part 2 Fiberglass Bottom of Surfboard using Solarez UV cure polyester resin resin

Solarez is the future. It's fast, easy and economical. You can glass a board in about 1 to 2 hours! It saturates the fiberglass quickly and cure time is extremely rapid. Solarez sands better because it cures harder and the board comes out light and strong.Also there is no unnecessary waste. www.solarez.com

[@jasonmills6975]

Mike is like the Bob Ross of surfing. We need more of that in the world.

[@biffbaker9299]

Thanks, Mike. That's exactly what I was needing to know. My plan is to sand down the bottom to remove the gloss finish, then brush on a coat of Solarez Sanding Resin. I'm just trying to make sure it's watertight. Your videos have been very informative.

[@WahooInternationalInc]

Biff, Generlly those cracks are from stress, flex & or age. A coat of Solarez resin will seal the cracks but not much can be done to remove them... Thanks, Mike

[@biffbaker9299]

I have an older board with what looks like small cracks on the bottom. Can I sand it down and then use a coat of Solarez Sanding Resin to put a new layer on? Or do I need to use another layer of fiberglass? I've used Soarez products to repair dings, and I'm hoping I can use them again for this. Thanks for the GREAT videos.

[@jayc546]

@ Tyler I think it's a " thalco " squeegee. I use a 6" and they seem to work easier than the cheap plastic bond o resin squeegee. use either!

[@fredflintstone8048]

beautiful technique, thanks for sharing.

[@lowballman23]

Use Sun Cure, Non yellowing and crispy White/clear finish.

[@danstephens123]

Top notch vid! "it'll make it easier on the Sander...which will probably be you" Classic.

[@07LUTE70]

I notice you don't use a respirator doesn't that bother your breathing?

[@07LUTE70]

Can solarez be tinted ?I sanded too deep and removed some underneath color. Unless I can tint the solarez a translucent color I'm sunk. Oh this is on a guitar situation. You seem pretty knowledgeable about the product. Nice work by the way...

[@shrimptits5897]

why does there have to be different ounce fiberglass on the deck?

[@shrimptits5897]

and the epoxy resin from solarez protects against UV damage overtime right?

[@hunterschoephoerster]

How Much Solarez do you think i need to make a 5'8 x 19 3/4 x 2 1/2. I am doing a 4oz on bottom with a 4 and 6oz on top just like you did!

[@Sector9I65]

what kind of squeegee is he using ?

[@alpgirayaykut]

if UV act as a hardener, may be thats the reason of cracks to much hardness.. ??? :D