LG Front Load Washer LE Error Code Repair - Diagnosis Mode - Error Codes - Easy Fix!

Having a problem with your LG front load washer? No problem we are here to help, 1st part of the video will help you verify LE error code, 2nd part of video will show you how to fix your LG washer and last part of video we show you how to place LG washer into diagnosis mode to make sure LG washer LE error code is fixed. So let Online Appliance Tech help you with your LG le error washing machine issues. If have any questions or need help please feel free to leave in comments below.
Note....
When replacing Hall Sensor make sure you have the correct part number before replacing. First find the model number by opening the front door. It will be located where the door hits the frame of the washer. They will be small letters that will say MODEL with letters and numbers beside it.
🔎 Find Your Repair Parts Here🔎
✅Here's a link to Online Appliance Parts Hub for Rotor Position Sensor➡️ onlineapplianc...
Don't forget to like, comment and ask any questions on this video. Subscribe to our channel!
/ @onlineappliancetech

[@franklees10]

Worked, tjank you. LG wanted $400.00 just to come out and look at it.

[@onlineappliancetech]

Thank you for your kind words! I'm happy I could help you avoid that hefty fee.

[@EricTurner-hp1rs]

Hi, do they sell this hall sensor part at any stores? or special order

[@CCB09]

Thanks

[@onlineappliancetech]

Thank you for taking the time to comment! Your support means a lot to me!

[@oyinzeikechukwu7995]

The 20kg LG wash and dry front loader don't use sensor so what can do

[@gsd7065]

I have the exact same washer (WM3370hwa) that won't spin and gives the LE code. I have tried three new rotation sensors, the door lock, inspected the pump, tested wire harnesses for continuity and a few other tests as shown in the service manual. Still won't spin and gives the LE error. Board replacement next?

[@onlineappliancetech]

Did you check the motor for continuity?

[@gsd7065]

@@onlineappliancetech I checked the three terminals on the stator and all three combinations, 1-2, 2-3 and 3-1 had readings of 11.3 ohms, within the range of 5-15 ohms as shown in my SM. If there is a different test I am missing, I'd be keen to hear about it. Thanks.

[@onlineappliancetech]

@@gsd7065 did you check wiring harness from the main board to hall sensor? Sometimes they will be a cut wire, between MPC to hall sensor. I would check that before replacing MPC.. It is the 3 DC wires. Crazy over the last 250 washer with this LE code it's always be Hall Sensor.

[@Android_Warrior]

And if everything fails it's the motor control board. that happened to me.

[@odettekeyser2847]

Hi is there a way you can bypass the sensor?

[@onlineappliancetech]

sorry they are not🙃