LAND ROVER DISCOVERY 3 DISCO 3 TDV6 2.7 FUEL PUMP BELT REPLACEMENT EP1 HIGH PRESSURE FUEL PUMP

This video is about changing the engine fuel injection pump belt on a discovery 3 TDV6 2.7. Please bear in mind that this is the first time I have attempted this job myself, so it is over 3 videos and has very minimal editing done to it to try and capture how awkward the job is.
This job took me about 4 hours with recording. I reckon with help of this video you can get that down to at lest 3 hours, just taking the bullet points from the video.
WARNING :-
See What Else I’m Up To on these lot :- EP 2:- • DISCOVERY 3 TDV6 2.7 E...
EP 3:- • DISCOVERY 3 TDV6 2.7 E...
On Instagram :- / rawtoasttv
On Facebook :- / rawtoasttv
On TikTok :- / rawtoasttv
On Twitter :- / rawtoasttv1
On Patreon :- / rawtoasttv
Come and say Hi,
I'm a very social guy.
Music By
If you found this video valuable, give it a like.
If you know someone who needs to see it, share it.
Leave a comment below with your thoughts.
Add it to a playlist if you want to watch it later.
Feel free to share this video:- • LAND ROVER DISCOVERY 3...
Check out our related videos:
.Channel Tags:-
discovery 3, tdv6, discovery 3 off road, discovery 3 timing belt, discovery 3 fuel pump belt replacement, discovery 3 timing belt kit, disco 3, discovery 3 high pressure fuel pump replacement, discovery 3 fuel pump belt change, disco 3 fuel pump belt replacement, disco 3 timing belt kit, disco 3 high prseeure fuel pump belt replacement, disco 3 fuel pump belt change, discovery 4, land rover, tdv6 fuel pump belt replacement, hpfp,
#raw toast tv

[@rawtoasttv424]

If you have any questions about this job lease feel free to comment. Many thanks for watching.

[@mkps_2340]

Qual o torque que vai nesse parafuso do esticador? Obrigado.

[@Tuffpaddy03]

Wow. What an absolute ball ache 😂

[@Discoworx]

What's that square looking thing with the 2 electrical connections and looks to have an intake pipe coming from a round filter between the battery and power steering fluid cap? A diesel heater? My 2005 doesn't have one of those.

[@rawtoasttv424]

Yes it's a diesel heater.

[@janekrts]

Thanks

[@rawtoasttv424]

Your welcome.

[@targetoz5470]

Could you please tell me if the LR4 3.0ltr has this belt?

[@rawtoasttv424]

Yes it does, BUT, IT HAS TO BE TIMED INTO THE 2 PULLYS. Everything is the same as whats going on in this video and you will need some sort of mirror to be able to see the marks on the pullys. Thanks for the comment..

[@rawtoasttv424]

have a look here facebook.com/MMPLandRover/posts/there-is-a-timing-belt-in-there-someplace-30-tdv6-discovery-4-in-for-timing-belt/1539103362776956/

[@steffenbuettner4294]

Still not sure whether to do this or to only change the timing belt, and say fuck it about the pump belt... Especially because it's an SDV6, where it's indexed, ahhhhh. Don't even know if the dealer will do it tbh. Timing belt only looks alright, even if it is still a bit of a faff.

[@johndoyle8030]

Hi have you done the vacuum pump as I need to replace mine

[@rawtoasttv424]

No sorry I haven't.

[@johndoyle8030]

Must be same as it’s back of engine like just opposite side

[@rawtoasttv424]

@john doyle yeah I think it's on the opposite head. U could probably do it by removing the heater matrix pipes that run down the left hand side of the engine, and try to get at it that way.

[@johndoyle8030]

Any videos on here to replace vacuum pump L320 if anyone knows be helpful thanks

[@rawtoasttv424]

No sorry there's not.

[@fadyfikry8020]

At what mileage are you meant to replace this back belt? And can I know what was your mileage on the car when you have done it? I have a Ford territory titanium 2012 which I believe using same engine as land Rover but not sure when should I do mine.

[@aaronhall1037]

I have read a post and it’s says both belts need changing every 100,000ks

[@Tedkelvin]

Hello. Nice vid. I have a problem with my Tdv6 2.7 after HPFP replacement. It has the P0088 fuel pressure too high fault and the car is in limp mode. Forums say the HPFP has timing marks during installation. Skipping this will trigger the fault... Is this true.

[@Tedkelvin]

Subscribed by the way.

[@rawtoasttv424]

HI Ted. The HPFP is 100% not timed into the camshaft on this engine, (2.7 Tdv6). The LR4 3.0 twin turbo is timed in tho, so they are maybe on about that engine on the forum.

[@georgsvidlov3886]

Did you get your issue fixed Ted? Having the same issue, unable to fix for the last 2 months :(

[@Buliwif]

Where can I buy that belt kit?

[@rawtoasttv424]

I got mine on ebay

[@simon-mouse8739]

Really tough job and well done for taking it on. This is how Christian and Vera did it in their friends D3 kzbin.info/www/bejne/nX2XYnpnpJ2hjZY as it may help others too.

[@nicknick-ht5dv]

hello did you see lr time

[@rawtoasttv424]

Hi nick I dont know what lr time is can you please explain please.

[@nicknick-ht5dv]

@@rawtoasttv424 hi there is KZbin channel called land Rover time they do work on there disco 3

[@rawtoasttv424]

@@nicknick-ht5dv I've not seen that channel, I will have a look at it tonight.

[@buffi944]

I wonder who was the clown or clowns that designed this car