4Runner Lifestyle Fang Light Install

In this video we go in depth on showing how to install our all new 4Runner Lifestyle Fang Lights on a 5th Gen 4Runner. If you have any questions or suggestions on future videos, drop a comment!
Buy 4Runner Lifestyle Fang Lights⤵️
www.4runnerlifestyle.com/prod...
Shop Everything 4Runner⤵️
www.4runnerlifestyle.com?Product&
Amazon Link for T-Tap Wire Connector⤵️
www.amazon.com/Connectors-22-...
Amazon link to Add a Fuse⤵️
www.amazon.com/JABINCO-Circui...
#4runner #toyota #toyota4runner #toyotausa #4x4 #offroad #overland #overlanding #outdoors #toyota #4runnerlifestyle #fanglights

[@wesfields9322]

Wasnt a fan of the earlier models but im come to the conclusion the recent gen forerunners is the best looking vehicle toyota has made. Arguably most reliable to boot

[@dhubbs4]

It’s actually pronounced…”4Runner”.

[@aghamatic]

Let's Go! Been wanting to get a better fang lights video install. Thank you

[@cali963]

is it possible to tap these into the factory fog light switch so they turn on/off independently with the fog lights while still being a functioning turn signal as well? Hopefully this question made sense.

[@jerryc7016]

Great video ! Fang lights look great. I like the shackles you install on the front factory tow hooks. What size shackles are they?

[@kevinpirnie9211]

What is the function of the white wire and why is it not used? Is the wiring the same for the switchbacks?

[@Jackson-sg7si]

Is it possible to run these lights along wit raptor lights

[@emmagosda8620]

Will the sensor need to be recalibrated?

[@mackenziepappas2975]

Were these considered "plug and play"? I just ordered some and asked if anything extra is needed like the add a fuse and they said they are plug and play.

[@peakmean604]

What if I already have raptor lights on the add a fuse in fuse box, can I just use a T tap on the red wire to connect the red wire on the raptor lights?

[@mashthereal]

Same thing happened to me. I was still able to put the naked red wire into the back of the plastic tube like he did in this video and it worked. So my raptor and fang lights are going into the same 10amp INJ fuse.

[@carlosabalvaro8483]

He mentioned about some models or newer models that has one connector for the fog lights, mine has that one connector. Will it be a different connection/wiring if it is? Installed fang lights on mine and both front blinkers don't work anymore, left side fang turn signal works, but has made it hyper flash, even after disconnecting the fang lights, front blinkers still don't work, huper flash still there too. HELP😅

[@trentonbryant7738]

Hey did you figure it out. Both fang lights blink for me (hyper flash) but the regular blinkers just stay turned on and won't blink.

[@AB-88]

Wasn't that a solder and seal connector not a crimp?

[@chrisparish2411]

Connect the Fang Lights to the Morimoto DRLs Splice Connections: You will need to splice the wires from the Fang Lights into the DRL wiring of the Morimoto headlights. Positive Wire: Connect the positive wire of the Fang Lights to the positive DRL wire of the Morimoto headlights. Negative Wire: Connect the negative wire of the Fang Lights to the negative DRL wire of the Morimoto headlights. Use Connectors: Use T-taps, butt connectors, or solder and heat shrink to make secure, weather-resistant connections. Ensure all connections are tight and well-insulated to prevent shorts.

[@jonalberthacosta7039]

The link that you provide for the t-tap connector is not the same one that you actually used at the video. So I’m q bit confused in that part and I don’t know how the make it work. Can anybody help me with that?

[@jcquenson]

I’m having the exact same issue. They also say in the description at 4RL that it includes everything for install yet they say you need to buy additional parts and don’t even provide the correct link. Always a headache whenever you order 4RL parts.

[@jessicagibson7094]

What if you only have a white/black wire and a green wire?

[@tiffanygimbel5676]

You really have to have a second car to do this install. Because I would need a week of rest after getting all the bumper off. 😂😂😂

[@troywilliams1185]

Screw washing it first

[@alecgoralczyk648]

Can’t find an email to ask questions on the website. I finished the install for the switchbacks but the turn signal function isn’t working. The white running light works though. I have a feeling the White option was shipped to me instead of the Switchback. Hope you guys can help me

[@dennisnoegel6224]

Did you ever get your blinkers to work on the fangs? I have the amber lights and they light up when the car is running but blinkers are not working on either side.

[@officialdj_3]

Same here. I ordered switchback and they light up but no blinker function either. I’m thinking it may have to do with the white wire he said not to use?

[@kevincooper1897]

Your connection them to halogen...what about morimoto xbs?

[@AdventuresofPanda]

They use the stock connector so it'd be the same

[@KayKipp]

damn this took me forever lol

[@denversmith7206]

Do the triple fang lights install the same way ?

[@brianj1015]

Dude good luck i had to figure this shit on my own they dont answer at all

[@chipper4561]

Did you guys figure it out? I installed the triple fangs and they come on when I turn my car on and always stay on, the blinkers don’t work on them. And now my right front blinker won’t work.

[@mario-uu9wf]

What if I already tapped into that fuse for raptor lights?

[@mashthereal]

Same thing happened to me. I was still able to put the naked red wire into the back of the plastic tube like he did in this video and it worked. So my raptor and fang lights are going into the same 10amp INJ fuse.

[@amtldawson]

Same situation here. I had to rewire the raptor lights into the cabin fuse box under the steering column. Check the 4RLS raptor lights install video for details.

[@dhubbs4]

Same same 🤷🏻‍♂️

[@alexissmith1728]

What if you have raptor lights already in the inj fuse ?

[@nahomtedros9142]

I'm dealing with the same thing. Thinking about tapping the raptors into something... would be nice if they answered your question...

[@alexissmith1728]

Yeah I have very limited knowledge/experience. I’ve watched a lot of videos but that’s how I know things.. so trying to figure something else out on my own won’t work lol

[@mishaschmidt1880]

⭐️⭐️⭐️⭐️⭐️

[@chewminem2044]

I’ve done all the steps but I have zero dollhairs for this

[@DreamingAiStudio]

How long did this take you? It would take me 10 hours

[@anthonyrenaud5783]

Damn….thats way too much work for fang lights. I would probably screw it up anyway.

[@aghamatic]

Did anyone have issue w right blinker not working after installation? Yellow to blue and blue to yellow? Maybe it’s should be same colour wire connected together?

[@VxB9]

Yes I have the same problem. Did you find a fix?

[@aghamatic]

@@VxB9 well, I didn’t I just turned my blinker back to stock and disconnected all the t-tap but the fang light do turn on just not blinking during turn. My recommendation is not to use any t-tap but use a butt-connector. Spoke to my brother in law (mechanic)he said t-tap is the worst.

[@VxB9]

@@aghamatic Yeah I don't even have power to the right one. Turn Signals work fine, just power relay is faulty I think.

[@aghamatic]

I changed the old fuse to the two new small fuse. There is a big fuse, small and low profile ones. The OEM blinker comes with a low profile fuse.

[@MrCidsanchez]

@@VxB9are they working correctly now?

[@PatrickStone-bu2ve]

The fuse is in too out of shape steps phew where fuse what's fuse?

[@Yoyomanmanholla]

My eyes. The goggles do nothing.

[@rodolfolumbang4118]

Forget it,too much work😅