2022 Top 10 Tools from Germany and Switzerland based companies. Wera, Gedore, PB Swiss take the cake

[@alexmoll8372]

It was a great year for tools! I picked up almost all of those myself. The coin driver is a godsend for replacing batteries on certain small electronics. Bicycle computers immediately come to mind, but I'll randomly find other devices that have a battery door designed to be removed with a coin - ouch!

[@littlejimmy7402]

I've been close to pulling the trigger on the coin driver but I always come back to a question I think you can answer, is it easy to tear up an electronic device trying to change the battery with that thing?

[@chrischambers5482]

Slip in a little Doc. Putting a Japanese tool in your top 10. Or do you need to do a top 10 Japanese tool haul for 2022? Yep need to do that. Thanks

[@joehart3826]

Koken is so good it features in every video now.

[@kittytrail]

no problem mixing japanese tools with german ones, it's still Axis tools. you should check some of Beta offerings like the 1150HPC 180 HyperCut or their 1201E/DZ DZUS screwdriver since you've got, allegedly, a soft spot for those... 😼

[@banana_bread_at_work]

Was just about to search out a Japanese top 10

[@Mack_Dingo]

@@kittytrail Axis Tools, made me spit out my coffee🤣😂😂😂

[@martinsnibbor7691]

Those joker wrenches are no joke , I’m an electrician I use them all the time for compression fittings . Great review

[@danstheman33]

Those aren't the holding function Wera hex keys, those are the standard long ones. The HF version has a ball detent (a tiny steel ball bearing) on one side of the hex, which positively holds the fastener on the end of the wrench.

[@maxlvledc]

You should check out a fix it sticks set for carrying in your pocket every day.

[@maxlvledc]

"It's Glorious!" Catchphrase found.

[@davidgold5961]

9:06 I have a wrench which is patented in 1915 which has the exact same function as the wrench shown at this time spot.

[@georgeferlazzo7936]

Hello again Doc Thank you for another Great Video 👍 Happy New Year's to you and your family 👪

[@davidweston9115]

My favourites are not made anymore. Stanley Hurwood wooden handle No. 20, No. 45, from 1950s production. The handles and shafts on those are better than anything since. You can put a 1959 vintage Stanley phillips screwdriver in a phillips screw, such as in a door lock, and walk away from it. The screwdriver will just stick out of the wall as if it's glued into the screwhead. No magnets. And this is a heavy full length screwdriver with full length shaft. Then you can use that same screwdriver for 30 years and do the same trick again. Original price $0.20. I find with a round softly fluted wooden handle you have all the torque you need, but also can spin it freely and no need for a ratchet screwdriver. When Stanley switched to those horrible yellow and black plastic handles in the mid 1960s my dad went to all the hardware stores and bought all the remaining wooden ones. These days some German companies make wooden handle screwdrivers. Connex seem to have a nice set made in Germany.

[@apistosig4173]

Coin Drivers - battery cells / chainsaw fuel / bar oil caps - awesome

[@armindo54]

Can you provide a link for the Copen extenders you demonstrated after the Wera Diamond hex bit set?

[@hansangb]

@7:16 I love all things Wera. But those diamond bits are news to me. TY!

[@masoodamg6633]

It was great my friend. Your tools are one of the best. I also love good tools and buy them wherever I see them. I also have some of your tools and sometimes I bring them and look at them and enjoy them. Thankful👍👍👍👏👏👏

[@frank_texas7400]

I love knipex the most and I enjoy every second I get to use any knipex plier regardless of the task, also for screwdrivers Wiha is my favorite they just feel right , I just picked a wera beater and the handle is not for me but it outperforms anything I used before for beating, poking and prying, also got the wera joker combination wrenches and I am yet to use them but they feel like the are part of my hand on the ergonomics side, I want to bite the bullet and get a Hazet 1/2 ratchet and socket set but is hard to give away my proto cause i got the one with the spudge, I am an Industrial Journeyman electrician so German tools are my go to for a frustration free day

[@jonathanmark7751]

I really want that PB Swiss ratcheting screwdriver but it's $300 in Canada on Amazon.

[@kiyosenl.3889]

Try the LTT ratcheting screwdriver, very high quality and definitely a competitor, only around $70 iirc so good bit cheaper

[@Callelle6251]

@@kiyosenl.3889 The LTT driver is a joke. It's a $30 megapro, thats been made shorter and fatter (so it's harder to get into areas) and it's bit storage was shrunk so you can only hold 6 normal sized bits (compared to the original 12), and if you want to hold 12, you need to buy their proprietary bits.

[@kittytrail]

😹

[@gplusgplus2286]

Holy Eff, thats about 60-70eur here from a PB Swiss dealer. Online isn't always cheaper, often you see crazy prices for an item that is sold at one online shop / ebay.

[@kittytrail]

@@gplusgplus2286 it's not "being sold online" the problem, it's being in Canada in the first place... 🤡🛠️🌎

[@johnmoorefilm]

PB Swiss rainbow Allen wrench set is very good.

[@go5582]

It was a great year for tools!

[@diemman70]

You lied to us as the Joker wrench did make the list.😆 I like the Wera diamond bits. Picking those off Amazon right now. PB Swiss stuff is so expensive.

[@maikelbrito4016]

Nice selection of tools, Happy new years men.

[@toolrestoration]

A lot of interesting tools come from Germany , strong and reliable , Switzerland , chocolate and pocket knives can't go wrong !

[@ayubsayyed783]

Very good collection

[@dennisr6261]

Dont think u have the holding function L-keys right there, those have blue release slide instead of green on the holder.

[@joehart3826]

Yes holding function has a ball on the end of it

[@joehart3826]

Not to be confused with ball end hex's

[@ИгорьДемьяненко-ш2ж]

Пассатижи от Геадор - просто бомба!!!!

[@three-phase562]

Gedore angled pliers - circa 8 hours after the video and no longer available on Amazon!! I have the NWS long-nose version of this and they are great for panel wiring. Some great choices, thanks for the video.

[@pzwolski]

Is amazon the only place you can buy tools?

[@three-phase562]

@@pzwolski I can buy from other places, it just makes me chuckle when something linked on a fairly high KZbin channel on Amazon suddenly increases in price or becomes unavailable.

[@Jordan__Sloan]

The nws are must have, snap on makes one too

[@grooviefan]

Brilliant , no mention of the brand of the last wrench.

[@melgross]

I don’t like flexible shafts. I’ve found that you can’t tighten down completely. It always feels as it’s going to get damaged if you try. That pertains to every manufacturer I’ve bought. And if you bend it more than a few degrees, it doesn’t really grip the screw properly. But I suppose they have their uses. The PB products seem to be perpetually out of stock.

[@jackbateman6839]

Thank you for a wonderful! Your channel is great! Love watching your videos and great recommendations thank you. Looking for great new year Doc keep up the great work!!

[@derekatkins8494]

Love your videos! How about a list of tools you have used the most?

[@albau2640]

Where is Wiha?

[@clarkpitts5393]

A+ Video.

[@a8f235]

I have yet to find what I'm looking for, and it is firstly aimed at bicycle maintenance, but can be used for anything else with hex head. I want a P-handle hex plus(no ballhead) with holding function. I want the plastic/nylon handle to be as small as possible(Unior is the best here in my opinion). I would also like to have a knurled area on the metal(close to the plastic/nylon) to be able to more easily spin it around just with thumb and index finger. The loose T-bar style that Park Tool released is not of any interest because it is too thin and flimsy(given the bar slides freely) for me to consider using this as a go to tool(also it has no hex plus nor holding function). Wera does make something close, but their handle is gigantic for bicycle maintenace so it's just not gonna happen.

[@dutch1047]

Hello, nice tool collection. What is the extension socket can you please put the brand and model

[@BastiBig1988]

Looks very interesting! Some tool I never Sean bevor great !

[@fredthehead4603]

PB Swiss eschews the diamond tip screwdrivers and bits….if I remember correctly. So I don’t understand why this feature is better.

[@bruceefeatheblock]

Wera hex keys with the multi-coloured plastic sleeves is not great imo. I have used them for nearly 2 years. The sleeves need to be cut back to access resessced bolts/screws. Additionally, I have noticed that some my co-workers wera keys the sleeves stay in the holder and the the hex key comes out.

[@bimble7240]

6:41 Did you say "Pozidrives or JAS"? Are you confusing the two? Not at all the same thing.

[@thenarcotk]

the wera hex set is awesome, they have a ball end and are super tough

[@theplumbman7825]

Nice watch😀😀😀😀

[@PhreakDarkSoul]

No Knipex TwinGrip in the list? Or was it a tool of 2021? I don't know... the one I ordered was still not shipped and will not be before January 2023. :(

[@LucScheffers]

I have a not so good experience with the WERA flexible bit driver It broke on the first try tightening a screw. I checked with a regular scewdriver if maybe i overtightened it but i could easy turn it an other turn. Send it back to the seller, received a new one. On my bike headlamp, try to loosen a screw. It did turn, but not the screw but the driver outershell spit. When the return for this one came in, tried it on a screw. Same result outershell split. And even nr 4 with hex on it to tighten a brake cable on my bike. There were at least with 4 of these very severe quality issues which i did not expect from a more expensive brand like Wera. A big disappointment. Even if i get a 5th one i would not trust it to work when needed. So, my trust in Wera tools is sadly gone as well. Best advice, if you still want to buy one, or a Wera tool, don't let it lay around but test it first extensively before putting in it your toolbox.

[@7baer]

What kind of knife ceramic knife was that in your top 10 snap on tools?

[@danstheman33]

I love Wera, but I have a bunch of their diamond coated bits, and I haven't noticed that they're any better than quality bits without the diamond, including bits by Wera and other companies. I also can't feel or see any sort of diamond or abrasive texture on the bits. Frankly I think the diamond stuff is BS, I'm sure there are some diamond particles in there, but for practical purposes there really isn't.

[@kulothunganchokalingam2597]

Can I get the tools from the market. please guide me sir.

[@Tony-sy7ed]

Nice watch. Could have been number 10, or number 1.

[@RichardSmith-wr6go]

Picked up a little Bahco bit ratchet set recently, very handy for tight spots and as slim as using a screwdriver bit with a 1/4" spanner, also been buying Elora spanners - not all shiny chrome like Snap-on but a fraction of the cost.

[@deanharris7149]

Koke is great stuff. Surprized they don’t promote their tools here more.

[@fuloplehel]

Nice tools, I have most of the them, but not the japanese extensions. You have to make a separate video with the japanese tools that you have, I am sure you have a lot. Vessel, fujiya, engineer, olfa, tsunoda etc. I like japanese tools. But I am surprised that knipex is not on this list.

[@fuloplehel]

@HTR I have NWS and Rothenberger watepump pliers, I like the confort handle on the NWS tools, but from my experience knipex is the most durable when it comes to the heat treatment of the jaws. The tool geometry is also different.more efficient. The durability of knipex tools was confirmed by many videos and comparative testing. It is not the end game, but it is one of the best out there

[@chotuusian4127]

Nice tools

[@SajidHussain-lj5mr]

Eye lyke Innglish toolz 👍

[@martinelectrician5637]

Excelente selección.

[@michaelb9664]

They are Wera Hex Plus keys without holding function. The holding function have ‘HF’ printed on the sleeve and a ball bearing pressed into the ball end of the L keys.

[@michaelb9664]

@HTR yes indeed!

[@liveyourbestlife1513]

Lindstrom makes very good pliers in Switzerland and Sweden. They or a subsidiary of snap on.

[@hampuslagergren4693]

What about the wera hex plus HF have you tryed that one? Same one but with an extra function. Great video thow

[@georgebonney90]

Thank you sir

[@austinbridge]

Doc, I'm curious if you've tried out the Klein 32308 Adjustable Multi-bit Stubby Driver. I'd love to see it side-by-side with the PB Swiss!

[@lastbesttool]

Will likely happen. I will be addressing the PB ratcheting stubby compared to others. Stay tuned, and thanks for watching.

[@Automatizari_porti_Suceava]

The name or a link for japanese tool,thanks

[@VeniVidiVid]

“Take a few clothes off… Not fully stripped…“ 😂

[@nickslingerland4155]

Those Wera Allen keys are Super duper!!🏳️‍🌈 Heyhey

[@kmiodek1]

Your wera allen keys don't have holding function. It's basic hex-plus set.

[@reonapier3493]

The wear Allen keys are naff, in daily use, the key comes out and leaves the plastic behind. Good quality, naff design.

[@nomadr1349]

Yes, absolutely. Came here to say the same thing. After a (short) while those loose slipping plastic sleeves are atrocious. Nice looking though.

[@samuele5931]

Could you do Italian brands?

[@lastbesttool]

Do you have some you recommend? The only ones I have that come to mind are Campagnolo bike tools.

[@kiyosenl.3889]

Have you tried tekton's high torque series screwdrivers? Their tips are pretty average quality nothing to write home about HOWEVER their handles, i mean those things look funky but god do they give you just every bit of grip you could ever want

[@gl0sek]

What wera T-handle is better the one for hex bits or 1/4" squre? There are adapters either way so is there any difference?

[@cafecybernz]

I was wondering the same. For personal reasons, I want my screwdriver bits to be locked (so the bit does not get stuck in the fastener), but I want my 1/4" sockets to be immediately removable without having to push any button (All my lockable ratchet drivers have a quick spinner on them: it helps with turning bolts or nuts at first, and with making the sockets come off quickly). Even if I had liked the lock system on the T-handle hex bits, I've read somewhere that it sometimes unlocks itself due to the pressure of your palm on the button at the top of the T handle. So I am going to purchase two 1/4" square T-handle, one for screwdriver bits and one with a hex-square adapter for sockets (The adapter will be locked in the rapidaptor end of the T-handle, ensuring the sockets are easy to remove).

[@FISHDINHO]

Surprised no Knipex tools but nice selection.

[@horacerumpole6912]

Stubai (Austria) makes the best tin snips, and an asymetrical nail puller that is unbelieveable. Steetz tools CA.

[@iiredeyeiiredeye1569]

Have you tried Wiss snips?

[@horacerumpole6912]

@@iiredeyeiiredeye1569 Wiss, Klenk, Malco, Peddinghaus, Pelikan...

[@horacerumpole6912]

Midwest & Pelikan are the second best choice-

[@callishandy8133]

I like the swiss PB Swiss dead blow mallets. I have since years and years and so long one of these hammer from ?Gedore? germany. Both sides have plastic caps. I think I can change these if they are to old. The PB Swiss is better... ... because only one side with softer plastic but more expensiv. And I can buy different size/weight. It really hits good and the handle feels balanced. It is a delight to swing. And I got the Gedore angle head pliers. But my ery old oncle liked it. I can not write any thing, because only used once or zwice before my old uncle ask for these (=present for him). He is lucky. For very hard pulling not perfect. No linear power to pull something out. Nice for easy jobs , but not for muscle jobs perfect. Ok, for muscle jobs Knipex.

[@Johnwickpifpaf]

No knipex?

[@lastbesttool]

kzbin.info/www/bejne/sHPcqIqVa8eDrcU

[@TheStephen3417]

Can you send me a link that I can just click on? I cannot find the ones that you were talking about the hexis plus that you got called up out on. That said you said the wrong thing your first video. I couldn't find them the second video. I still can't find them. If you would please give me a link I could just click on and it take me right to him the ones that you got. I think it's a nine piece but I'm not sure it's in the video right now. You got both of them open one to the left one to the right and then that pleasant piece of plastic that holds them both together. But it's a separation in the middle so would appreciate it. And any other description you can give me about it or what it might have, what it will do, what it won't do. I sure would appreciate it. Thank you very much. Just to link so I can click on go right to it. Thank you!

[@lastbesttool]

Here's a link to the ones in the video regardless what I called them: amzn.to/3GrtZw8 And here is the Hold Function metric hex set: amzn.to/3WUWJTk Thanks for watching.

[@josephlara2339]

wow.

[@mukeshdwivedi7920]

Are these avbl in INDIA?

[@2121contreras]

Didn't see any nws on this list??

[@pzwolski]

Ha ha ha 🤣, how old are you? It is not about the best tools available, but the best income to youtubers from affiliation links from amazon. Click and buy, and give him an interest. That is all about in all these recommendations on youtube. I found only 4 NWS tools at amazon, so it is obvious, that he skipped this company. Too much effort, too little income. They recommend something only if they can earn some money from this recommendation. That's an ugly truth.

[@almanyaelektriktesisati]

Wera ist Nr 1 in Deutschland

[@Petesworkshop2225]

That wera auto spanner is kinda worthless. Got the smaller size, never found a nut I could use it on

[@amoslois4600]

You forgot knipex

[@charlesviner1565]

👍

[@johngisbourne7197]

KOKEN is japanese btw

[@wandererdinghysailingchann6917]

😅

[@boringsoaring]

Some of those tools are ridiculously overpriced

[@danielorozco1728]

Pb swisstools are way overpriced not worth the price they ask for, many other brands offer the same quality for even half the price.

[@_X_X_X_X_X]

With a lifetime warranty? I have a bunch of pb screwdrivers from my grandfather and they are like new

[@danielorozco1728]

@@_X_X_X_X_X dewalt has lifetime warranty in many of their hand tools

[@_X_X_X_X_X]

@@danielorozco1728 I did not know that. Thank you for the tip.

[@danielorozco1728]

@HTR but where are price drops of that brand?

[@Sw1sher95]

@@danielorozco1728you don’t know what good tools are yet. Wait till you get older. Pb Swiss is very reasonably priced for what you get.

[@MarkWright1963]

Nipex not K Nipex ask the Germans. You Yanks really have a big issue with “ pronunciation!

[@horste9237]

I'm German and it's Knipex. We do not have any silent "K"s.

[@freds4703]

Knipex. It’s pronounced Nye-pex. In German the K is silent

[@freds4703]

My mistake, Not exactly silent but very soft and quick. Look up online.

[@Lordsmobile_trap88]

Waste of time... All poor tools...