In this video, I install the LED front fang daytime running lights by Aiden James. Check it out!
Пікірлер: 30
@georgeof78 Жыл бұрын
I think Toyota put that mailbox looking thing to give the fog light some protection from getting dirty because the passenger side inner fender well is louvered and allows water and mud in. I think it's vented to allow cool air up into the intake.
@RydinNStyle Жыл бұрын
That makes sense, thanks for the insight
@kylecornelius2947 Жыл бұрын
So where did you put the fuse? Was the lid able to close with it in the left INJ port?
@RydinNStyle Жыл бұрын
kzbin.info/www/bejne/gZ62gGiVqZZojrM
@jonathancanfield60402 жыл бұрын
I got fang lights without a ground. Any idea where to attached the ground wire to the existing fuse wiring? Thanks for you time.
@RydinNStyle2 жыл бұрын
Ground wire hooks up to the battery ground, mounted to the inside body of the frame near the battery/fuse box
@mikebatista6042 жыл бұрын
What was the mod or as you mentioned “tweek” that was made by morimoto due to the different fuse tap configuration for the 2022? My runner won’t start when I have the fuse slotted in INJ.
@RydinNStyle2 жыл бұрын
There was a different harness that was needed and a different fuse location
@RydinNStyle2 жыл бұрын
I just posted a video on the update kzbin.info/www/bejne/gZ62gGiVqZZojrM
@mikebatista6042 жыл бұрын
@@RydinNStyle thank you!
@dailyambientandsoothingmus687 Жыл бұрын
What does INJ mean?
@playdixie Жыл бұрын
I have a question about the fuses. So I bought a set off Amazon. It has 3 different colors. White for driving, amber for turn signals, and blue for when full headlights are on. I have a 21 so my fuse box is probably very similar to your fuse box. I got the fuse ran to the INJ for the amber and whites -- no issues there . The blue lights are the issue. My lights have a 3rd wire (white in color). I can plug it into any 10 amp fuse and they stay on constantly -- which will drain the battery. The Amazon website comment says to run the white wire to the low beam positive wire and it'll come on when lights are on. Problem is wire isn't long enough to do that. So my question: is there a workaround in the fuse box so I can have my blue light? TIA!
@RydinNStyle Жыл бұрын
There are some 10A fuses under the drivers side footwell with a plug that can be removed to run wires into the firewall/engine and connect to the battery. I'm not sure how long the wire is. Also, there's a fuse that will get power randomly, even when the car is off, because the cars computer runs updates, providing power to certain fuses
@playdixie Жыл бұрын
@@RydinNStyle The wire isn't very long so I wasn't sure if there is a work around or not. I watched your updated video about your morimoto headlights and grill lights. I don't have morimoto headlights, but have Caliraised LED grill lights and mine will randomly come on. After seeing your vid, made me feel better about them randomly coming on. But thanks for reply.
@rustyjames8029 Жыл бұрын
I noticed you have a screen over your pro grill. Can you fill us in on that cool mod?
@RydinNStyle Жыл бұрын
It's the T-Rex grill insert, but will require modifications because of that front sensor
@ryanfrangie959 Жыл бұрын
Hey boss, I was in the process of installing the fang lights and due to the location of the inj fuse holder, i cannot close the fuse box with the piggyback plugged in, how did you close yours ?
@RydinNStyle Жыл бұрын
Mine closes but doesn't snap shut, it's a give and take with the fuse box cover because of where the required fuses are located in the 2021+ 4runner setup
@ryanfrangie959 Жыл бұрын
I’ve got a 23 and it’s close to closing but not close enough. I’m too worried about leaving it like that and water getting in
@RydinNStyle Жыл бұрын
@Ryan Frangie another option is to cut a slit in the cover to run the wire through
@ryanfrangie959 Жыл бұрын
The wires seem to fit just fine when closing it but it’s more or less the piggyback being too tall. Might try some stuff though
@Woodsfitness22 Жыл бұрын
Did you have to use t taps and connectors for the turn signal?
@RydinNStyle Жыл бұрын
Yes, that's what's required for proper function
@Woodsfitness22 Жыл бұрын
@@RydinNStyle thank you!
@Woodsfitness22 Жыл бұрын
@@RydinNStyle also how long did the installation take you?
@RydinNStyle Жыл бұрын
@@Woodsfitness22 taking off the bumper was the longest, but after that, it's pretty quick plug and play
@rachelraines89117 ай бұрын
So why didn’t you show where to hook it up electrically you just cut off and started talking about something else
@RydinNStyle7 ай бұрын
It goes into a 10 Amp fuse of your choice
@youngceez562 Жыл бұрын
Have you ever did your own work or your dad lol 😆 😢😂
@RydinNStyle Жыл бұрын
Lol, we work together, but I try to record certain parts to make these videos helpful