back cuz what if u put the trim pieces back and went to turn the radio on but doesnt come on cuz of a bad wire in the harness or something then u would have to take off the trim pieces to see whats wrong.

[@ExploreTheKnown]

I'm 99% sure that the flat wire harness is used for the power supply for the factory stereo display. The steering wheel controls has a seperate wire harness that almost looks like the one where you put your ISO adapter for the stereo, they sit next so each other.

[@TALONZYT2]

really appreciate the fact that NOBODY FUCKING SELLS THE WIRING HARNESSES IN THE US

[@ExploreTheKnown]

Glad to help! I have some gauges that I will install soon and I can probably do a "how to" on it :), though I have to replace the clutch on the evo first (burned down after some 1/4 mile practice runs).

[@chasenordhoff583]

So if I put a aftermarket in will I lose the steering wheel controls??

[@redwing7583]

i installed mine fine, but there was a plug on mine that wasn't used. was that for steering wheel controls maybe? it was plugged into the factory unit but no place for in in my after market one.

[@ExploreTheKnown]

Thank you very much, I really appreciate it! Yes I did actually, I went to my dealer and bought some new clips and after that the alignment was perfect, just like stock.

[@paddyc2376]

A lot of the kits I see on ebay don't have the little clix you have to hold the single din stereo into place, can it be fitted without those?

[@logancharnock]

Can you put a link to the wiring harness?????

[@NC-oi5id]

Does this aftermarket part you linked fit in a sportback?

[@ExploreTheKnown]

Sorry, forgot to add that. It's added in the description, thanks for the heads up!

[@ExploreTheKnown]

Hey, thanks for noticing, I mentioned it in part 1 but maybe I will need to make a annotation about it. Thanks for the heads up :)

[@faridkhouane1782]

does the iso harness have to be specifically for the evo 10? can you give me a link to buy this iso harness i have a 2008 evo 10 thx

[@michaelcruz1996]

Where did you buy your iso adapter and do i really need it? If I'll get a double din stereo with navigation, do i need another cable for navigation? Btw. Great video, very informative. Thanks!

[@justengrant2308]

Will that ISO adapter work with even an American market car and an American aftermarket stereo? and is there a special model number for that ISO adapter you used that'll fit a 2011 lancer??

[@chasenordhoff583]

Will this same dash kit work for a 2013?

[@AlexanderLopez-em9tz]

I bro. A wanna change the original radio, for any else whit dvd player, because my current radio don´t read normal cd or mp3 cd neither. If I change radio will be loose the buttons radio control on the steering wheel?? Sorry for my bad english and tranks....

[@achnada727]

Did you just screw on the radio to the dash kit or slide cage of the radio then you slide in the radio?

[@DREADNOT925]

Great video! You kept it humorous and entertaining but also informative. Did you ever get the alignment between the dash and stereo piece to fit better?

[@justengrant2308]

one last thing, does this iso adapter eliminate the need to cut and splice wires?

[@ExploreTheKnown]

It's a double DIN stereo so it will fit!

[@running4life436]

But where did you get the ISO adapter??? THAT'S THE BIG QUESTION NOT IN DESCRIPTION 😟😟😟

[@skyward-e9s]

i have a lancer 2013 i am change my factroy stearo to a 6.5 ich tv. would i need to change the front plastic?

[@grr1990]

Would this work for a 2015 lancer es the head unit is completely different now

[@marcelovenegas8478]

lol look in the background at 12:33 😉

[@isaaccavazos5662]

Haha haha

[@dr.schnitzel5706]

haha good eye

[@justasher.]

I saw it too lol

[@zoSilverSMOKEoz]

How would i know if the aftermarket head unit im wanting to buy will fit the dash plate? (pioneer AVICZ140BH)

[@zizzyfunchannel8176]

Good video...my stock stereo just broken

[@ExploreTheKnown]

... Just like a regular ISO adapter but for the steering wheel controls!

[@ExploreTheKnown]

Alright, then you need an iso adapter/wire harness, it works with both the single and double din, no difference between the two. Almost every nav units have built-in gps today so no extra cables are needed :)

[@AlMedic2000]

Hi mate, on the front of the original stereo under the right hand knob, there is a small ribbon wire, can you tell me where that plugs into in the dash please? My friend has installed an aftermarket stereo but now wants the original put back in and we can't find where the ribbon plugs into in the main CD player box or in the hazard light plug area, and worse yet, we can't even find the ribbon itself! Have you got a part number for it at all mate??

[@achnada727]

Do you have factory speakers still on door s or did you put aftermarket new speakers in?

[@DiFrancoFilms]

Is it possible to still have functionality with the steering wheel controls after installing an aftermarket stereo head unit into a Lancer 2010 sx?

[@nickwhitaker3540]

You'll need to buy a separate kit that's compatible with your controls you want to use

[@temich1985]

Tried to install aftermarket stereo on '08 Lancer but I had no audio at all. You can see on 11:26 that a factory radio has two connectors and for aftermarket radio you only attach it to one of them. Did you have no sound issues as well?

[@sparky9608]

temich1985 Refer back to the 4:00 part of the video where he talks about the ISO cable.

[@temich1985]

logan jamie thanks!

[@ricodeguzman5338]

Hi! How do you retain the steering wheel controls on the new radio? Also, is there a specific name for the ISO adapter? Thanks.

[@rokenguitarz]

For the single din stero, is it supposed to be able to just slide into the dash to get into place? For example, say I'm putting in the din stero but it doesn't go into the slot. Is that what is supposed to happen?

[@ExploreTheKnown]

Yepp, just slide it into place.

[@luv2dancega]

Do you have a link for the adapter?

[@R0bZiLLLAA]

What kinda stereo is that

[@cinthiamorazan7997]

Hola aunque cambie el radio siempre funcionarían los controles en el timón?

[@richardmoore1995]

What is the other wire harness for I seen you just stuff it back in the dash. Is it the steering wheel control harness?

[@ExploreTheKnown]

That is correct Sir.

[@steven94lopez]

Would you still be able to use the "hands free Bluetooth" that's on the steering wheel ?

[@sweguides7848]

Steven Lopez Only if it's supported in the new head unit, you also need some connector for it. I'm afraid I haven't given it much thought since I have another steering wheel without any function .. except the horn.

[@cuauTeliz]

Nice video ETK! I am about to buy a dash kit and it includes a wire harness which is kinda different from the "ISO Adapter" you are holding at 04:20. Are they the same thing? Thank you!

[@ExploreTheKnown]

Thank you good sir! They may differ a lot visually but if your getting a ISO Adapter your getting the right thing :) Worst case scenario is: You have to buy a new one at your local stereo dealer for 5 bucks.

[@michaelcruz1996]

I am going to use an aftermarket double din with nav.

[@euanpetrie]

Link for the dash plate please

[@valsverdlov5458]

You cant use the original dash kit with an aftermarket headunit??

[@snipingmaniac99]

nope, simply does not fit the right way

[@GWP95]

i just need to know where to get the iso cable you got please help!!!!!! a link would be awesome

[@ExploreTheKnown]

Try ebay :)

[@isaaccavazos5662]

can you do this install while driving the car? or will it not work as well

[@tilmanr.3299]

are u mad dude??

[@rokenguitarz]

Did you purchase the ISO adapter online? If so could you please link it. Thanks for the video man, needed it.

[@ExploreTheKnown]

I went to my local car stereo shop and bought it, if you don't live near one just google "iso cable Mitsubishi" and you will find several stores that sell them, make sure to get one that fits your model, they differ between years.

[@rokenguitarz]

Thank you for the help

[@marjazambrano1564]

where did you buy the I so adapter from?

[@marjazambrano1564]

which Iso adapter did you used?

[@TheFinalAnswer3]

where did you get the dash?

[@ecutc3]

good install..thanks for the help

[@kariekasaira2159]

Thank you for the video

[@jamesburger8852]

Hey why do you have a blow up doll? Lol

[@bird_c7]

where

[@giovannigallego181]

Guys if your looking for the link to the dash kit itsthe box above the comments box, just click show more. or here it is kzbin.info?q=http%3A%2F%2Fwww.scosche.com%2F2007-12-mitsubishi-lancer-din-w-pkt-dbl-din-kit&redir_token=GFq2K8_7HgUS4U65Soab4IVf8_l8MTQyNTc4MzQ5NUAxNDI1Njk3MDk1

[@Plushybear09]

You need more light we can't see

[@duberreyes9895]

Turn on but no sound for me

[@ShadowLalo123]

How'd u fix it?😅

[@michaelk9527]

when you crack the dash 15:57

[@jjcrizzls15]

Did anyone else notice the blowup sex doll in the garage?

[@packrat412609]

I have no sound... Help? Haha

[@ShadowLalo123]

How'd u fix it?

[@KoKopuffs6]

So i have a 2010 lancer whats all needed for the install wires i have steering wheel controls

[@Gator1989hdz]

Where did you get the 12 volt switched mine only has constant at the plug

[@atonmusik]

Hi I have a question .. when installing a new radius will lose contro q I have on the steering wheel that is control volume up and down. And the switch to auxiliary mode . And else. ? Thank you

[@ben.chuquimia]

Does the blue tooth mic. still work?

[@ExploreTheKnown]

Nah, I didn't have that before either so I doubt It work now :)