LeoVince Full Exhaust System Install & Sound Test! [Yamaha R6]

[@tomsjoinery5731]

Why is there no sound (8:46-9:52) and again at (11:29-11:46) also (13:36-14:11)

[@loukas1036]

music copyright

[@tomsjoinery5731]

Loukas oh

[@japethgarcia7161]

That's why. I've been thinking about it for too long I'm afraid.

[@TheKleb]

I'm sure you already have it all figured out but just giving you the option if you're flying to CA for SCMM and want to borrow my Duke 390 while you're here, you're more than welcome to 👍

[@r6lunaboxing915]

Moto, thanks a bunch! My Leovince Exhaust didn't come with instructions or anything but using your vid as a guideline when doing my install made everything clean & simple. I hope LeoVince realizes how much you've helped them in sales, I'm sure I'm not the only one who was sold on this exhaust by your R6 build series lol

[@Mukenin90]

Thanks for the italian credit on the exhaust. Sincerly a proud italian.

[@Alien590]

99% of the comments: Bruh take out the DB-Killer ^^

[@TheInja]

For reaaaallllll

[@williamdolezal9184]

But one and do it yourselves

[@natewheeler2818]

I've been on a Motonosity binge since subscribing 2 days ago. Safe to say I've found my new favourite motovlogger.

[@R1ACE]

2:40 Motonosity doesn't know his lefts from his rights

[@motonosity]

+Spartan III - MotoKnight Productions 😥😥😥

[@user-hs2hd7wp9g]

Basically a woman

[@jermfactor]

Last I checked you always need an oxygen sensor to monitor exhaust on a fuel injected engine even with a custom ECU flash. That's a very important part in the air fuel adjustment

[@RyanMcIntyre]

The ECU has its own A/F ratio it's trying to keep the engine running in, and uses the O2 sensor to maintain that. As I'm sure you understand, the factory has many compromises and concessions to make when determining the ideal A/F ratio to keep. For sake of argument let's say it's around 15.5:1. When I tune a bike I'm shooting for 13:1 up to 12.2:1 but the only way to correct this is by flashing the fuel table in the ECU or in a Power Commander. However, there is no way to change the A/F target in an ECU flash, so even with my wildly richer 12.2:1 fuel table settings, the bike will be trying to correct it back to 15.5:1. Moreover, Yamaha only relies on the O2 sensor up to 6k RPM and static fuel tables after that. It's just simpler to eliminate and disable the O2 sensor in the ECU and run the bike on a custom static table anyway.

[@TW0TIRES]

Crap ton has always been my favorite unit of measurement. I love the look of the new exhaust man! Great choice!

[@RuciosDubstepMixs]

I havnt seen ur vids a long time but I came back cuz I'm finally buying my own 2018 R6 and i love ur videos! Always man.

[@Quack_attack_]

What color did ya get ? I got a 2018 R6 in matte grey and gaawd damn do it look good

[@RuciosDubstepMixs]

@@Quack_attack_ DUDE ME TOO! I got a 2019 matte grey and its so so sexy. I purchased it with mods on it like a carbon fiber exhaust and fender eliminator and frame sliders and some race handles and it was so worth it

[@Mototzigane]

I'm here after watching the MT-09 exhaust video. Gotta say, nothing sounds better than a supersport 600!

[@gaby33510]

sound great! remember that, thats not the final tone the exhaust needs to break in before it reaches the actual tone that it will have. plus the slip on has an insert (DB killer) that leo vince say you can take out if you want to make it lauder!

[@alexcalzado1248]

Dude that's such a better sound . So much of a difference in sound

[@JaretCampisi]

God I love bikes. Sounds amazing man. Congrats. Great choice. 👏

[@SkellyWOG]

Nice video and nice exhort but bro why did the audio cut out 3 times in the video?!!!

[@Sayykoenmoto]

The sound, I love that sound with the leovince exhaust.

[@sarahgrassi9648]

Do a sound test is without the baffle

[@justanotherbronco4750]

I love how you can hear each cylinder fire right after you let off just those little pops right at the end😍🤤

[@sirforryan]

Sounds amazing!! Glad you did the weight diffence. Much love from the uk

[@elvisgonzalez7YT]

Wasn't the DB Killer on?

[@nWsquidasaur]

elvisge7 yes

[@SSmoothS70]

This makes me want to go get the new R6. Looks great, sounds great, good weight savings too.

[@joshfromscrapecity3997]

I love his install videos. He actually helps

[@brahmaputraa22]

I've been waiting for you buy a new exhaust. Awesome man.

[@madmike4128]

Man it sounds great I wouldn't expect anything else from Leo Vince

[@joshh694]

Woah motonosity is wearing my state's colors

[@Tom1k9]

Guys, he said he's watched loads of video's and this one was the perfect sound for him. It's already sounding gorgeous, i think taking the db killer out would just make it too offensive. He's got a baby and neighbors haha

[@4313max]

Take off the db killer :D

[@kolaAlakija]

4313_max I agree. Would love to hear it then.

[@jasongarriock]

Thumbnail looks so good😍😍

[@hunter3930]

You have inspired me for years now

[@valter1990]

Best channel on KZbin!

[@timcolvin6933]

Take the DB killer out of the pipe!

[@jordanroberts8512]

OOh it sounds so good!! That's why I like the way 600's sound over liter bikes

[@lyrasimo]

LOL you follow my advice for the pronuntiation , just a little thing :the "e" in LEO has the same sound of the "e" in VINCE, keep in mind , good job have fun with that bike bro.

[@BATHKEBR]

@Motonosity is representing the badgers oh that awesome

[@pearsonebfd1]

Sounds 100% Better !

[@chrisw.3000]

You and I are gonna have to link up some day. I gotta check out the R6 and you gotta check my R1. One day I'll make the 2hr ride to ATX

[@david.c888]

Pls no db killer

[@BirdsEyePortugal]

yes remove the db killerrr

[@ridingweeb4801]

seems like a decent choice on a 4cyl bike.

[@PropDusting]

The audio is missing at 8:50

[@metakmoto]

Dope video man. Thanks for the tutorial. Love that bike and the new exhaust looks super clean!

[@motonosity]

No problem, thanks a lot!

[@Unknownas1337]

Hey Motonosity ! Nice video man!

[@RRRob919]

Sounds great man, even with the baffle! Looks even better as well haha cant complain!

[@talltexan4710]

You should look into your throttle and throttle bodies being limited during full throttle. That might get you an extra 10-15 hp!

[@Seth-ix1il]

The R6 sounds so amazing

[@Seth-ix1il]

Get rid of the db killer

[@donjuan1933]

That was nice and clean. Good job Motto!

[@scottsog7635]

Hey Brent, sounds like a beast

[@HemivsNinja]

I had a similar set up in my ZX6R concerning the servo I actually left the servo in place and just removing the cables. No flash or servo buddy needed. As far as the bike knows the servo works just fine

[@asifshaikh-zd9zl]

One of the best exhaust heared ever

[@motomania2902]

She's a real bike now 👌

[@weth56]

I'm glad I'm not the only one mad about the s killer still being in

[@motonosity]

+weth56 you're legitimately MAD? lol

[@weth56]

Motonosity you'll never know lol

[@R6_Nitty]

Bruh take the silencer out

[@R6_Nitty]

Furious_Deer_gaming no.. it's not a baffle. The baffle is inside the can itself surrounded by fiberglass packing. Look up race baffles. The cap on the end is there to lower the db levels at tracks with db restrictions

[@Jonathan.Moberg]

R6 GUY It's not called a silencer or a baffle, it's called a db killer. As you said it kills db but it's not called a silencer the silencer is the whole "can" at the end of the exhaust system.

[@spoony0]

R6 GUY well full exhaust systems are often loud enough with the silencer in

[@ahmadantrax1292]

take out the db killer

[@danteestrada-gray5703]

R6 GUY but have a Subaru as your profile pic

[@zacoriv3593]

The jazz he got going it a1 no lie

[@escopes2123]

THAT THING SOUNDS AMAZING!!! congrats

[@scootermichelli9885]

Test drive. So ready to see you drive it!

[@sgarner44]

Great walk through! Really made putting a full exhaust on less intimidating. Time to place an order and get to work.

[@johnnysprocket1722]

Finally! I was looking forward to the video yesterday, and then I saw your Insta gram story about how it got late and I was just like "alright, I'm happy. I forgive him" 😂😂 keep up the awesome Videos bro!

[@joshuaberry3168]

Your r6 is the best mate carry on mate love your bike

[@sportsterrider37]

You should of kept the o2 even with a ECU flash. It only does small adjustments but does so for things like temp changes. Always install everything loosely before you tighten.

[@danieldeutschen]

A slip on isn't the same as an end can. A slip on is an aftermarket exhaust which just replaces the end can, so it slips onto the original headers. If you look at the complete exhaust system, you got your end silencer, headers and, depending on the bike, a mid silencer

[@motonosity]

+Daniel Deutschen and yet everyone knows what I'm talking about.

[@danieldeutschen]

That's true. Might just be that I'm german ;)

[@francescotirabassi7372]

Bellissimi video motonosity..seguo sia te che Chase..fate video davvero divertenti e utili👍

[@mattm1841]

The bike looks and sounds amazing!

[@MotoMikeYT]

Dude that exhaust sounds amazing! 👍👍 Great choice lol

[@evanhal420]

Damn i couldn't have slept until I finished putting on the exhaust

[@kevintoekimin]

Should you also install a power commander when you install a full exhaust?

[@plasticacaria6427]

YOU KEPT THE DB KILLER

[@silentj3419]

Does that have a DB killer installed?

[@nWsquidasaur]

Silent J yes

[@sslingzy]

Yes

[@shaun8309]

that sounds freaking sweet man!

[@texasrider4D5]

Ahhh! My notifs are so slow!! Lol better late than never i guess.. I'm wondering if it was ever started up with just the headers on.. 🔥😛🔥good stuff brosef! 👌🏍

[@karlfritz47]

I love your vids man..id love to be a bike mechanic..its somthing id love and could get so deep into..no Harleys or buells ..or triumph allowed. . . if only i was ten years younger

[@ilanSniping]

no remapping of the injection ? usually when you change the full echaust you need a remapping of the injection

[@motonosity]

+Black Wolf SM as I said I'm the video, I'm getting the ECU flashed

[@ilanSniping]

oh okay i didn't hear it , nice

[@mickeymang6]

Very nice man. But you might want to look into the PAIR system delete plates. Installs on the valve cover.

[@mickeymang6]

www.gravesport.com/products/graves-motorsports-smog-block-off-plates-for-yamaha-sportbikes.html

[@motonosity]

+Mike M yep will be doing fill AIS removal soon!

[@Dirthead_]

Ride the 450 again

[@beneagles007]

That thing looks so good. Soooooooo GOOD!!!!!!

[@dakotanewark353]

I’ve never done this before I’m buying the header an slip on kit so what all do I exactly need? to do this right.. so I don’t need the o2 sensor

[@daredevilike378]

Looks great and sounds allot better!

[@_wilfredomedina_]

Huge and important question. The O2 sensor. Take it off or leave it? Even with an ECU flash does it matter?

[@motonosity]

+Wilfredo Medina Take it off unless you plan on doing a Dyno tune.

[@arbikash669]

Bro u r really working very hard...

[@nicklavigne3052]

That Wisconsin shirt looks fire🔥🔥🔥

[@anderzenn_official]

Does it count as notification squad if I was refreshing your uploads waiting for it to show up?

[@motonosity]

+Danish Motovlogger I'll allow it

[@anderzenn_official]

[@big181818T]

That looks better than I throught it would and it sounds awesome

[@chrisp.5272]

I love the R6. Gotta get one.

[@micah7125]

what about tuning the carb? am i missing something? dont you need to change jets and re tune?

[@thony_777]

Oooooo my god I just wanna rob the bike from you, loving that new exhaust

[@97Drake]

You have to take the R6 to SCMM! That'll be turning heads especially with the new exhaust!!

[@jessaphillips2846]

you forgot that stock exhausts are also very heavy compared to aftermarket especially going with a cf canister

[@jessaphillips2846]

i guess you mentioned weight later in the video but you didn't mention it as to why you were swapping it out early in the video

[@1Yosuave]

Motonosity!! You gotta do a daily 100 with that new exhaust😁 after it gets tuned of coarse.

[@vannalldredge872]

I removed the servo on my 08 and lost a tone of low end torque. I'd prefer to keep that but loose the cats and a slip on would be nice.

[@29394D97]

If anybody is wondering, the R6 runs perfect without the O2 sensor. It runs richer which levels out the lean spots from the factory.

[@justincrayton324]

But is it okay to run with a O2 sensor plug with a full system exhaust (without a flash) or do I need to pull the sensor back in???

[@JamieS1992]

sounds like you need to put in a smog block off plate to remove the popping and crackling

[@motonosity]

+Yamaha Rider J that has to due with the a/f ratio now that the exhaust flows better. Smog block off plates are for if the AIS is removed.

[@JamieS1992]

yeah I removed my AIS was pumping to much air into the exhaust

[@maxm2637]

Nice Wisconsin shirt haha! Bike sounds great!

[@amigoamigo6171]

Can you tell me how to know what exhust pipe i have it on my bike ?? I just bought the bike 2 days ago and i dont know what exhust pipe do i have. And its too loud and iam trying to change the slip on exhust. Iam looking at LeoVince dB Killer For Factory R Muffler but i dont know its fit on my bike or not any help please ?? I have 2005 yzfr6 yamaha.

[@Blottski]

Thank god it's not a Two Brothers. Excellent choice

[@unused4606]

Im in for a treat

[@juliansaiz5714]

This is gonna be my first starter bike, great idea? I think yes

[@romandashkevich9780]

I got a 2007 r6s as my first streetbike. Keep in mind I rode 14 other motorcycles before (fourwheelers, dirtbikes, 2 street bikes 250 and a 600)

[@erikna8258]

can you do a genuine rough house scooter build

[@mikemedeiros5458]

Anyone else think that heat shield looking silver fairing should be painted black? Would look so much better. Did you have the db killer in the whole time?

[@lenardgor]

Why would you u get rid of the o2 sensor its quite important considering it gives the engine information about how good the engine is burning the fuel.

[@tvang768]

Do you prefer the LeoVince Factory S Exhaust System or M4 Titanium Full Exhaust X96 Carbon Canister for 2018 Yamaha r6?

[@DutchDayzGamerz]

I have two of the 2 stroke pipes they are awsome and hand made !

[@jaakloppi1846]

Is that a db killer in the muffler it looks like that

[@andresmartinez3689]

Why u put off the O2 sensor??? I think it runs better with it.