Let’s Talk about Compression Drivers V2

[@djkeys415s]

Yea jerry im runnin 10 8eights 2horns and6 tweets total and the crowed love it

[@cristovalmontoya5222]

It’s crazy how pro audio has became so popular last 5 to 10 years when before you were doing it with amped components sets over coaxial. It’s funny so see the mainstream companies starting to sell more pro audio even kicker started. I’m still running deaf bonce apocolyse on my mids and highs I want to go all prv audio and try compression drivers sometime the Brazilians have that down packed.

[@cmexeqtu21]

Dang it man, I've been in and out of car stereo my whole life since the 80's. I even been an installer for a few years and I still keep learning from you brother. Man it would be awesome to sit down with you and have a beer! Lol

[@zackbalins658]

Never took the time to learn about horns/compression drivers. You explained it pretty well sir and I'm a little bit more knowledgeable about them now. I will probably never run them though, due to size. Maybe if I had a crazy build....maybe.

[@JerryAintloud]

they do take up a lot of room

[@HNiCDuke]

I got one sitting in my cup holder 😂 only place I could think of putting it

[@Johnathanturner-l6w]

I love the O gauge door handle

[@jeffersondelira2706]

Sponsored by Starbucks

[@paulwilliamson489]

Just made my mind up on them. Thank u

[@JerryAintloud]

you'll like them

[@paulwilliamson489]

@@JerryAintloud I might need to reach out when I wire but I'm going for it thank u brother

[@lee28.78]

PRV !!! The way to go !!!

[@JerryAintloud]

from research i've done lots of brands are coming from same china build house. same exact product with different logos.

[@brittanyncharles20]

Good vids as always bro and watched commercials 💪

[@MrTwone79]

When I bought my ds18 the compression driver and the horn came together

[@Pittsburgh-412]

I wonder how compression drivers would sound if placed in the back by the subs but facing forward

[@GJGAMING5]

Same🤔

[@1992CapriceCapricemintconditio]

What's the name of the horns how much are they and where can I get them from

[@jeremymckim6838]

Was just eyeballing some ds18 compression drivers. The problem is fitting them in the doors of this . ranger. Just ordered the front templates I’m going to use to make dual 6.5 stack fab panel for my doors.

[@garypoole5841]

I haven't used compression drivers before,but I've heard a few cars with them in it. Not sure I got the room to make'em fit.

[@bigkato3134]

I run hybrid midrange they have the horn or super tweeter built in together I'm running 10 6.5 hybrids great when you don't have the space

[@chrisdep11]

Correct me if I'm wrong, but the D4S DS-80 180w rms midrange speakers are playable from 100hz to 10k. Wouldn't it just be more practical to run the Midrange and tweets instead of 3 types with midbass then horns then tweets? Jw

[@JerryAintloud]

not really, a mid shouldn't try to play tweeter frequency, just because they can play that high doesn't mean they'll do it good. i used to think, i'll never need a horn but after I had it, i'll never go back

[@chrisdep11]

@@JerryAintloud good point, hopefully my door pods I'm working on now sound good. I'm doing the mids I mentioned above with 2 DS 18 high compression tweets. No DSP though so crossover will have be at the amplifier. If it doesn't go well I'll just have to rebuild I suppose lol

[@ΑντώνηςΜαγκανιάρης-η9ζ]

​@@chrisdep11 can you answer my question man? you have connected the midrange directly to the amplifier using the HighPass of the amplifier and you have connected the tweeter with a filter capacitor, correct?

[@loganmilam4065]

what about crescendo un1s?

[@mikemccabe7124]

I have orion xtr pro 950's horns and they're 4ohms and I use 2 on my system in my 94 dakota I have 2 sets of 6.5" component sets on all 4 corners and I run the horns along side of 2 out of 4 of my xtr pro 8" mbmf all in the console and 3-12" xtr pro 12" for subs also use dsp and man I'm beyond impressed I agree the horns are definitely something that gives u that missing link in between the mids and silk dome tweets I also use a dsp and everyone that hears my system all say the same thing, "they all want to have a system that plays so clean & loud" any ways couldn't agree more with ya

[@gorgonismztruth1551]

horn loading is to increase dispassion and or throw of a driver

[@prototype9000]

ive seen a compression driver so powerful built in the 50s that destroyed just about anything put in front of it

[@djkeys415s]

@@prototype9000 yea I have old school Peavy stadium 90x90 just got to screw on a driver

[@gorgonismztruth1551]

I have 4 compression mids but I kn oil how to use them lol

[@jimmyjam5588]

Hmmm good thought

[@ΑντώνηςΜαγκανιάρης-η9ζ]

Good evening friend, I have in my car two 8" midrange 200w each with a tweeter in each door, I have connected them directly to the amplifier, the speakers using highpass and the tweeter simply with the capacitor that it provides as a filter? They would not like the speakers some filter to cut the highs from 6Khz and above for example?

[@tommylortz411]

Can you run just the compression driver without the front flare?

[@ogairbender808]

You won't have a way to mount it,ds18 has some 8 inch,mids that the compression driver can screw into from the back and plays through the coil hole,thus a way to mount it

[@JerryAintloud]

no the horn is an important part of a compression driver

[@GJGAMING5]

If not using a dsp do you need to run a crossover for the horns? 🤔🤔🤔

[@JerryAintloud]

yup, but some come with a capacitor for the + wire to block out lower frequencies

[@GJGAMING5]

@@JerryAintloud oh nice, is there a way to calculate which capacitor to use if they don’t already come with one?

[@robfishingkingdavis5653]

Lets go OG chat time💯

[@850CANE]

Hey Jerry! Are those AAB amps good? I've been looking at the 4900.1. Thanks

[@JerryAintloud]

no clue on the sub amps but i've done well with the 4 channels

[@lee28.78]

Not realy..they burnout easy on subs,,especially the 8k one ,,stay away from that one !!!!,.

[@850CANE]

@@JerryAintloud thanks bro

[@850CANE]

@@lee28.78 thanks bro. I have a smart 3 bass currently. Might just go to a 5k. I'd love to go Korean but not really in my budget. Although I can get an orion xtr 3500. But they don't have a fan and that concerns me.

[@gorgonismztruth1551]

a horn is just a flar shaped dispersion device added to a driver! you can horn load any speaker

[@rsxbase9291]

What is a stunt car ? Jerry

[@justinatmidi]

Phenolic Jerry......Phenolic!!!😂😂

[@JerryAintloud]

man i'm kinda hood, don't know all those big words

[@justinatmidi]

@@JerryAintloud 😂😂😂

[@terrainwitha6th522]

Them doors did sound good at ruckus💪

[@puresesh7985]

shame its another case of not knowing what hes on about

[@JerryAintloud]

thank you

[@elproco24]

People keep telling me to get horns but deaf bonce neo 6.5s are crushing the vocals in my system. I've got 2 d4s 8s , 2 neo 6.5 and 4 deaf bonce neo tweets omg just ridiculous SQ

[@rockybundrick2297]

Hey Jerry quick question 6 sundown x15 sixth order b pillar rear tuned to 23 front tuned to 46 good tunning for rusticle edits I like to play the Lows too

[@JerryAintloud]

should do very good with his edits

[@ametuerbasshead5163]

I need to learn how to actually use a dsp properly is the real problem for me.

[@JerryAintloud]

kzbin.info/www/bejne/oXWYaJh9r61qeJI

[@z1berzerker]

Phenolic? Maybe Jerry I am just trying to guess 🤷 Buddy it's Fen-o-lic I believe. I have Chuchero half boxes 10 mid 65hz-3k and 1 inch comp driver 1.8k-20k both are Audio Legion 👍😎

[@JerryAintloud]

i knew I was saying it wrong.

[@z1berzerker]

@@JerryAintloud All good 👍 Jerry I enjoy your videos immensely Thank you for getting in front of the camera 📷 and putting out great content 👍 continuously

[@iChubbs_81]

Neodymium* Say it with me Neo dym mium Lol You and JP say neodynium 😅

[@JerryAintloud]

[@bassheadlife492]

Damn I been saying it wrong the whole time too

[@lightningwaves5436]

I love horns.

[@justinatmidi]

Didn't know there was so much hate for stuntwalls😂😂

[@zackbalins658]

I don't really care for them either...I guess they look pretty neat sometimes 🤷‍♂️

[@justinatmidi]

@@zackbalins658 not caring for something and hating it are 2 very different views tho😂

[@JerryAintloud]

@@justinatmidi i wish shows had a section for them.. they are neat but not parked in front of me..

[@justinatmidi]

@@JerryAintloud that's true

[@brendangardner7639]

@Jerry Aintloud down here in Florida there are a few shows like that it definitely helps

[@jasondecluebass1012]

Them door look terrible

[@JerryAintloud]

thank's for the input.. built it all myself in my back yard..

[@uwuweewee]

Ohms are irrelevant, watts are irrelevant DSP is garbage