Lane Shark LS4 Brush Cutter Takes on Winter! My First Impressions

I'm putting my new Lane Shark LS-4 Bush Cutter to the test today to see what all the hype is about. I'll also be giving my continuous flow (C-Flow) third function kit that I installed recently a good workout as I use it to power the Lane Shark. With some fresh snow on the ground and the branches beginning to overhang my trails, there's no better time than the present to put this to work! Here we go!
Lane Shark USA
[e-mail]
[phone]
lanesharkusa.com
Facebook: / lanesharkusa
@LaneSharkUSA Instagram: / lanesharkusa
Dealer Locator: lanesharkusa.c...
Lane Shark LS-4 Brush Cutter shown in this video:
lanesharkusa.c...
C-Flow 3rd Function Kit shown in this video: (tractor specific)
shop.laneshark...
Tractor shown in this video: 2012 Kioti DK40se HST Cab
@LaneSharkUSA #kiotitractor #kioti @WRLongInc #hydraulic #tractorattachments #tractorimplements

[@LaneSharkUSA]

Thank you so much Sandy! If anyone has any questions about our products, we are happy to chime in.

[@ada-yw1bb]

Can I use this with my existing third function valve ?

[@LaneSharkUSA]

Yes, as long as it's a true electronic third function valve. @@ada-yw1bb

[@paulsims6888]

Probably you just need the return line to dump it to the sump. Not the valve. The same as a post pounder, no restriction on the return line , otherwise damage will occur when you turn it off.@@ada-yw1bb

[@Gunner1972]

Its cool, but not $7000 dollars cool!

[@BrandonVeal-m5t]

Tell that to someone cutting brush with a pole saw or snips in the snow, even worse in the summer with the mosquitos and heat lol@@Gunner1972

[@bruceaplin]

Sandy, That's a beautiful thing 💛

[@judyschepp8748]

WOW!!! Talk about a trimmer on STEROIDS 😮😮 Cool, Sandy. Thanks for sharing💜💙

[@travelledwithteens1522]

SWEET!

[@PDeker]

It sure does a good job, and a fun video to watch. Thank you

[@toddpacheco4748]

Sandy , you looked like a kid in a candy store or a kid at Christmas time opening up that big box 😮😊❤

[@sameaston1301]

Sandy: "I'm gonna lift this thing up to pretty much head height." - proceeds to cut branches 15' in the air 😅 That thing is slick!!! Game changer for paths 😁👍

[@sawingwithsandy]

hahah I couldn't help myself

[@mikewatson4644]

Maybe Sandy is a lot taller in real life. The camera lens will change a lot of things

[@g6pintoj]

Your landscape in the woods look so good!

[@tjjewell4115]

Sandy, your new Lane Shark seems to be the Cat's Meow for your trail clean up, great job on the install and demo.

[@saintaugustine1715]

Good morning Sandy it is working out nicely I like the way it tilt side way almost like one of those you see on a tractor from plubic maintenance off road but there is more like a backhoe and it sure beats the heck out of brache cutters and pole saw and a lots faster lol have a great day

[@Jimmyfisher121]

That is some beast Sandy, I can see you are going to have a load of fun with that monster, the smaller trees you can just put it over the top and just bring it down on it and the tree vanishes. Jim from Scotland.

[@natedscate]

A fancy toy indeed, doesn't get any better than this

[@larrykluckoutdoors8227]

Works great, now to pickup the branches

[@johndsmithkoipondgarden.878]

Beautiful thing,....game changer for sure.

[@delmanicke9228]

Wow that certainly makes easy work of that type of job. Pretty sure I wouldn't want to be standing too close to that piece of equipment.

[@littlegriffoffgridalberta6837]

Wow ! Sandy that is quite a set up :) I have watched you out there in snow up to your " " " & trying to chainsaw your way through ! Such a nice machine to reach up & get the ones that will just slap you next year or big snow, Awesome change for your work place :))

[@kensmith4918]

what a way to have fun

[@sawingwithsandy]

I'm with ya there Ken! Drinking sludge while taking revenge on those branches sure is fun for me haha

[@user-scooter1965]

Wow Sandy, that Laneshark is just the thing you need to keep your trails open. Man toys are a beautiful thing.👍

[@carltrano1325]

That is a slick cutter.

[@PYGolf]

Man, your videos are making me wanting to spend money. Love your channel. My dad and I bonded over tractors when I showed him one of your videos before buying the tooth bar 🙏

[@mr.lynnrosaasen8218]

Slick as a hot knife in butter!

[@sawingwithsandy]

Absolutely!

[@johnaddis1022]

Just got in and had to get to your channel, Masterpiece equipment you have now, the snow worked in your favor bringing the limbs down lower so it cut them where they would be higher up off the trail. You may get calls from your neighbors to come and cut their trails / roadways now. As I said before Awesome! Stay safe and warm we are in the teens here in N GA as is much of the country. John Toccoa GA Brrrr! 👍👍👍

[@wallaceviviansadventures2095]

That's the rig there Sandy make nice wide paths. take care

[@jimmaskell7537]

Cutting limbs inside a nice warm tractor sure beats doing it by hand 👍

[@dougpark1025]

I liked how this worked. Stick your landscape rake on the back and use it to rake up the branches...

[@robertschmidt6383]

I was surprised to see the vertical position. That's pretty cool feature.

[@bay9876]

Bush Cutter sounds like ¡Arriba!" ¡Arriba!" said by Speedy Gonzales to speed things up. Of course Speedy can't speed up this type of work. Nice video and a game changer when walking behind and slapped in the face with a snow covered branch.

[@sawingwithsandy]

Thank you! Yeah sure will be nice to have the trails finally taken care of. They've been getting overgrown for quite some time here

[@knkknk9971]

Dang it, now I have another another thing to buy. Haha. That attachment is awesome and I could use the heck out of it.

[@Andrew_From_NB]

Right on Sandy! Pretty happy for you buddy! Great demonstration and review! Would like to see how it is positioned from horizontal to vertical. Thanks for having us along Sandy! I always enjoy my visit! Take care! Cheers! Andrew from NB :)

[@hayesrutherford9415]

Really great video, nice bit of kit.

[@jamesthomas1967]

I like the new machine

[@sawingwithsandy]

Thanks James

[@DavidRobinson-mx6cl]

Yes sir, that is a great implement to have year round !!!!! Thanks for bringing it to our attention brother !!!!!! Going to look into this for sure !!!!!

[@TheBeardedCarpenter]

Howdy Sandy- that’s quite an addition to the goodies. Very enjoyable to watch. Take care and stay warm. God bless

[@sawingwithsandy]

Thank you! Sure is howling out there as we speak with the snow and all that.

[@TheBeardedCarpenter]

@@sawingwithsandy Yeah, we’re dealing with some nasty stuff here in the Ozark Mountains

[@careyhaner]

That thing is a beast. 😮 So 😎 cool

[@arkansasboy45]

Now that is a gane changer for sure. So much more efficient then the alternative.

[@sawingwithsandy]

It sure is nice being out of the elements in the cab I found

[@clubdoraoutdoorsandfirewood]

Well Sandy, looks like you have your self a very handy tool. You may be able to hire out and make some side money. The set up you have what’s the cost to buy and shipping? That really looks like a tool to definitely have around. Glad you could get out and try it out. Great time to trim, less chances of disease getting in the trees. Great video.

[@marvindiamonjr.9631]

Well, that works slick! I can see where a tractor cab would be an advantage using that particular implement. You just have to be careful you don't poke an eye out on a protruding branch stub when you're walking down the trail. 🙂 Keep up the good work!

[@billyhaddock5540]

Congrats Sandy, on getting the use out-of ur new Lane shark LS4 Brush Cutter. Have a couple of Beers on me when u get finished. Notice that i had seen the cabin that u had built. I had seen those brush cutters being used on an excavators.

[@sawingwithsandy]

Hey Billy! Great to see you checked out the cabin! Those units on the excavators ever neat too!

[@TheZigZiggy]

That's very cool. I would get a spring hanger for those hoses before they get hung up on something. 👍

[@sawingwithsandy]

Good idea about that one!

[@yvesjolicoeur747]

Its a beautiful thing! Got to admit that because I am so used to a Bush hog, when you made your video on the LS4 I thought you were slightly out of season for Ontario. Then you come out and use it in winter. We have to maintain a very similar woodlot as yours and I can see the benefits of that tool. And actually using it in winter along the edges of the trails is perfect as that is when the branches come down to their lowest position. Lucky you got a cab ....thanks for sharing

[@sawingwithsandy]

Hi Yves! Yeah you're right about the ability to use it in the winter. Without that it wouldn't be nearly as helpful for me as it is. I'll be out all winter long with this as well as the summer I"m thinking. Really keep things cleared back. In the winter with the branches weighted down it allows me to see what branches are the culprits and take care of them. Hope you're enjoy the new year! See you on the next video!

[@CaliforniaElectricSpider]

Great video Sandy, keep up the great work. Thanks for keeping our city safe!

[@buddyreed2623]

This tool resembles what is used along the interstate roads in some states near me. Some states do not need it because they just don't have trees growing the interstate roads. The cleanup may be just a matter of mulching it up. That could be a good thing for the trails. Have good days!

[@sawingwithsandy]

Those are neat units on the interstate. I've seen those as well. Sure allows me to get my trails back in order quick

[@lumberjill6598]

Pretty cool! Im curious how that blade holds up. Were there any knicks when you were done? And does one sharpen it like a lawnmower blade? Makes me smile to see you so excited! I see you having lots of fun creating constructive destruction with this. Have a wonderful week Sandy! 👋👍🥶

[@russellbelliveau1694]

Very impressive, I’d like to see how it pivots, maybe I missed it?

[@SevenOaksOutdoors]

Great video sandy!! I’ve always wanted one of those! 😊

[@leslubiesdetienne]

Very cool attachement! First time seeing one on a front end loader and rotating!

[@john_the_miller]

Another great video. Just wondering if you could do a video showing how many positions the Lane Shark has and how to change them. At 450 lbs, you are not moving that by hand.

[@kenbowers8423]

Good morning, Sandy. I like it. It's definitely a game changer for your forest management, and it's so versatile. Greetings from Peterborough.

[@sawingwithsandy]

Hey Ken! I'm looking forward to finally getting all the overgrowth cut back. Think this is just the ticket for that

[@danielmarkleblanc1800]

Wow, that's a nice piece of equipment. Great Stuff Sandy!

[@sawingwithsandy]

Thanks Daniel

[@jamesmoore6156]

Awesome equipment. I think the perfect setup is to have a fail mower on the 3 pt to mulch what you cut down.

[@jeffhuffman5433]

This lane shark is an impressive piece of equipment. It seemed to cut the limbs very easily and I have to agree. It is a game changer. I'm sure all your trails will be clear of tree limbs very soon. It's always good to get a new toy. That works this well. Great video Sandy.

[@bobwollard9105]

Sandy, it looks like you've got a winner there. I can testify that walking trails with a chainsaw, loppers or a hedge trimmer is no joy. Especially in the summer in Texas. Im going to have to do some research on your new tool. Ive got several miles of forested trails and a tool like this could really speed things along.

[@sawingwithsandy]

Hi Bob! Absolutely. Hauling around all those tools sure wore me out as I did that for years as well. I'm thinking this will help me get things done alot faster for sure. I"ll keep ya posted with more videos in the future with this

[@noel3065]

Yes those brush cutters are impressive, and you will definitely be glad you got it. And you looked like a professional in stalling that 3rd function kit. Good job Sandy

[@cowman540]

been wanting to get one for the farm .they are great from all the research i have done with people that own them but i cant afford one rite now but someday i will have one on the tractor

[@sawingwithsandy]

Thanks for checking out the video. Yeah they seem to work as advertised. Quite the tool I'm finding for all my trail maintenance.

[@ralfnjan]

Just need to watch the torque on the loader arms and frame, especially when low and to the side. Stumps! Loaders aren't made for side loads, just front to back, up and down. I just spent a month trimming my trails, flail mowe4, then chainsaw, polesaw and lopers. This would have been welcome.

[@scottjones5221]

GAME CHANGER ❤ nice to have 😊

[@sawingwithsandy]

For sure Scott!

[@deprived56501]

looks like you enjoyed that too much😁. Sure beats having snow down your back, or anywhere. Good vid. Thanks.

[@sawingwithsandy]

For anyone who knows the feeling of snow landing on your head and going down your back they probably cringe at the sight of snow covered branches like that haha. I know I do

[@contrafax]

I think I remember you making a couple of videos of you cleaning up your trails. This looks like fun.

[@sawingwithsandy]

Yeah up until this point I was going along with the pole saw which is fine and all but after walking for so long with the pole saw I had enough of that haha

[@critical-thought]

Very nice. I have an inordinate amount of fence line and trails that are surrounded by trees and brush. That does indeed look like a real time saver. One thing I would do right away is put reflective safety tape on all edges of the cutter deck. Not just for the obvious, but also so there is no question where its edges are when in use.

[@SasquatchBunyan]

That is definitely a game changer, especially for your trails. Sweet!

[@sawingwithsandy]

Thank you! Sure seems to get things done in a hurry!

[@alwebster9052]

Nice work ,and yes its gonna get used a lot I see

[@tomt8320]

Hi Sandy. Great video! You have that thing way up there. This looks like a solution for establishing initial logging trails.

[@sawingwithsandy]

I was surprised just how high up I could reach. Will definitely keep those trails cut back

[@wallacefrey6247]

Doing the trails for the first time takes the longest. Next year all you have to do is start at the bottom and drive up one side of the trail then back up the other side,then raise it up 3 feet ( You can go 4 feet but I think 3 feet leaves the sides cleaner ) and repeat as many times as needed.

[@sawingwithsandy]

You're right there Wallace. After years of growth and not being cut back it's taking time but about 100x faster than me walking haha. Once I get the hang of this I"ll be cutting back reguarly much faster like you said

[@carlmclelland7624]

Sandy, you answered one of my questions... the stability of the tractor with the mower offset, tilted vertical and raised to its maximum elevation. How's the stability if the tractors on a side slope, or did you encounter that? I would say to offset it when operating horizontal. That way the tractor remains on the road surface rather than the shoulder. It looks like you've got a pretty efficient new toy there, just be careful with it while you're learning to operate it. Has your tractor got hydrostatic, or manual transmission? The hydro would make it even more efficient with regard to maintaining a desired speed. OK... go clear some more roads!!

[@sharpshorts]

A super implement choice Sandy !!! Looks like it works excellently (the install video was great too). I was wondering whether it could be turned vertically for clearing along the sides of trails as well as lifted in the horizontal position for overhead branch clearing -- this video answers those questions perfectly.

[@sawingwithsandy]

Thank you!

[@brianmills4891]

add a brush grapple and you'll clean up the clippings with no issue

[@sawingwithsandy]

Great idea right there Brian. I think for now the snow may cover everythig up before I get around to cleaning it but in the spring I"ll run along with my landscape rake to tidy up for now

[@carolewarner101]

The poor man's forest mulcher! It looks for all the world like the blades on our 3 point hitch brush cutter, just attached to the front and extremely manipulatable...is that about right? I wonder if it can also cut fields like our brush cutter. I really like the idea of being able to have the cutter in front of me so I can see what I'm cutting, when to raise it up slightly due to abrupt elevation changes, etc, vs pulling it behind the tractor and bottoming out on dirt or rocks before realizing it. Might be worth selling the cutter to get one of these if it can do what you're showcasing here as well as roughly mow our fields and roads.

[@brianmills4891]

I saw your comments at the end about stability. Looks like you've got pretty flat areas, so probably not an issue in those cases, but wondering about slope potential. Of course it depends on the tractor setup, but I've got a DK45HSE, so very similar to what you're running

[@sawingwithsandy]

Hi Brian, I'd imagine it would be even more planted with an implement on the back for stability.

[@brianwestveer9532]

I had those questions about the hydraulic oil temp, thanks for addressing that issue, I think that Gord Potter from GP outdoors should have one of those, I don't know how close you are to him,,he told me once he is north of Haliburton

[@sawingwithsandy]

Hey Brian, hope you're well! I've been over to Haliburton a number of times. Real nice area.

[@frankdrahos8569]

I love the looks of that outfit! I just wonder if my tractor has enough implement flow to run one. Thanks for sharing your experience.

[@sawingwithsandy]

Hi Frank. Good question. they do make a LS3 which is a slightly smaller version of this with a lower gpm flow requirement as well. I'll be sure to keep you updated how things go for it as I keep using it. Thanks for coming along for the video.

[@LaneSharkUSA]

Frank, the minimum pump flow requirement for the LS3 is 5 gpm.

[@frankdrahos8569]

@@LaneSharkUSA That’s with your 3rd function plumbed in or is that an absolute?

[@johnt2442]

Nice piece of gear. It should help with wear and tear on equipment from the branches. Is changing from horizontal to vertical manual or hydraulic?

[@aldredske6197]

Hi Sandy!!😀😀 The Lane Shark is a really nice mower. I was wondering what it was going to do when you moved the loader and I was right. It stops flowing to the mower. But that's not the worst thing. You just have to get it positioned and let the mower catch up then move into what ever you are cutting. Overall I think it's a nice setup for the average tractor. Take care my friend!!😀😀 Logger Al

[@sawingwithsandy]

Thanks for checking out the video.

[@Z-Bart]

There's nothing like a branch slap to the face in sub zero temps. Looks like you are eliminating the threat.

[@sawingwithsandy]

I sure have had that a time or two on the snow machines. Wakes me right up haha

[@andrewscott2866]

This is awesome!!! I'm continually loosing ground on my trails to the underbrush. Literally

[@job38four10]

I think you need a 4th function so you can rotate the cutter from cab, that would be even better game changer to the game changer........

[@ericl4865]

Mine was ordered last week...should arrive in a couple of weeks. Great video! Stoked!

[@sawingwithsandy]

It's quite the attachment. I'm really liking it. Wish I had one years ago

[@stevebradish7055]

I was waiting to see how you changed the orientation of the lane shark. Manual off the tractor or hydraulic from the operators seat?

[@sawingwithsandy]

Hi Steve, great question. I've got a separate video coming up soon that will show the way you switch the different positions. It is done manually by getting off the tractor and raising up the loader.

[@michaelaversa5572]

Great video Sandy ! I am currently looking at these for a JD5320 and this vid helped a lot ! Looks like a handy little tool.

[@sawingwithsandy]

Thanks Michael!

[@09FLTRMM77]

MM77 Approved 👍🏻👍🏻

[@marlonasuncion-oc3hs]

Thanks!

[@sawingwithsandy]

Thank you for your support! I appreciate it greatly!

[@greybeard5774]

Quite effective thing must admit 👍.. but maybe it would make sense to install a protective grill in front of the tractor's windshield .. just in case .. some flying branches can cause a lot of trouble.

[@sawingwithsandy]

For sure. I'll have to see how it does with the brush flying around. So far I haven't noticed anything flying around but worth watching for sure

[@robertwazniak9495]

Nice piece of equipment there Sandy. How hard is it to change positions from middle in front to offset to vertical? We sure get lazy in our old age, don’t we?😂😂😂

[@sawingwithsandy]

Hi Robert, you're right about that. As I age I look more and more to things I can use to get my chores done easier and faster. I'll put out a video before long showing how to do the position changes specifically but it's pretty easy overall. Have to lift the loader up and tile the cutter facing downwards and then there's a few pins to adjust.

[@Wheelloader__]

That’s the loudest rudest. Most obnoxious thing I’ve ever seen. I LOVE IT. Did any of the debris hit your windshield?

[@rodneywroten2994]

man I like it

[@sawingwithsandy]

Thanks Rodney. I'm liking it as well

[@exotictones1054]

I didn't realize that turned up side ways.that makes much more since.

[@sawingwithsandy]

That's the thing that really hooked me on it too

[@robbobcat7286]

I am very happy with you Spending 7k!

[@sawingwithsandy]

Thanks for checking out the video Rob

[@m9ovich785]

The only thing that would make that better is a PTO Hydraulic pump, I could hear it slow down when You moved the Loader controls Thanks Sandy..

[@sawingwithsandy]

Thanks Mike! Glad you came along for the video.

[@dmfor9001]

Looks like it makes clean cuts. Some of the township municipality hire in units for roadside that don’t really cut. They seam to shred and it looks bad and probably more disease pests could get into the tree

[@lennyross2813]

Goegeous property! I am on the fence with getting a adjustable flail mower or this lane shark. I need to clear some parts of my property. I want a flail mower instead of a bush hog (cutter) to bulky for my needs . I have a wr long 3rd function already on my branson 3520. I would need to add rear remotes to run the type of flail mower i would like. Any suggestions ?

[@sawingwithsandy]

Hey there Lenny! Thanks for checking out the video. I do find this property really beautiful in the winter as well. Peaceful for sure. I'd probably want to check that the third function that's on your tractor would work with the LaneShark and then depending on that that would likely give me some direction on which route to go. One thing that drew me to this was the ability to cut way up high along the edge of my trails as most of my trail work is overhanging branches.

[@jrygh8380]

This looks like an implement that would work well for me. Some concern because I run a DK5310 open station. Don’t want a face full of brush. Also, I have a factory third function. Not true third function. Would this work? Thank you for the video Sandy.

[@LaneSharkUSA]

As long as your factory third function is an electronic third function and not a diverter valve, it will work with the Lane Shark. You'll need to add a return hose directly to the sump of the tractor for a zero pressure return. Let us know if you have any additional questions!

[@MannistoCay]

That winding sound the hydraulic moter spooling up again? I could definitely use that up here. Have a great weekend Sandy. And without a counterweight.

[@sawingwithsandy]

Hey there neighbour! Yeah when I lift the loader some hydraulic fluid flow is directed away from the blades motor for a brief second so the speed slows slightly until I stop moving the loader

[@mikebenning896]

Awesome tool , however you better keep the glass company on speed dial , I afraid. 🤣🤣🤣

[@Cacheola]

Very cool!

[@JohnFarmer-u5q]

I have the ls2 there are a few designs that could be better but overall a good product

[@bigcampnewyork3586]

Might be a good idea for a grill quard?

[@sawingwithsandy]

Yeah for sure

[@york806]

Keep an eye on your HYD. hose..

[@sawingwithsandy]

Yeah for sure. Since this was my first time out with it there's a few things I"ll button up for next time like tying up the hoses and putting a hose guard on

[@willbass2869]

Nice piece of kit there. But I'm a number cruncher.... My thoughts on ANY piece of iron are: how many "sessions" will I use it for more than 3-4 hrs? Do i use weekly, monthly? Is it directly tied to production & revenue generation ? I forget how large your timber tract is, but just off-hand, I'd say rent one and cut primary trails for a week in summer, then use another week in winter to remove all the overhang, like in this video. For me, I'd have to use this on a semi full time basis (20 hr per week) for a year to justify a purchase; otherwise rent or hire out. Operations cost, depreciation, maintenance & repair is just too much for me on "specialty" equipment.

[@sawingwithsandy]

I can understand what you're saying there Will

[@bernysgunsmith3396]

Hi Sandy. I'm picking up my Kioti this weekend. I too will be clearing trails. That LS4 works great. Is it really $7K? Might need to save up for it cause it's awesome.

[@sawingwithsandy]

Hey Berny! Congrats on the new Kioti purchase. What model did you end up getting?

[@bernysgunsmith3396]

I got the CK2620. 25 HP with the front bucket, grapple and backhoe. Love it so far. Gets lots of use on our new 66 acres wooded lot.

[@lornesteed2417]

Hi Sandy.... My question is this... I have a John Deere tractor with a Deere third function kit. I wonder if i bought a Laneshark , would I have to change out the Deere third function to a Lane shark third function kit in order to insure hydraulic fluid not overheating? Anyway, it looks like you are having fun with winter for a change instead of struggling with it like most acreage holders do. Cheers!

[@sawingwithsandy]

Hi Lorne. That's a good question. I dont know for certain to be honest. May be best answered by Lane Shark just so I dont give you the wrong advice. Thanks for coming along for the video!

[@LaneSharkUSA]

Great question. As long as your current third function is an electronic third function, you're able to use that to power the Lane Shark with a return going directly back to the sump of the tractor. The return going directly back to the sump of the tractor is what prevents overheating issues with your configuration. Let us know if you have any additional questions.

[@Casey6996]

Hi Sandy Do you have enough oil flow?I think it is slowing down way too much to my liking if i had your model. I would assume that it need at least 60 liter a minute or 16 glm. But then if it dose the job and cut the branches nice and clean you must have a flow good enough for the machine