Laying Concrete Blocks! 💪 | Single Storey Extension #12

[@fredsmith8897]

So nice to see your attention to detail, especially blending into older inferior work. It's a shame some clients don't appreciate that old work must be rectified or you risk a inferior complete product. I'm sure like me you've had you fair share of those! Thank you so much for the video, really appreciate your efforts. The few minutes don't give justice to your hard work, but we still love it. Stay safe guys.

[@BuildWithAE]

Thank you for the lovely words Fred, much appreciated! Have an awesome week! 👍

[@MARTINA-gc3tq]

I too love those block/brick cutting machines. I can count the number of accidents I've had with them on the finger of one hand.

[@BuildWithAE]

They're a great bit of kit! Take care and have a great week 👍

[@jameswiggins5791]

You can tell that you guys genuinely are a great team and not just for the camera, such a complicated little build and no one is throwing their toys out the pram. You have lucky clients getting a professional job

[@BuildWithAE]

Thanks for watching and have an awesome week dude! 👍

[@marcopetrillo6867]

Core-hole drilling should be an Olympic event.

[@BuildWithAE]

Maybe for the Olympics in 2024? Haha, thanks for watching! 👍

[@stevetheengineer]

So nice to see such attention to detail, including gauging buckets

[@BuildWithAE]

Thanks for watching buddy! 👍

[@rubyandrenaetheminiatureda6988]

Great to see engineering solutions to overcome issues on-site 👌. Loving the KZbin videos gents 👍

[@BuildWithAE]

Much appreciated Shane, take care and have a great week dude! 👍

[@SteveAndAlexBuild]

Yes BT , that saw 🤩🤩what a beast . Bricklaying galore in this episode . Favourite part those cuts for the soil pipes , mint 👌🏼🧱👍🏼

[@BuildWithAE]

A fitting name indeed guys! It's a helluva beast! Have an awesome week dudes! 👍

[@SteveAndAlexBuild]

@@BuildWithAE 💪🏼😆🧱👍🏽

[@denty32]

Thanks for the nice long video. A1 as usual, your brickie is one of the cleanest trowels I have seen in a long time. Have a good weekend Guys

[@BuildWithAE]

Thanks dude! Have a great week 👍

[@brickrightbuildinglandscaping]

Reminded me of the old norton clipper saws great bit of kit. Everything is perfect crisp clean and precise. The planning is also perfect as is the prep work its just a perfect job all round James i love it brilliant mate top top job looking forward to the plates and steel work . It just goes to show the amount of hard graft and huge amount of brain work that goes into the ground works and the brickwork a lot of hard graft in that and youve smashed it . Justin Brickright 👍

[@richardhumber318]

Heck of a job guys!!! Doin whatever it takes to make it work. Nice!!!!

[@BuildWithAE]

Thanks for watching Richard, take care and have an awesome week! 👍

[@viankalobosvalenzuela7456]

Esta quedando muy bonita la extensión de la casa gracias por compartir sus videos, saludos desde Chile 🥰🥰🥰🥰💯💯💯💯🇨🇱🇨🇱🇨🇱

[@BuildWithAE]

¡Habrá más videos por venir! Gracias por el apoyo mi amiga! 👍

[@Daihatsu_Hijet]

This felt like a longer video 😁 yet I could have watched more! I just can’t believe more concrete.

[@BuildWithAE]

Thanks for watching Tony 👍

[@ExtremeEn3rgy]

I LOVE THESE VIDEOS NEVER STOP!

[@BuildWithAE]

Thank you for the encouragement buddy, have an awesome week! 👍

[@adrianwilding2912]

Great attention to detail lads, and looking forward to the steels going up!

[@BuildWithAE]

Thanks for watching Adrian, have an awesome week! 👍

[@thetallcarpenter]

Superb guys. 🤩😎

[@BuildWithAE]

Thanks for the support TC, hope you have an awesome week! 👍

[@KingsG82]

Nice work guys. Work standards look on point 👌

[@BuildWithAE]

Thank you buddy! 👍

[@ukpipeline]

Fantastic content and detail. Very much enjoyed.

[@BuildWithAE]

Thanks guys! Have an awesome week! 👍

[@amazing451]

Everything just falling nicely into place now shows the great planning that you guys must make from the start, even John's planning nicely getting Joe to core drill the shorter block. What's the purpose of the 2 short lenghts of DPC above the telescopic vents at 21.27 on the video ?

[@jeffyoung321]

Cracking job guys. Your attention to detail is impressive 👍

[@BuildWithAE]

Thanks Jeff! Take care! 👍

[@arslanali3632]

Hi, thanks a lot for this video i was searching for a detailed guide to the beam and block floor. Great job guys

[@BuildWithAE]

Glad it was helpful! Take care 😊👍

[@gazpatchosoup]

Job looking very neat and tidy. Why did you decide to use 90mm insulation with a 10mm gap rather than full fill with dritherm or equivelant? Are the u values better? Seems like its more difficult to execute to a high standard.

[@BuildWithAE]

Great u value

[@brianhewitt8618]

thanks guys, top job

[@BuildWithAE]

Thanks Brian, hope you have a great week! 👍

[@gdfggggg]

When I watch build with AnE I need to prepare myself and when it’s done I have to have a lie down with a Valium. Big respect tho 👍🏻🇬🇧

[@BuildWithAE]

Hahaha, thanks for watching! 👍

[@ninety1464]

Great work guys.. it's funny how the regs keep changing on stuff.. cavities are supposed to have 50mm void between the insulation and outer skin now.. i wonder what will come next

[@TheMikey4120]

Another great video! How will the floor be insulated?

[@tomball6267]

Great workmanship, pleasure to watch the videos. What tape did you use on the Kingspan insulation joints, not seem it before.

[@ETB9090]

Hi mate does 90mm thick kooltherm 106 in a 100mm cavity give you 0.18, inline with the recently updated part L, just wondering as Ive spec'd this on a job last year, which is getting built this year and wondering if it still complies or if I have to spec something else, do you still use this or have you changed to something else in a 100mm cavity, cheers pal 👍

[@BuildWithAE]

Kingspan Kooltherm K106 Cavity Board is a 90mm premium performance lower lambda insulation with a fibre-free rigid thermoset phenolic core, a low emissivity composite foil on its inner face and a water-tight, vapour-open polypropylene fleece on its outer face. It is used in cavity walls with a residual 10mm cavity. Please note the K106 range has a composite foil reverse facing. Features & Benefits Full fill cavity insulation Resists moisture penetration Water-tight, vapour-open polypropylene fleece outer facing Unaffected by air infiltration Easy to handle Easy to install Non-deleterious material Manufactured with a blowing agent that has zero ODP and low GWP Product Specification Thickness: 90mm Length: 1200mm Width: 450mm Board Coverage: 0.54m2 Pack Quantity: 4 Pack Coverage: 2.16m2 Thermal Conductivity (as low as): 0.018 W/m.K Please Note: This item is non-returnable due to being Special Order, Made to Measure or for hygiene reasons. Your statutory rights are not affected. Product Specifications Brand: kingspan Length: 1200mm Thickness: 90mm Width: 450mm Thermal Conductivity: 0.018 W/mK Edging: Square Edge Facing: Foil Product Type: Board Material: Phenolic Foam Pack Size: Pack of 4

[@BuildWithAE]

The Government has issued a new Approved Document Part L with guidance on works to existing buildings. The new edition of the Building Regulations Part L will come into force on 15th June 2022. The new 2022 Part L represents a significant step up from the current (2013) Edition, and includes an uplift in fabric insulation standards, improved U-values and increased thickness of insulation within extensions. The document below has been produced by Quadrant Building Control to help builders and designers to understand what the new requirements will be for domestic extensions. Typical construction details with insulation thickness have been included that should meet the U-values standards contained within the 2022 Edition of Part L. These construction details have been provided for some typical wall, floor and roof details often used within extensions. Transitional provisions are available for schemes that will start on site before 15th June 2023, but a Building Regulation Application will need to be submitted before 15th June 2022. U-VALUES FOR DOMESTIC EXTENSIONS New thermal elements should not exceed the U-values listed in the table below. KEY DATES CAVITY WALL CONSTRUCTION MINERAL WOOL INSULATION U-VALUE: 0.18 W/M2.K RIGID BOARD INSULATION U-VALUE: 0.18 W/M2.K

[@ETB9090]

@@BuildWithAE Cheers pal so it does give you 0.18 👍

[@DICEGEORGE]

at 16 mins why not use foam around the pipes?

[@stephenroberts9390]

Hi What are the white block you use & and are they expensive (keep the videos coming great )

[@benblundell1479]

Hi. Great vids. Did you use wall ties below the dpm?

[@benblundell1479]

Well did you? I’m building today and I need to know 💪

[@IzzytheBricky]

Very nice work lads! That insulation is a ball ache sometimes😂 That's a bad boi steel😮💪

[@rockandmeatroll]

What is that insulation called?

[@IzzytheBricky]

@@rockandmeatroll Thermaclass cavity wall insulation Loads of different names for it however 😊

[@BuildWithAE]

Thanks for watching Izzy! Hoping you have an awesome week ahead, take care 👍

[@antonyporter5045]

why not tape the pipes up B4 you put blocks back down ???

[@ETB9090]

Are those Celcon plus blocks

[@barryford7135]

Hi guys what size pipe did you use for the new water main?

[@robhall1]

Would love to learn how to do this

[@carlreed1000]

Great stuff. Who is your beam supplier?.

[@andrewpalij4691]

10 Mill gap for the insulation lol that would ruin most bricklayers nowadays, great channel and great work don't know how you get time to do the work and then the editing I only do short vids and struggle 👌

[@BuildWithAE]

Thanks for watching Andrew. Have an awesome week 👍

[@jezzhadley8624]

HI..Whats the tape used on the k106 please guys

[@BuildWithAE]

Hi Jez it’s there own product tape speak to there technical and they will show it to you all the best Tony 👍

[@aficio698]

Fandabydosee. 👍🤓

[@BuildWithAE]

Thank you! 👍

[@yorwerthedwards1045]

You guys are amazing 🏴󠁧󠁢󠁷󠁬󠁳󠁿

[@BuildWithAE]

Thanks dude! Hope you have a great weekend, we're almost there 💪

[@peterbell4154]

Super👍

[@BuildWithAE]

Thanks Peter! 👍👍

[@benkimber8285]

It’s funny that we now use tape to join insulation together. I’d be pleasantly surprised if in 5 years it was still stuck on. Is there a guarantee on that? The silver tape I’ve used is shocking. Gets wet and comes off so easily. Love to see a 50 year time laps on it… Enjoy the content as always 👍🏻

[@stanleycarling]

You never taped those other bends you flaunched over..so pointless doing those two.