Land Rover Caster Corrected Radius Arms Installation And Results (Discovery 1, Defender, RR Classic)

In this video we will be installing caster corrected radius arms on my lifted Land Rover Discovery 1. We will be having a look at the results in axle positioning.

[@Kris-jk9mq]

Thanks for taking the time to film video! My TF arms come today for my Disco. Awesome to see it CAN be done on the ground! I'm paying to the LR gods the bolts come out cleanly :)

[@TheUntraveledPath]

Your welcome, good luck!

[@nineelevensouth]

Great video. I am getting ready to add a 2.5" OME lift to my D1 for new 33s. Good to know about the radium arms.

[@LoizidesGeorge]

#RESPECT ! [detailed and helpful] Γ

[@enjoyingend1939]

Nice i'm personally keeping my disco as close to factory as possible so no such upgrades but it's always nice to see someone putting them on their rig

[@TheUntraveledPath]

Yes, they are great all around from factory

[@SpeedieRovers9762]

Nice install, did a good explanation on the function of each part for those who don’t know. I’m ordering a set of arms the same and panhard rod. You could probably grind the sides down on the arm to make the bushes sit deeper on the end that wouldn’t fit.

[@TheUntraveledPath]

Thank you! Yes I've been wanting to do that for the past month but have not got around to it yet

[@NickLev]

I ended up trimming around the yellow Panhard bushes with a knife to make them fit. Future plan is to upgrade to Td5 bolts (M16 vs M14) and bushes which fit to the adjustable Panhard and do not require the special sleeves.

[@TheNorthernExplorer]

Nice one! I’ve just got the same arms to go on! I’m also considering a bit more of a lift.

[@SpeedieRovers9762]

How do you find the arms? I’m looking at getting a set

[@TheNorthernExplorer]

@@SpeedieRovers9762 I’ve not fit mine yet, it won’t stop raining!

[@HP-mz1id]

What coil springs did you use??

[@vincentpoole7588]

U/P. Very good attempt at install ! Will you also upgrade the rear axle central pivot with a high articulation fulcrum bracket to match mista ? V.

[@TheUntraveledPath]

No need to do so yet

[@matthewkepley5631]

Was the handling bad before? How is it now?

[@macphestozoo3885]

Nice job!! Did you get the 3 degrees or 6 degrees

[@TheUntraveledPath]

Thank you, 3 degrees was enough for 2.5 inches

[@ktrudeau340]

Hope you have better luck than me. I bent my terrafirma castor correct radius arm on a rock.

[@TheUntraveledPath]

Time will tell, these are the britpart ones

[@loizoug]

Looking to find those improved front radius arms for my P38. No luck yet, thinking for correction bushes instead!

[@TheUntraveledPath]

Check for discovery 2 ones. They might be the same ones but I am not 100% sure

[@NickLev]

@@TheUntraveledPath very different ;)

[@TheUntraveledPath]

@@NickLev Good to know! Thanks