Hi everyone! Let me know if you have any questions in the comments down below! Remember you can download the example files at www.theSketchUpEssentials.com/30Days
@truechristopherbond71162 жыл бұрын
How did you model the knight?
@leothelion2001 Жыл бұрын
Loving your videos how to do the same thing on my iPad sketchup though as far as importing the picture
@eithandaroo4828Ай бұрын
Thanks for learning
@Randor102 жыл бұрын
That was nice and concise. I downloaded the finished model, with is fine, but it may have been nice to include the flat images that you extruded in order to let us have practice with them. I know they can be found around the web, but I like to work on the same pieces you do. Thanks!
@Thesketchupessentials2 жыл бұрын
Yeah sorry about that - since I don't own the images, I have to be really careful about downloading and distributing images. If I had a chess board at home somewhere I probably could have taken my own pictures, but I don't think I do
@vuurtorengroep2 жыл бұрын
man you really are amazing, learning so much from you! thx a bunch
@Thesketchupessentials2 жыл бұрын
Awesome!
@SarahOttobre Жыл бұрын
Super helpful!!!
@spencerlarson2630 Жыл бұрын
W video as always!!!
@stump1822 жыл бұрын
This is awesome. Now if the grid goes down, I can 3D print my own chess board. 😀
@danielsmith5581 Жыл бұрын
Hello, I’m having problems push pulling the castle peace top edges says because it’s not flat I don’t understand do you know what I need to do thank you.
@sandraforbes7495 Жыл бұрын
I made both black and white components but After I copied and pasted the squares for the board, I lost the ability to adjust each separately as a component. I couldn't adjust the height of just the whites. I could only adjust each one by one. What did I do wrong? Everything else went great! Thank you.
@shanlee81 Жыл бұрын
Same here🤔. Did you manage to solve this @sandraforbes7495?
@b-rad-go7oe8 ай бұрын
I had this issue as well. Using Pro version I had to check the box Replace selection with component in the create component window. I don't know if this is a proper way or not.
@chityaye45827 ай бұрын
yes , in deskstop version, first you make white piece , then make it into group , then component , then ,copy , it will definitely do the work
@wilsonfineart2 жыл бұрын
Well done!
@Thesketchupessentials2 жыл бұрын
Thanks!
@bernieasis1592 жыл бұрын
very helpful
@Thesketchupessentials2 жыл бұрын
Glad it helped!
@chhnov12 Жыл бұрын
Hi Justin. Thanks for all this great stuff. I'm having a problem with the scaling tool. I create a circle and PP it up a bit and then click on scale but then when I drag a handle the clylinder is pulled over, in does not get smaller symmetrically. Any idea what I'm doing wrong?
@Thesketchupessentials Жыл бұрын
Tap the control key to go into scaling about center mode
@dilshadchicho70642 жыл бұрын
Tanks for you ..
@Thesketchupessentials2 жыл бұрын
Welcome!!
@KingBigBabyJesus Жыл бұрын
How can it be solid but not solid? Tried a different chess piece and the skirt with the notches had an arch instead of vertical walls and well lessons were learned alright. Can't push/pull a curved surface and can't use the solid tools because my chess piece was just a surface. Couldn't figure out how to make it solid so remodeled a simple one like in the video and work just fine. Slightly disappointing but moving forward
@tamarakepreyeomgbuayakimi.13792 жыл бұрын
Pls, did you do all this without plugins?.
@Thesketchupessentials2 жыл бұрын
I did it in the free version, which doesn't have plugins
@tamarakepreyeomgbuayakimi.13792 жыл бұрын
@@Thesketchupessentials wow! Thnks , if you can do this , then I can mate.
@INFI8NITI82 жыл бұрын
hi justin, you doing perfect job, in this case you a little mistake, in chess board, first left, down segment must be black, than second white & etc. wiith big respect, SU & chess lover from georgia :)
@felixezeogu68042 жыл бұрын
True !!! Lol ... In chess the white square always falls on the extreme right hand side. But the message was in using sketch up to draw not on how to play chess.
@Thesketchupessentials2 жыл бұрын
LOL - for your chess board, do a select, then scale to -1 and it'll be fine 😎😂
@INFI8NITI82 жыл бұрын
:))))) I dont need to scale my chess board, I modeled it right from the start. good luck
@santaclaus2883 Жыл бұрын
When I used the follow-me tool it left a vertical line on the outside of the piece. Did I do something wrong? I am using Sketchup Pro.
@santaclaus2883 Жыл бұрын
I solved my own problem, I needed to click on the outer edge of the circle before I completed the follow-me action. Thank you again. Learning lots :D
@nikhatsirguroh4128 Жыл бұрын
i can't seem to import images, when I try to import m only showing ketchup files, even if I try to search from the location where I saved the image
@loiclp1272 жыл бұрын
Hi where can I find the jepgs for the chess components ?
@Thesketchupessentials2 жыл бұрын
You're just gonna have to Google "chess piece elevation view" - I can't share those images since I don't own them
@loiclp1272 жыл бұрын
@@Thesketchupessentials ok thank you and great job I like to follow your lessons
@aliullahshaikh7316 ай бұрын
Display tray is missing in sketchup pro version
@Thesketchupessentials6 ай бұрын
Window, Tray, Default Tray
@driesrengle.9 ай бұрын
Why is there no pen tool in sketchup? Very unnatural to draw this with arcs.. not very smooth either
@anthonyalzhoury65792 жыл бұрын
how to unhide the photo on the pro version ?
@Thesketchupessentials2 жыл бұрын
Edit, Unhide All
@brandonjones50962 жыл бұрын
The basic follow me tool has always been glitchy. Its great when it works, but a total pain when it doesnt.
@Thesketchupessentials2 жыл бұрын
I find the desktop version tool to be pretty good as long as you preselect your path before activating the tool. Any time you have to drag along the path, things get...interesting, and the online version doesn't seem to want to preselect the path
@Godblessforeveryone2 жыл бұрын
❤
@SOSATIBLOODMOONАй бұрын
how to make a knight
@ArifahIriastuti Жыл бұрын
HOW ABOUT HORSE?
@MegaAbgt5 ай бұрын
Paint the whole figure not just half of it, and push pull