LESS AIR/ LESS OVERSPRAY when painting your car!

[@cjcarpenter8366]

I've learned so much from this channel its unbelievable. Seriously, keep doing what you're doing. You are helping a ton of people with this content.

[@GarageNoise]

Thanks, will do! Appreciate the comment!

[@kyrptotech]

This video is seriously helpful! Since I spray in an open garage, this is gonna be perfect for me. I'm pumped to give it a try. 👍

[@GarageNoise]

Awesome brother! Appreciate the supper and thanks for the TIP!

[@citytech7637]

i love this channel im learning so much im practicing with my own car colors i have a Tundra 040 super white and a Tahoe W8555 Ebony black thank you so much for all your videos hoping one day I can repair all the dings on my Tahoe hood

[@GarageNoise]

Awesome! Appreciate your comment!

[@Jerome3278]

😮 loved that mirror finish! 🔥💯💪🏽👌🏽

[@GarageNoise]

👊

[@joelkoonce8559]

Thanks again. Much appreciation. I do PDR and paint repair mobile for the Dealerships, low overspray is a must. 😊

[@GarageNoise]

Absolutely!

[@willsachs]

Always enjoy the videos, thanks Chris. I am loving the r500 and 610. When I spray clear without a suit now, I no longer become a human tack rag! Lol

[@GarageNoise]

🤣👍

[@speedokoterefinishnetwork4937]

Beyond amazing

[@GarageNoise]

Thanks brother!

[@speedokoterefinishnetwork4937]

I will tell you tho first hand.. U pol lays down decant for what it is but WILL delaminate in the years to come. You get about 3-5 years Max out of that clear in direct sunlight. However for budget repairs, cheaper clients or used car repairs its not bad. It's actually cheaper than speedokote smr130 on some sites

[@octanegarage3729]

Another great video. Thanks for the tip .

[@GarageNoise]

Thanks Bud! Love your content as well!

[@mickholgate3347]

Fantastic video as always Chris. Do you or could you do a video on tips and tricks when masking, especially door gaps. do you use DART or rolled edge masking tape for eg? I see some DART in this vid but would be good if you could go over it.

[@GarageNoise]

I do have a video on that. I will do more videos on that topic tho.

[@Jahrome3278]

Gotta love it 👌 🔥💯💪🏽

[@jujulo007]

Love your videos! They have helped me a lot! I use a wider4, a kiwami4, and a W-400, for primer, base, and clear respectively. My primer and base come out great using your settings but when I spray my clear, I get so much orange peel. Got any setting recommendations for the W-400? Thanks

[@GarageNoise]

A little more psi and less fluid should do the trick.

[@jamespolucha8790]

I’m just painting a motorcycle gas tank and rear fender will this work for this

[@GarageNoise]

Sure will

[@marlonelizalde7780]

Ayy looking clean! I just picked up this gun thanks for the recommendation, I was happy with my pro lite n tekna clear but really needed low cfm gun for garage projects. I was shocked on how much less overspray I had going 😂

[@GarageNoise]

Everytime I paint with this gun I'm amazed. Not because it's the best gun I've ever sprayed ,but the low air consumption and low overspray is unreal. It's hard for me to believe it can spray like that using less that 4 cfm's of air!

[@JohnWD40TC02]

Beautiful finish there Chris, black always shows the gloss off nicely but it also shows every single bit of dirt, lint or what ever else managed to get in the clear🤦‍♂ Some useful tips there on cutting the amount of overspray when painting👏🙏👍John UK

[@GarageNoise]

Thanks brother! Appreciate your comment and support!

[@normanbeagley6954]

Is there a time where a hvlp is better? I currently use a 1.3 astro hvlp for base and clear.

[@GarageNoise]

If it sprays good and you have the air. Nothing wrong with hvlp guns I have and use them. Hvlp guns are good for voc compliance, that's the whole reason they were developed.

[@ajmac996]

Hi great video thanks for the tips,you sprayed back to the edges would you not be afraid the colours wouldn't match

[@GarageNoise]

With this black I wasn't concerned with color match.

[@terryhall5811]

Will this setting work good with accu spray gun.

[@GarageNoise]

Check the TDS for the accuspray and use that as a guide it's been awhile since I've used mine. I imagine it's about 25 psi 2.5 turns out on fluid volume and fan to preference.

[@haule8418]

have you ever tried any of the upol 2:1 clears?

[@GarageNoise]

No I haven't, but would definitely like too.

[@nickolasgarantziotis7523]

Does this gun spray a better finish over the new black widow and the Drizzle dv1 just trying to decide on a good gun under 200.00 thanks

[@dennish9519]

Dust, when I started my project I was doing everything that I could to eliminate dust while spraying, After wet sanding and respraying and still getting dust I just figured that I would be cutting and buffing so now I still try my best to eliminate dust but with the thought that I would be cutting and buffing.

[@GarageNoise]

Yeah, even in a booth you get dust. If I only have to nib out some dust I'm ok but it a lot more work to remove peel. Appreciate your comment and support!

[@ranararon]

I have watched a lot of your videos and I learned a lot about painting. But I would like to know what would be the smallest air compressor I can use for painting with an LVLP gun.

[@GarageNoise]

So you want a compressor that produces the most cfm's you can afford. You need a compressor that produces at least 6cfms. Hope this helps appreciate the comment!

[@mikemikeyee]

For painting with the a610, what psi would you run it at using paint and not clear? Same mostly full fluid as well?

[@GarageNoise]

About 24psi

[@mikemikeyee]

Thanks!

[@4WheelBuilds]

Chris thanks for another great vid. On my paint job I was getting flakes of paint coming up from the masking foil around my paint area during spraying clear coat. The flakes were of the sealer and base I just sprayed. Do you know why that happens?

[@GarageNoise]

Were you using automotive masking plastic? If so it has a treated side of the plastic that should eliminate that

[@4WheelBuilds]

@@GarageNoise I believe I was, brand APP which had marked for automative painting use, but I did not notice a side being marked as 'this side up' or similar.

[@jjoop]

When painting base do u feel the lvlp gun goes thru alot of material using a r500 seems like 8 ounces goes fast

[@GarageNoise]

No, less base conventional paint guns use much more.

[@jjoop]

Ah ok just checking , keep up the good videos alot of good stuff here

[@GarageNoise]

@@jjoop Thanks brother! Appreciate the support!

[@impalaman4546]

Looking nice

[@GarageNoise]

Thanks brother!

[@factoryratgarage]

Great video

[@GarageNoise]

Thanks!

[@chops6474]

Awesome content Chris! I picked the Kiwami 4 up a couple months ago and will put it thru the trials in a couple weeks…Question though, I want to use the Kiwami for clear also, what recommended volume, fan and air do you recommend to start for CC? Thank you!!

[@GarageNoise]

28psi , start with 2.5 turns out from closed for fluid and a wide open fan

[@sheerwillsurvival2064]

Chris what do you recommend for get 2k can clear coat over spray off parts of car looks like a haze on panels. Used razor blade on windows but roof and side of doors not sure what to do 🤦🏼‍♂️

[@GarageNoise]

You can buff it, or isopropyl alchol if that doesn't work ruducer or mineral spirits

[@sheerwillsurvival2064]

@@GarageNoise oh thanks tried alcohol no change. I will try mineral spirits it’s hard stuff that 2k

[@GarageNoise]

@@sheerwillsurvival2064 if you wiping down the orig paint you can use thinner but not on plastics trim

[@sheerwillsurvival2064]

@@GarageNoise oh ok thanks yeah just the original paint it got on

[@jaysonrhee7452]

Pls help. This question in in regards to body work and block sanding a vehicle . I'm having difficulty getting my block sanding on every section of the car even/level throughout the entire car. Meaning this ... I block sand each section using guide coats and proper blocks, technique , etc. , But when I complete one section then move onto the next, I repeat and that section also comes out great , but then when I compare to the section I just did right next to this one, it's not even, level with each other. I'm not talking inches, not even centimeters, but I am a very detailed ocd prrson, and I'm talking milimetrrs.... Not necessarily enough difference to where a normal person would be able to tell, but enough of a variance where someone like me would be able to detect if looking extremely closely. Do u happen to have any advice or suggestions on how to remedy this or is this an unavoiadable thing

[@GarageNoise]

Sounds like it's minor but Hard for me to say. Some minor waves like that can be corrected in the primer and block sanding process. This may be the case.

[@craigcarter5276]

What do you think about the all weather clear at O'reillys

[@craigcarter5276]

Sorry I meant all weather reducer

[@GarageNoise]

I haven't found a real significant difference in reducers. I haven't tried that brand but I would say give it a shot.

[@davidsprings5136]

can u sand basecoat

[@GarageNoise]

Yes , lightly to remove imperfections. Then apply another coat of base before clear

[@unclebs4732]

WOW, that looks great! Glad I found your channel. Who is the better painter, you or Buddy?

[@GarageNoise]

Bud for sure! Who's this?

[@unclebs4732]

@@GarageNoise I knew your Dad and Mark D. told me about your channel. Keep up the good work.

[@royridge7792]

Kawmi 4. What kind of cup attachment are you using ? I’ve asked on a different video but NO reply. Can ya help a guy out sir please ?

[@GarageNoise]

I'll look an get back with you

[@Scottyham]

Chris, what is the typical time duration between your last coat of clear and the time you remove the masking tape and paper? Maybe you have covered this in one of your videos. Thanks for sharing your talents.

[@GarageNoise]

Typically in the summer 30-40 minutes. If I've got fine line down I pull that after about 20minutes. Appreciate your comment and support!

[@infamousflav]

Is that kerosene space heater actually running while you're spraying clear?

[@kushbythe2589]

Anyone use the r500 for a 4 to 1 to 2 primer with the 1.3 tip? If so how did it work?

[@GarageNoise]

Yes, I have and do and it works great!

[@kushbythe2589]

@@GarageNoise thanks so much, love your channel and keep up the amazing content!

[@jacobydavis3953]

What kind of hose do you have? Or is that a sleeve over the hose?

[@GarageNoise]

This is the one I use flexzilla amzn.to/3Nt4k8J

[@rossokeefe9268]

I use 10 psi with base when using this gun..20-22 for clear..

[@GarageNoise]

Awesome! That keeps overspray low

[@FnaAuto]

Would you recommend spraying a whole car with this? Or is it meant for blends?

[@GarageNoise]

You can absolutely use it to paint a complete car.

[@FnaAuto]

@@GarageNoise thank you for all the info. I’ll be getting this gun to do my first full paint job 👍

[@The9meister]

Less is more

[@GarageNoise]

👍