Lets Talk About 2MM Rotors | MTX Brake Pad Experience

Are 2mm rotors all hype or do they have a place on all bikes. Lets discuss and also I will share the details on MTX brake pads.

[@modepp5811]

Currently running the HS2 rotors with mtx pads. How would you compared the 2mm galfer rotor against the HS2?

[@Beiberhole69RVA]

Just came across your channel, nice vid! Are you running a 2mm thick rotor on Shimano brakes? I have SLX 4 pistons and was considering 2mm rotors to have a quicker bite point. I'm also considering the MTX pads as well.

[@RideEatWander]

I am running the 2mm. I am careful to center the rotors though as the openings for shimano seem narrower than others

[@PiazzaWoodWorks]

Great video mate! I am running Galfer 2mm rotors with xt 4 piston no issues. Also Magura mdrp worked but they started to come loose in the rivets. Wish I could easily get mtx here in australia to try

[@bjtj05]

How are you liking that setup. I coincidentally just ordered the same rotors for my Code RSC - I already had a Gold MTX rear and Red MTX front! Best pads out there.. Ordered a fresh set to go with the new Shark rotors.

[@RideEatWander]

I am really liking this combo. It’s been the best performing combo I have put together. The pad life of the MTX are surprisingly great as well

[@bjtj05]

@@RideEatWander I agree the MTX pad life is excellent considering the stopping power even on steep and wet PNW trails

[@Maykay1312]

Are the ceramic breaks pads good for e bikes ?

[@RideEatWander]

The Gold were specifically designed for E-bikes

[@LaurentiusTriarius]

These mtx pads get grooved easily by grit I found the cooma pink ceramic are much harder they don't groove that easily...