let's Build a Crazy Azalea Tree Farm

[@denisluzin6229]

This farm is really perfect. I've built it in survival on vanilla 1.17.1 server. Few comments for newbie minecrafters, who are going to build it in survival: 1. Load schematics in creative mode and clean (in litematica edit mode) it from azalea leaves and most of oak logs, just leave lowest layer of logs for reference and testing of block conveyors, this cleanup will make schematic MUCH easier to read and follow. 2. If you're going to use different building blocks (iron blocks instead of concrete) replace them during schematics cleanup. 3. TNT dupers. I've never seen such type of dupers, they're really cool. To assemble them put target block to the position of extended piston to prevent the block over TNT from powering. TNT will be put to budded state during the next activation cycle. 4. Carefully build central part of the farm where azalea trees will grow, do not forget to put and properly align hopper minecarts. 5. Shroomlights. If you have no nether tree farm gathering of 112 shroomlights may take a long time. Just replace them with glowstone (in the lower, unpowered layer) and jack-o-laterns in the top layer, that powers trapdoors. 6. Assemble and test bonemeal producing modules first, this will allow you to fill up chests, hoppers, droppers and dispencers of the central part of the farm with enought amount of bonemeal. 7. Assemble and test block conveyors and TNT dupers before finishing building of the central part.

[@ogofkop9849]

Thanks for the great advices. For the cleanup part, is there a faster way than manually? I've been wanting to download litematica for a while now but it's my first time actually using it. Edit: I found it! It's called schematicRebuildReplaceAll in the hotkeys.

[@Stofftasse]

reliable stone gen on an erratic feed rate: 7:30 you just need to dispense the lava after the water. And suck it in again.

[@bobdagranny7431]

His videos never disappoint and this one is no exception! Absolute genius. This man deserves at LEAST 100k subs!

[@bencixxd5122]

At least 1 million

[@danbaker8376]

@@bencixxd5122 10

[@muhammedalituncar]

He is 92k right now

[@Lexiont]

I absolutely love this kind of videos, it's so interesting seeing the process of the designing of a farm! It's very amazing

[@CheeseDud]

You have one of my favorite technical channels right now. Loving these designs and concepts

[@strebicux6174]

How does one of the smartest scicrafters only have 4.52k subs

[@harryrambo4564]

Actually, not a scicrafter anymore. He was too good for them anyway

[@enkvadrat_]

@@harryrambo4564 what??? Why is it so?

[@harryrambo4564]

@@enkvadrat_ Thats not for me to say, I'm sure cubic will share info if he wants to. Needless to say im sure he will move on to bigger and better things

[@enkvadrat_]

@@harryrambo4564 👌

[@The_TermiGator]

6.24k now

[@tanish6641]

This is relatively late, but I just built this. The slime block that moves the stairs next to your two moss blocks has a tendency to push any items that land on top of it. Sometimes, moss carpets or seeds can end up on top of it because of leaves breaking, and they can get launched into your blast chamber, ending up in the shulker loader and break it. There's probably a more elegant fix to this, but I just added a glass "blast shield" to stop the items, which is 7x5 vertically under the 5 columns of oak logs that are going to the blast chamber.

[@Eis_]

It may be slower, but the fact that (disregarding PC/Server specs) you can build an infinite number of this farm makes this really really good. Automatic as well.

[@commentaller4248]

Thats not a benefit tho cause you can also built 10 of floppys 12 gt 2x2 spruces and let bots plant the saplings

[@grapz2245]

Wonderfully done. I knew it would be possible to create a fully automatic tree farm with azalea trees, but I stopped doing the math once I realized that there would be no way to ensure the bone meal from the azalea trees would be enough to feed back into the system. It hadn't occurred to me to build ilmango's bone meal Moss farm to supplement that (as nether tree farms don't need anything like that). This is wonderfully compact and I'm probably going to build it in my SMP.

[@Jugbot]

I love how sometimes you just need to shove hopper minecarts into contraptions

[@Hyrum_Graff]

3600 logs/hour = 1800 chests/hour. 1 shulker farm produces 523 shells/hour, and so needs 262 chests/hour. 1800/262 = 6.8, so this farm should be able to supply 6 shulker farm modules and have some logs left over, yielding 1569 shulkerboxes/hour, or 26.15 boxes/minute.

[@cubicmetre]

That is some good maths there, if only we had the autocrafting table in the vanilla game then we could automatically smush them together into boxes.

[@Hyrum_Graff]

@@cubicmetre I use carpet, so that's what I'll be doing (with only one shulker module). Because MBE will break some things in my world that I'd rather not redesign, I have the challenge of designing crafting machines without using movable tile entities. I'm currently working on a factory to create every redstone component, with the end goal being a machine that automatically restocks by activating various farms in my survival world. It will need at least four players to run.

[@commentaller4248]

@@Hyrum_Graff 3600/8 =450

[@Hyrum_Graff]

@@commentaller4248 Yes, but how is it relevant?

[@wasdwasdwasdwasd]

@@cubicmetre lol, it happened.

[@Cera_01]

Dang, I was wondering the best way to filter the azaleas, never thought to use water.

[@gorillapod12]

Great video as usual, just amazing with what concepts and combinations you come up with, perfectly explained and easy to follow (most of the time lol). Keep going

[@NotEnoughAttention]

This channel has the best redstone and the best accent. Can't believe I haven't heard about this before

[@Phoenix-km6vp]

Probably one of my favourite minecraft players because most people only show their farm and tell how to use it and provide a schematic but this guy explains the whole process of how the farm works and all the difficulties faced while building this farm

[@mikl7557]

Once again cubicmetre you really make technical minecraft much more approachable, great video!

[@arbieenewman5473]

I found a problem of not being able to push moss into minecarts, however this can easily be avoided by using grass/dirt and turning it to moss once in place

[@mr_zmt7152]

Thanks for video! Didnt expect that these can be self sus.

[@slippybean900]

I think the weird cycle is due to how water flows. If I recall correctly, water flows every 4 ticks, and I think during its cooldown, it doesn't check for obstacles in its path, only when it spreads. This would mean that since your cycle is 5 ticks, every fourth trigger would have the water spreading the instant the piston is retracted, or something along those lines.

[@cubicmetre]

Water flows every 5 ticks and the BUD in theory takes 6 ticks to reset, however something weird happens with the block event scheduling and as a result it still responds to the water while it's resetting until after 4 cycles it stops. I'm still not quite sure what is happening.

[@PotatoSofi]

This farm fits all of my needs: 1- Not unnecessarily tall 2- As compact as possible while being self-sustaining 3- Efficient Time to stack a couple modules on top of each other and feed them into my furnace array

[@dtniland]

id love to say i understand it, but this is just wizardry to me. its still so amazing to see a master at work though, i love this content

[@indusriver963]

Thank you for this fantastic farm. I have built it in 1.17.1 survival using the schematic, and it is working great. I am getting 3700+ logs/hour, and there is about a 10 stack/hour bone meal deficit. Adding a few extra chests of bone meal (or adding an additional moss farm) is no problem, if I ever want to run it for a long time. It was fun getting 2no2name's setup budded correctly, but even with my low-level technical ability, I managed to do it. That mechanism is pure genius. The TNT dupers are also amazing, and by watching how Cubicmetre loaded the TNT on this video, I was able to construct them with no mishaps. Cubicmetre, do you have a video explaining these wonderful entity-less dupers? Now I have a pair of Il Mango's super fast moss farms in my spawn chunks, so if I ever want to divert the bone meal to another purpose, it is so easy. When I run this crazy Azalea farm, my base's MSPT goes from 9 to over 20, and my FPS go way down, but it's all good. I look forward to more great, educational videos from my new favorite technical minecrafter. Thank you Cubicmetre, and keep producing high quality videos.

[@cubicmetre]

I'm glad you enjoyed the video, the bonemeal deficit is not really an issue here as all that happens is the farm might choke on bonemeal every now and then and slow down slightly. The deficit results in only a 3.7% drop in efficiency for the farm in total which is negilgable.

[@indusriver963]

@@cubicmetre Thank you for your reply. That is good information to know. It is great how even if the bone meal supply is less than optimal, the farm continues working well. Also, those TNT dupers are extremely cool. I didn't know such things existed. Keep up the fantastic ideas and videos.

[@Will-eq7uh]

This set up seems ideal for a single player leaf farm

[@heffy3949]

the mad lad really went and did it...

[@drumstok]

Can you also design a dark oak tree farm, or a tree farm for all 2 by 2 trees that you can connect to your supper efficient blast chamber

[@dontletmememandie6506]

Or wait longer before clearing the stone.

[@hellothere6008]

He has one for spruce. A 72k/h tree farm. kzbin.info/www/bejne/maiUnq2cfbF7n6M

[@drumstok]

@@hellothere6008 but you cant connect that to the supper efficient blast chamber

[@mechanelize6797]

this is insanity

[@hinteregions]

Thank you for the tutorial on block updates :)

[@Christian.987]

i like your funny word magic man

[@aaronteng8814]

Hey, i am just getting into the technical aspects of minecraft and your vids really help. I was wondering what kind of tnt duper you were using as its different from the ones ive seen most other youtubers use.

[@cubicmetre]

It's an entityless duper that I designed specifically for my blast chambers, it features a safety override which removes power from the TnT allowing you to easily build and modify it without accidentally triggering the TnT. It's simple a lot easier to build and more compact than your regular slimestone dupers which use minecarts.

[@xxzekxx58]

@@cubicmetre How do you build it

[@iggypeters5564]

What a masterpiece

[@siRrk1337]

you could generate a lot of stone slowly in order to avoid cobble, then feed it in on demand

[@immortalkingff3083]

where is the nether side of the farm?????

[@SinJabonEnLaBoca1]

I would really like to see this on the obsidian platform with the new block breaking mechanic.

[@croonx1779]

I have build this farm in creative mode, test and found it work perfect, then I have build on vanilla server in survival mode, test and it work perfect, but after farm was running about 4 days I go to check and I found that moss block is everywhere around farm, also the central troughs was full of moss blocks close to outside edges of farm, there was thousands of moss blocks but troughs close to inside edges of farm was empty, also one of moss block which was response for grow azalea was converted to rooted dirt so farm get broken. It was nearly to break the server because of amount of items. I repair farm, run and double check, it was working perfect, no problems for converting moos block to bone meal, no problem for growing Azaleas and no problem for TNT chambers, all good. I leav farm running for next day and go check again and I found that the troughs was full of moss blocks close to outside edges of farm again, farm itself was working correct, it was no deficit of bone meal but there was thousands of an extra moos block in troughs. Why it happen, how to prevent this. It only happen if farm working offline on server because stressing farm in carpet mode for hundreds of hours doesn't reproduce that problem :[

[@cubicmetre]

This is due to the items falling into unloaded chunks and remaining there until the player returns, this is why I have the obsidian shields on the blast chambers, to prevent items from falling into unloaded chunks. I was not aware the moss farms would do this aswell.

[@croonx1779]

@@cubicmetre It never happen on "my eyes" but when I was offline.

[@cubicmetre]

@@croonx1779 Yeah, it happens because while the farm is chunkloading itself, there is a region around the farm where the chunks become non-entity processing meaning any items which fall into these chunks will get stuck and remain there until the player returns and loads the whole area. To fix the issue simply disable the parts of the moss farm near the edges and prevent items from going outside the entity processing chunks.

[@croonx1779]

@@cubicmetre I did. I removed redston behind last 3 pistons (close to the outside edge) in each of 3 lines of redstone in each of 4 lines of pistons and no more problem. Farm still working surprising even better.

[@croonx1779]

@@cubicmetre Now farm working so stable. Thank You very much cubicmetre.

[@Kallyn]

Should have built this before 2no2names design, I messed something up after like 6 hours of work and it's all broken

[@SRAZKVT]

what if you were to like, harvest more logs from the farm ? should crank up log rates without affecting bonemeal at all, here you get between 2 and 5 logs per tree, but azalea can grow a fair amount more than that

[@cubicmetre]

More log pushers requiring a special sequence to handle the orientation of the branches, double or even triple extenders and such. All of these components would increase the lag and complexity of the farm. At that point you may aswell build a universal tree farm which has so many more advantages for the same level of complexity over an azalea only farm.

[@sgtjet1723]

@@cubicmetre How you place block like that in 2:20?

[@tahmidhossain5838]

@@sgtjet1723 Tweakeroo mod

[@svendaman925]

@@sgtjet1723 you could also just shift against the repeater in vanilla

[@defeatSpace]

-Quasi switch,- better known as the Bud switch.

[@justindavid2996]

Built this farm in my world, and it works great. However, some moss carpet and seeds seem to make their way to the storage above, making the shulker loader not fill up purely with logs and clogging it.

[@cubicmetre]

The loader allows for mixed item compatibility, so if it fills up too much it will eventually just eject the box and replace it with a new one. Alternatively you could add an item filter for logs if you don't want rubbish in any of the boxes.

[@justindavid2996]

@@cubicmetre yeh I did just put a log filter above. Didn't notice the mixed item compatibility feature, though maybe I just haven't run it for some time. Great farm btw!

[@Daniel.W.R.Rehman]

This tree farm is amazing! I built it up according to the schematic on a spigot server, and it is producing logs well. Although one problem- one of the moss block cores isn't working. It looks like the piston which cleans above the moss is always in the way of finding an azalea plant, or punches it out when it does find it... Like its out of phase with the bone-mealing or something. Any ideas what could be happening? Has this design been tested on Spigot/Paper/Purpur servers? Thanks so much for the help, I absolutely adore this farm design, and the genius tech that went into it.

[@rileybates8406]

I found a solution that worked for me. its kinda hard to explain in a comment but ill try. "Main line" - redstone line from on switch to each core 1. there is a redstone repeater running from the main line to the non-working core, set to 2delay (was 1) 2. on the non working core, find the note block at the end of the main line, add an observer for delay. (there is already 1) 3. on the working core, add a repeater on 1 delay to the main line, after the note block, but before the piston/dispenser circuit 4. on the non-working core, under the piston/dispenser circuit, there is a line which controls the clock for the lower moss block. add a repeater on 1 delay between the piston/dispenser circuit and the moss circuit. Should work from there

[@activepepoeke]

@@rileybates8406 do you have screenshots of the fix?

[@stresbalgaming4433]

@@rileybates8406 So I did the first 3 things you said but can’t quite find where to place the 4th repeater. Any tips

[@sreva1177]

@@rileybates8406 I didn't want to build the full thing so I built the simpler module shown at 8:00 and it worked perfectly fine in solo world, however on spigot server I have the same problem than Daniel. Do you by any chance have an idea of how to fix that one? Is it a similar fix to what you told?

[@sreva1177]

The other thing I realised is that the pistons that are supposed to remove the logs only are getting activated even when there's no log yet

[@lone_wolf_productions]

I think the 5-5-5-10 (total 25 ticks) piston update is connect to the water updates they measure 6-6-6-7 (total 25 ticks) with the stair trick creating a moment the pistons are still in motion resulting in skipping a beat if however you change the sticky piston into a regular you get a stable 10-10-10-10 on the entire system. slower but stable. also water updates at 5 ticks creating the unstable situation with the piston updates without the stair trick. so i think if the back system could be faster it will always be ready for the next update. i'll try tommorow to see if i can fiddle around with it.

[@cubicmetre]

The odd clock cycle doesn't really cause any issues, it's more of a nuance, a 10-10-10-10 cycle might be more elegant but it's also slower. And given the farm is slow to begin with we should take as much speed as we can get.

[@smugless191]

So many videos lately, how does this mad Aussie lad do it?

[@acheronexile]

Can't say I'm smart enough to have the right answer, but my massive egg shaped head might have seen that water thingy a few times in the past. I feel that when the game doesnt have enough time with a non air block in the space where the water will flow, it seems to flow back even faster and with disregard to random tick speed. Especially noticed it early on when messing with a bucket sorter. Perhaps its similar to how you might end up getting lava to spread in an area by spam clicking. Perhaps some form of scheduled update that fails to get removed and executes anyways. Those would be my best guesses. Edit: But your solution is, of course, lovely.

[@Paalui]

Cool farm i found a way to detect the tree in 4gts with minecarts being pushed on detector rails, but but think the setup for that would be way bigger than yours.

[@zendevve]

woah thats so cool

[@andre_601]

Love nothing more than youtube refusing to play the video for no apparent reason.

[@joniRain]

hello, how is the wagon put inside the azalea block without breaking it, thanks.

[@peppilipicalfungus1384]

@joniRain if you place a rail sloping into the moss block the cart will just roll into it, I think that's what you were asking

[@joniRain]

@@peppilipicalfungus1384 Thank you so much.

[@tanish6641]

@@peppilipicalfungus1384 I overthought it too much and zeroticked the carts into a dirt block lol, should've checked the comments first

[@rollinmarbles2908]

is it possible to replace the tnt dupers with ones that dont need coral when building it? i'm on a superflat world so coral fans are impossible to obtain

[@tijmenknuts7447]

Love the videos! I want to build this farm, but i already have a moss farm that can provide the bonemeal. Is there anything i should watch out for when removing the moss farm modules from your design? Or can i just remove the modules without the farm breaking?

[@skillim7744]

i have to say i would really like to know what you had setup for the rooted dirt might as well get all you can out of the farm if its an option

[@47GC]

Good as always

[@vltir]

4:54 I guess by now you found out the issue yourself, but anyway. The problem is your bud is 6gt reset and water is flowing every 5gt. So what happens is after the first trigger the reset piston triggers instantly. by the time of the 2nd trigger the reset piston is not fully retrectat, and so starts resetting 1 gt later than the trigger. With each trigger the reset becomes one more gt ofset. After 4 triggers the bud is so far of, that by the time the water flows the piston is not budded yet And that way the contraption stops. To solve this issue you would need to make your bud 5gt reset. This can be easily approached by making the reset piston zerotick. I Think this is the longest comment i ever wrote xD. I hope the explanation was kind of understandable.

[@velwadus]

Hey, i use ypur design with a böadt chaimber but lock the piston that surcjes for azalea and the dispenser that is bonemealing the plant. With that i was able to get the blocks into a block stream. Tysm for designing the core!

[@cubicmetre]

I did make a system which can produce a single stream of logs using the conventional timings of the farm if you would like that.

[@velwadus]

@@cubicmetre so you mean ypu want to send me a design for a single block steam? Would be cool. My dc is Velwy#0001

[@mr_pike4609]

@@cubicmetre Man I would love that. Been trying to come up with a way to convert this into a single stream but I guess I cant figure out sweeper pistons.

[@blockerinsky918]

Problem with this farm is the low chance of getting an azalea sapling. I developed a faster, more bonemeal efficient farm that produces 4.9k logs and 4.9k dirt per hour, outputting two block streams for good tnt efficiency and mud/clay conversion. Got a showcase with wdl on my channel

[@gnubeutel8395]

What are the bottom lava cauldrons for? I couldn't figure out what you're supposed to filter here.

[@dtniland]

the dislikes are from people with non fully automatic tree farms who are mad that yours is better

[@limseungho]

4:46 the water flows faster than the system after few cycles. if water should be flowed, it sets a timer and after the timer ends, it checks if the water still can be flowed or not. and if it can, it flows and if its not, it cancels the flow event. but blocking water before the timer ends doesnt remove the already running timer. it will just wait for timer and cancel the event when it ends. however, because it doesnt check if water can be flowed or not while timer is running, the water can be removed and placed again but it will still flows if its done before timer ends. (this can be simply proofed by doing this experiment. put lava on the ground and pick up the lava with bucket and wait few moments and put it back in the same position before the first placed lava's flow timer ends. it will flow faster than normal lava because the timer didn't reset) also, because the water flow time and system cycle time is different, The update detecting piston infront of moss block will eventually finish pulling while water timer is about to end, As a result, the water will flow before the BUD system reset, So the piston cant detect the flow and it will stop the cycle.

[@peppilipicalfungus1384]

Hi, how did you get the hopper minecart inside the moss block? I can't get them inside the same area, as pushing a moss block in any way just breaks the block.

[@peppilipicalfungus1384]

nvm I found a way if you place a rail sloping into the moss block the cart will just roll into it, if anyone else was stuck like me. It is a little harder to align though.

[@ffraissataaa8939]

You need to filter sticks in all four

[@jarmingho]

Ingenious

[@Zekrom1]

So I built and after a few modifications to the farm to get it to run properly i let it run for about 8 hours, in that time approximately 2-3hours in the moss farms had a meltdown and generated a bunch of cobble. One moss farm made so much it broke itself and the others waterlogged stairs are no longer water logged. So question is does anyone know how to prevent Cobble from generating? Or how the stairs are no longer water logged?

[@MrMohl1]

works great! only "problem" im having is that sometimes there are seeds/azalea/carpets in the wood shulkers, and is just dont know where they come from. Do you have any idea? Its only like 2-6 items per shulker, so extremely infrequent/random. I mean, the wood goes from the blast chamber straight across and up to the shulker loader, so there is hardly any space where those could fall into the water streams. If it was "only" azalea, i would have thought that some leaves reached far enough, or that they landed on the logs and transported fast enough before they despawn. But its actual seeds and moss carpet too, so either from the bonemeal generators or the center module itself, but then there is NO WAY the items "pop off" and make ALL the way to the blast chamber/collection pool, right? I even added some extra glass over the water stream so they dont glitch over the cornerblocks into the stream, but that didnt help either

[@cubicmetre]

This farm is very chaotic and honestly not a very clean design. I was simply pushing the azalea tree farming mechanic too hard with the amount of knowledge I had at the time.

[@tanish6641]

Hey, this is 3 months late, but you should check out my comment on this vid for a fix. It was posted 7 months ago for reference.

[@nickderose]

any idea why one side will not grow a tree? i can physically place it and it will grow but when it gets placed by the dispenser it breaks

[@marcd2726]

I've been trying to get this farm to work, but one side won't ever fire. It just breaks the azalea before it becomes a tree. Any tips?

[@Noah-tq1du]

A year Later and i also need this anwser

[@benwybrow1197]

could you add a world downloaded to the description please

[@falxie_]

I really wanna know, what do your servers run because surely they're not vanilla

[@notapplicable7292]

that 5,5,5,10 cycle is really annoying. it's not to detract from this awesome farm but idk if I could deal with knowing I have that in my world.

[@glop7269]

It’s probably stupid but i want to change the tnt dupper with tnt dispencer but i don’t find the correct delay to blast the entier Wood… Do you know what it is or if the timing is more close ?

[@cubicmetre]

A TnT duper generates the TnT instantly, a dispenser has an intrinsic 4gt delay. This means in any case where you replace a duper with a dispenser all you need to do is remove 2 repeater ticks worth of delay.

[@glop7269]

@@cubicmetre thanks You very mutch for your help ! :)

[@avilss]

How to place blocos in this way? Apearing that BLUE marks

[@nightshade1807]

Insane you are at sub 20k

[@Dustgordo19]

yay my favorate tree!

[@zyrxnix]

how does the nether side of the chunk loader look?

[@Asdayasman]

Could this be adapted to farm the leaves for apples instead?

[@logost5786]

I don't understand how did you make automatic bone meal?

[@decell7085]

wjat clirnt you use for placing blocks like that and where i can found texturepack?

[@swaaaft]

its a java mod called tweakeroo

[@M_1024]

7:54 nooooo I want dirt...

[@cybr774]

What's the mod where it shows you sides where to place blocks?

[@jeppefiig5578]

How do you get the minecart aligned and into the moss blocks. You cant push the moss into the minecart and it isnt explained in the video

[@LivingWildLive]

maybe use a stone block then convert it to moss after u push the stone block into the minecart?

[@RuruSensei]

weird. is it normal that the pistons pushes the azalea tree?

[@asjkjakjskjkjakjskj]

het you didnt show how do i connect the dispensors and the redstone circuit

[@theparityalg6836]

What was that mod that allowed you to place blocks diagonally?

[@joasspeksnijder]

tweakeroo if you still need it

[@j0on927]

If i build it in spawn cunks i dont need the cunk lader rigth??

[@Hope_Len]

Can I use obsidian instead of the crying obsidian?

[@cubicmetre]

of course you can

[@Hope_Len]

@@cubicmetre thank you!!

[@imanolcigandafernandez6214]

How do you run Tweakeroo and Optifine together? Also, very nice video

[@WellImWinter]

Optifabric

[@mikhailivanov4]

There is a fabric mod specifically for optifine capes. Tweakaroo has zoom, and Sodium+Lithium+Phosphor have all the performance improvements of optifine and more.

[@imanolcigandafernandez6214]

@@WellImWinter The thing is that OptiFabric is not available for 1.17

[@samaurel6619]

@@imanolcigandafernandez6214 Not the full version, but the dev version is available and working.

[@tiuraz2006]

Hello! This is perfeect. I built it on a paper server and I have a problem. One side of farm is working perfectly. But second side is not working. It is not growing trees, it just destroys the sapling. It is weird, because both sides are same. I checked it.

[@cubicmetre]

Paper affects the behaviour of the redstone wire preventing the two sides from syncing properly

[@Nate-en1ni]

@@cubicmetre any workarounds?

[@maffinpower]

how does this work with none dupping? i tried to replace the piston dupe with a dispenser but after a while there are too many treelogs and it just breaks ... what should be the tnt/log ratio when not duping i tried different tickspeeds of the pushing pistons ... but i am not able doing it correctly v.v help please

[@cubicmetre]

A TnT duper produces the ignited TnT instantly whilst a dispenser has a 4gt delay, so you will need to reduce the delay powering the dispenser by 4gt.

[@maffinpower]

@@cubicmetre Thanks for the answer, since your design near the tnt is so compact. i just lengthend the signal that pushes the wood by 4 gt... but its not working ?! i dont see why

[@dontletmememandie6506]

How about an autosufficient azalea tree farm now? Recycle the moss and stuff to get the bonemeal without any additional farm. I tried it and it was suuuuuper slow. I’d like to see better people build one tho.

[@cubicmetre]

Yes, every method I could imagine for making the azalea tree farm self sufficient involves slowing it down and making the growth chamber much larger. For this farm I sacrificed the self sufficiency for the fastest possible cycle time. It's all about finding the best compromise to achieve the desired goal.

[@Mechanical_coding]

Is it possible to make one of these that doesnt eat 18k bonemeal/h?

[@deadrosas]

The farm is self sustaining. Meaning you don't need extra bonemeal

[@TheBoopidoop]

ohhhhhhh, CU Next Time

[@steveplaceholder6522]

Charcoal farm

[@deathreaper1170]

anyone have a working world download? I can't tell why this isn't running right.

[@brandonw5415]

does cubic metre have a discord?

[@xxzekxx58]

how do you build it without the tnt going off

[@cubicmetre]

Place the tnt last

[@emmm-v9q]

@@cubicmetrelmao😂

[@DidaMinecraft]

You can water log the pistons and seal them up with glass other than in front of the piston, gets stone nearly every time, once in a while the lava falls faster but never any cobble

[@emilhansen6281]

Hi is the farm outdated?

[@soliton4]

you dont explain why you need to detect the azalea plant in the first place. you can instead just permanently bonemeal the block above the moos. bonemal will only get dispensed when there is an azalea plant present. so i dont get why you went though all this effort

[@cubicmetre]

This method of detection is much faster and there are plants which grow on moss which accept bonemeal such as grass.

[@soliton4]

@@cubicmetre i do get why you are concerned with wasting bonemeal. but i dont see how it would be faster. when you connect the dispenser to a loop comparitor clock it will grow the tree immediately

[@cubicmetre]

@@soliton4 There are a few other details which make this method more streamlined, it takes much longer to remove a tree from the growth chamber than it does to directly detect the azalea plant. For example if you just bonemeal the moss block, bonemeal whatever gorws then assume a tree grew and activate the log removal system. The farm is a lot slower than if you can directly detect the azalea plant and ONLY acivate the log removal if a tree has grown. This system has the benefit of not only detecting the plant and bonemealing it. When the tree grows it will immediately detect it and remove the tree using the same mechanism.

[@savzarororororororora]

Bruh I’m trying to just make the simple module and this is garbage to try to follow

[@cubicmetre]

Yeah this is not much of a tutorial but in fact more of a showcase of the design process and tackling technical challenges. I find tutorials simply not very rewarding for myself or the viewer as you don't really learn anything. My goal is to be able to teach the fundamentals of engineering and problem solving in minecraft instead of just aimlessly placing blocks.

[@savzarororororororora]

@@cubicmetre I couldn’t figure out how to pulse the dispensers at the correct timing because I wasn’t sure what the exact redstone was, it’s very hard to try to recreate these types of farms on multiplayer paper servers, so figuring out how and why something works is a huge part, just saying add the master bonemeal block and hook it up isn’t very helpful imo

[@arnepoppenhaeger8156]

could you do an real schematic file pls thx

[@sgtjet1723]

How you place block like that in 2:20?

[@cubicmetre]

Tweakeroo flexible block placement

[@sgtjet1723]

@@cubicmetre thanks bro😌

[@wisampah8954]

does anybody have a world download?

[@cesarlugo2765]

Quick question? Does this work for people on bedrock?

[@enkvadrat_]

Not a chans

[@cesarlugo2765]

@@enkvadrat_ eh stuff like this on JAVA is cool to look at though