" LAND ROVER DEFENDER. IF YOU HAVE'NT GOT ONE YOU WANT ONE " TD5 A SHORT VIDIO OF CHANGING THE FRONT RADIUS ARMS . WHEELS ON OR OFF ???
Пікірлер: 17
@landroversahara4381Ай бұрын
Congratulations
@cwtindall6 ай бұрын
Great instruction, a pleasure to watch thank you.
@Kiss-My-Aura7 ай бұрын
Be aware copper grease is abrasive, should use ceramic grease / antifret paste etc. Copper grease has not really had a valid application on a car since the 80's.Best place for it is the bin! Great video!
@georgemobbs44135 ай бұрын
GLAD TO SEE YOUR PREVENTIVE MAINTENANCE AS UNDERSIDE LOOKING GOOD ALL THE BEST
@TD5PRESERVATION-14285 ай бұрын
Hi yes Preservation. Thank you
@dx-xb8 ай бұрын
I've done a few jobs under my defender and removing bolts takes most of the time, and decided that from now on i will cut any and all bolts off and replace them. I wont bother struggling on my back under the car, and now i order the parts with the bolts if not included.
@TD5PRESERVATION-14287 ай бұрын
Hi Yes I am always prepared to cut off old bolts . But it is a bonus if the do come undone Thanks .
@BigArch65648 ай бұрын
Cracking honest vlog and thanks for sharing.
@TD5PRESERVATION-14287 ай бұрын
Thank you.
@kabaottoemulsion18697 ай бұрын
in Video looks easier but I am sure there must have been lots of swearing! I also replaced one and bushes. Removing old bushes were annoying! Next time I will do wheel off as it was very heard to alight the holes!
@TD5PRESERVATION-14287 ай бұрын
Hi yes I found wheel off easier, but body does move .so I used strap to align holes. Good luck thanks
@lear60man4 ай бұрын
Great video. Question.....what were your symptoms that led you to replace the radial arms? And more importantly, how was the result? Thank you.
@TD5PRESERVATION-14284 ай бұрын
Hi I didn't have any symptoms regarding the radius arms . I just noticed when changing the springs that the bushes seemed a bit worn. The results I can't say I noticed anything specific but with all of the worn parts that I am slowly replacing I think my defender is defeniatly running and driving better. And I must say The best result is the satisfaction of doing the work my self. and I can honestly say if I can do it anybody can . Have Fun Thank you.
@lear60man4 ай бұрын
@@TD5PRESERVATION-1428 Perfect. I doing the same to a softdash Range Rover Classic....slowly restoring bits here and there. I trying to tackle things as they come up or when there is a clear risk/reward. I just replaced the shocks and air ride shocks, next are the sway bar bushings. I might just inspect the radius bushings and leave them as is for a while.
@jglp90618 ай бұрын
Are you able to provide a link to where you sourced your radius arms? Great vid
@TD5PRESERVATION-14288 ай бұрын
Hi I got the radius arms on eBay I think just a random seller. I find the Land Rover parts sellers on eBay to be pretty good value and reliable . Thanks