LEGENDARY CUSTOMS TECH TIPS: 4-LINK SUSPENSION INSTALL

[@manuelalejandro8972]

wow, Thank you very much, you just cleared a whole lot of questions I had, made it really to understand and actually took some of the anxiety out of the equation. Thanks for sharing.

[@chrismeyer6196]

We are glad that we could help. Little tips like this really help a guy sit down and figure it out at home on their own. Thank you for watching. Please subscribe and share.

[@michaelschindler4302]

Hi, Chris thanks for the videos. We are working on a similar situation but with a chevy frame. in looking at your 4 link kit I cannot find a one with what looks like the same rear mounting brackets as you have. Yours looks more square once you cut off the shock bracket, other kits look tapered. Can you let me know what did you used or what company you ordered from? Looks like a universal kit for many vehicles

[@dontrompas1312]

Golden

[@str8vtec661]

What the brand of the universal kit you were using? Would like to purchase this one for my 73 c10

[@chrismeyer6196]

I'm sorry I didn't answer this until now. I didn't receive any notice that you asked a question. I'll look it up and answer your question. Keep watching.

[@czayfman]

@@chrismeyer6196 this was 4 months old.. I don't see anything for an answer, as of yet, of the kit you had used..so im just seeing if you found that information yet.. thanks again and great video

[@JohnSmith-wb6kq]

Curious, looks like when you first welded the panhard bar bracket to the axle, you had the orientation wrong, then later in the video it's corrected, was that a fopar? I couldn't see how it was going to work with the original way you had it, great video though, very informative cheers

[@chrismeyer6256]

We did have to change the mounting point on the axle. It would have worked at the point we originally had it mounted, but it wasn’t perfect.

[@dave717785]

@@chrismeyer6256 The initial drivers side panhard pivot would not have worked at all with the rotation about the vertical axis. If it hadn't been changed it to rotate around the horizontal axis would have not allowed the panhard to rotate at all . The result would have sheared off the mount bolt or more likely torn the tubing right at the weld. Good that the error was caught and corrected before final welding.

[@sarblade]

when you say perfectly level, it won't be once a bed is put back on. I know you have adjustment in the set up, so can this lack of weight be adjusted out once the bed is put back on?

[@chrismeyer6196]

You are exactly right. With the 4 link suspension you are able to lengthen the arms or shortly arms. After the weight is on their all adjustments can be made to fit your exact weight. But what we describe is a great starting point.

[@sarblade]

@@chrismeyer6196 Thanks Chris

[@trevorstrauss9978]

Name or link for kit used pls...greatly appreciate it

[@LegendaryCustoms]

If you're installing on a 1955-59 Chevy truck; purchase the kit from JW Garage in Wisconsin. Otherwise any universal kit will work.

[@trevorstrauss9978]

I'm using on a square body shortbox

[@tonzi4268]

Will the weight of the bed not change the level of the top bar?

[@chriseason2785]

No, they can wind up the spring adjusters to raise or lower it.

[@9thgatedim273]

Question do u have to remove the body to 4 link a car

[@chrismeyer6196]

Technically..... No. There are several advantages to remove the body. You really need to watch your ride height. It will be very difficult to get clean complete welds in some situations. A great, complete weld is extremely important for safety.

[@9thgatedim273]

I'm doing a engine swap in my 56 Fairlane do I set my rear and 4 link up first or set the motor and trans first I'm.pullimg the y block out for an lsx motor

[@chrismeyer6196]

@@9thgatedim273 I would mount in all the weight so you know the stance. Also order springs accordingly for what your going to install. Sounds like a great project. Get the wheels turning!

[@9thgatedim273]

@@chrismeyer6196 thanks

[@joaquinsolis7071]

So could you say you want zero “toe” in your 4-link?

[@LegendaryCustoms]

@@joaquinsolis7071if you properly install the 4 link, your vehicle axle will be adjusted to replace n straight down the road. With a property installed 4 link, you can move it left to right and push either wheel back or forward. Measure, measure, measure! Thank you for watching! Share our KZbin Channel please.

[@32endorphin]

1-3 % pinion up ....or 1-3 % pinion down?

[@bavery76]

Parallel with the transmission. Depends how engine and trans sit in the frame.

[@approachingtarget.4503]

I bought a kit from chassis works way back in the day. When i got the kit. I kicked myself because i could have built it for way less then buying the kit.

[@chrismeyer6196]

Sometimes a kit is best for some that can't build it. They are pretty simple.