Lian Li and Lamborghini?? Why?

[@torr136]

I think a collaboration with Boeing could be a good one. One of the side panels could randomly blow out, or the fan burst into flames.

[@Christian_Johansson]

gonna be great for airflow...

[@innocentbystander3317]

Flame effects > RGB effects May your clocks be high, and error rate low!

[@ramonbmovies]

Oh gosh...you got me cracking up! lol.

[@ramonbmovies]

@@Christian_Johansson lol

[@Nightdare]

Wouldn't be a good collab if it didn't crash from the desk for no reason

[@Hikari_to_Yuri]

If only the start button was like the car start jet fighter esque button. Missed opportunity

[@Mr.Morden]

Totally, the cars even have one of those protective covers where you have to flip the protector up to press the start button.

[@gaming_allowed]

in theory they could do it as car system is a 12v power system and the start button should work

[@karjis891]

My friend has a old soviet missile launch button as a power button😂

[@OhSoTiredMan]

@@karjis891 That is sick.

[@jameswbster]

Yes, this!

[@Uniclonus]

My guess on the 0000: all the ones sent out for promo purposes were all numbered 0000 so as to not mess with the limited numbering

[@muamercormehic4843]

yes Linus group got a 0000 too

[@LisaHarsh]

Just about to say that.

[@hafidzgi]

Companies do that with limited run

[@blackmennewstyle]

Someone give that human being her/his weight in Bitcoin....

[@Dr_De4th]

Yeah, LTT had also a 0000. 🤷‍♂️

[@Andrew-zi3tj]

That opening was golden

[@baileywitheford4899]

Agreed, lmao

[@punjabeeplaya]

Golden - li

[@MrZamboni66]

Liked it almost as much as how ridiculous he makes all of the Coolermaster Master stuff :D

[@blockbertus]

No, that is yellow. scnr

[@r0N1n_SD]

LMAO🙌

[@arthuralford]

You kind of got the story wrong. Ferrucio Lamborghini never worked for Ferrari, but he did get his start as a tractor manufacturer. He was also a customer of Ferrari, who was unhappy that the clutch kept going out. Ferrucio took it upon himself to find a solution to the clutch problem, and discovered that a clutch he used in his tractors not only fit, it was more reliable, and cost nearly the same. Thinking Enzo Ferrari, being an "engineer" and another businessman, would be open to some advice. Instead, as the story goes, Ferrari told Lamborghini to "stick to tractors," and Ferrucio went off to become Ferrari's biggest competitor. The case? $300 for a small screen you can't see if you put in an air cooler (as LTT did), a few carbon fiber pieces (easily faked), mirrored glass (plastic film would do the same), and a Lamborghini badge? Nope

[@OhSoTiredMan]

Wow, so Ferrari has always been a dick?

[@zonnodon163]

@@OhSoTiredMan Depends on ego size

[@Adrian-is6qn]

Someone watched the movie :P That damn drawing with the bull and the horse at the car show was epic xD

[@donatedflea]

Cool your not into Lamborghini lol. Some people are and for some it's worth the money. You sound a little jealous bud

[@empath69]

@@zonnodon163 ​ @OhSoTiredMan car companies founded on emotions: Ferrari was founded on pride; Lamborghini was founded on SPITE. :)

[@MrMartinSchou]

A really good case maker collaborating with LEGO might be awesome. It could be pretty much the ultimate in flexibility, unless it's just a boring "reskin" of existing cases. I'd want to see a fully LEGO case (though I'm not sure how to to a secure motherboard mount in LEGO), where as much of it as possible is made from standard LEGO bricks (in terms of types - colours could be specialized).

[@boam2943]

There are some LEGO parts that might be able to go through the screw holes (part 3957 comes to mind but might be too thick) but I do not know if it could handle the weight. Probably it would be best to complement that with parts holding the edges of the motherboard and modify the CPU cooler backplate to have longer screws that could go through something like a technic plate or a technic beam. I have done something similar with my RPi 3B and a USB connected 2,5'' HDD, although the weight is not comparable. The simplest alternative would be to have an actual desktop case (motherboard horizontally mounted) instead of a tower case (motherboard vertically mounted) but, being made of LEGO with a big span, probably wouldn't handle anything on top (like a monitor).

[@sonicmoth8340]

@@boam2943 additionally, the rigidity of the wall to which the mother board is mounted could use some creative building to be increased.

[@CarolusBuchwurm]

Just use Cada bricks not Lego and you have a winner. Cause Lego quality has fallen a lot.

[@donatedflea]

Why collab just make a case from Legos duhh

[@Whizzo260z]

My friend’s brother had a case made from Lego back in the days.

[@Adlevio]

6498 is the Lambos engine ccm³

[@rufiorepairs]

I think it would be cool to collaborate with a tool manufacturer like Snap on or Matco and build a case that looks like a toolbox. I think a lot of mechanic shops would be excited for that.

[@JustCarnivorousCupcake]

Oh damn a makita matx case with handles and all? Count me in

[@phenomanII]

Just the thought of In Win working with Snap-on to make a case is putting me in debt. In Win has made some really unique (and expensive) cases, and Snap-on toolboxes are up there as well...

[@ash36230]

They failed on the Lianborghinli name

[@fvdeddrift]

Dammit! I suggested Lian-Liamborghini on the Linus Short Circuit video! Lol! Yers is SO much better tho! And it needs to be 100% official for that case's name!

[@MuadDib-rx8ic]

Translucent mirrored glass and Carbon fiber panels by itself are nice touches and didn't need the Lambo name overhead IMO

[@BenEastburn]

Honestly either a Transformers or Star Trek case collaboration would be golden; Jay mentioned the Gundam ASUS collaboration and I can't believe no case companies thought to do a Hasbro Transformers collaboration I would pay any price!!!!!

[@senti2175]

10:17 I would love a flight SIM theme case with LCD panel that gives flight readings like altitude, speed, weather, GPS etc along with CPU GPU readings in another panel with some flight design aesthetics on case itself.

[@Olly_123_]

would be cool if they call it the "lambo li"

[@seanhall5385]

LianLamolini

[@fr00tloops77]

LianLini

[@wahahah]

LianBoGhini

[@Mr.Morden]

Lianboghini Dinamiche

[@reptilez13]

Lian Lambo sounds a little cleaner

[@ChristopherOrmond]

Star Trek Warp Core theme, the faster the PC runs the faster the blue LEDs accelerate around the case.

[@numa_kai]

lian li x lego. the case comes with a lego theme manual and you assemble it before putting components in. and some areas have random lego studs where you can attach lego pieces and minifigs or lian li x transformers. the case transforms and they have a magnetic or screwed in autobot or decepticon badges and color shift paint where on one angle its purple, on another its red XD

[@TheBarajas02]

LTT also got number 0000 haha

[@espartanofxfx8107]

noticed that too

[@bigzlowered]

@@espartanofxfx8107 pre-prod

[@danisoful]

Jupp, my guess is that they made some for reviewers and all are 0000

[@josiejuicewilder8911]

I'm assuming all the press samples have the same 0000 number and the ones for sale will all be numbered.

[@GEFZombiemango]

@@danisoful maybe that are the 2 missing from 6500

[@Doshi-lp4tn]

That diablo4 colab case with the health and resources rbg thing was incredible

[@simtheory7894]

How do you see the screen if the side glass is mirrored?

[@ClarkBark14]

It's translucent, like 50% reflective window film. Once the inside is lit up, I'm sure it's easy to see everything.

[@Shadow0fd3ath24]

for the same reason you can see inside and out of a tinted car

[@ciprianrobo]

Check the O11 PC Master Race edition, they did this before

[@drbluewolf]

​@ciprianrobo Have that case and love it! Fill it with enough lights and it looks crystal clear when you turn it on, and a giant mirror box when off.

[@innocentbystander3317]

It's maaaaaaagic! Or someone (I would say most) is smarter than you... You decide, just don't lose sleep over it. 🤣

[@thewiever9]

I can see the potential of this case to have this with a racing sim rig, last years it has become very popular simracing.

[@CraigLondon]

As tasteless as an Omega/Swatch collaboration. Mirrored glass...probably where this idea was dreamed up 😂

[@themattschulz3984]

That dashboard type display looks like it was designed for an early 1990ies kids tv show honestly

[@LapNgo-h9u]

I bet you could take that down to the wreck of the Titanic at least twice before it implodes.

[@polarbehr4968]

My pre-order has been in for a day already. Hurry up and ship them!

[@lukewalker1051]

I am an auto engineer FWIW and car guy like you Jay. I have built two Fractal cases with car theme. Nothing elaborate...minimalist...car emblems on front...Ferrari case is Ferrari red with black racing stripe. Other old R3 case is Z06 theme. I like them. My thoughts since you asked for feedback... This collab is ok. Many can afford it. I am a fan of Lian Li. I question the cheesy display which would be a disqualifier for me personally. I get they want to create an auto dash readout vibe. To me, the internal display is a waste but I do like the case. But for less money, one could forgo the cheesy display and just put a nice replica 3D Lambo hood badge on the front of Lian Li glass case and call it good. For those that want a carbon fiber motif, that's easy, can buy carbon fiber veneer in one's preferred weave and stick it on there. Cheers Jay.

[@earthtaurus5515]

Could have used the Lamborghini badge as a power button and activity LED.

[@OhSoTiredMan]

I agree, it's okay. Asus' collabs are amazing with their complete custom cases that fit the genre of their respected shows.

[@Athlonite69]

Definately some missed opportunities on this case especially for the price they want for it 1: Power button same as the Aventador start button 2: Placement of that LCD could have been better and used an internal USB connection 3: More Carbon fiber in the chassis less steel 4: Better badging of the case they could have moved that case count to the same place they put the Debauer badge 5: Made the side panel look like a really cool vented panel like it was actually off of an Aventador 6: Some really nice chrome plated RGB fans

[@YavuzTheIntern]

I saw this yesterday on a te h store site and it isnt worth 350. If there was something interesting that came with it, like a bull statue or whatever it would make sense. Also both ltt and you got the 0000 serial?

[@henryford6514]

Would love to see Boeing do something with a case company where the side panel keeps falling off and in the case is a TCAS screen and maybe some weather radar

[@southernpanda33]

A car themed after a green 1969 Chevrolet Camaro Z/28 with the 454 in it. There’s a PC I could live with.

[@bantcliff]

I'm assuming 0000 is press release versions as Adam on Short Circuit had 0000 as well?

[@jimdoe9827]

Blue and yellow are for Ultramarines, Green and yellow for Mantis Warriors, Red and Blue for Brazen Claws

[@GunSurgeon]

A full carbon fiber case would be pretty awesome.

[@quantumleaper]

How many kidneys do you to spend on the case?

[@GunSurgeon]

@@quantumleaper I’ve already given both my kidneys on my current build they will need to accept livers.

[@Jzwiz]

@@quantumleaperit wouldnt cost as much as you think since theyd only need flat sheets of it. It gets expensive when you do molding and intricate shapes that also need to be sturdy for vehicles etc

[@innocentbystander3317]

​@@quantumleaper Who cares? In this world, kidneys are easy to source. How many did you need? You want Chyneese/Weeghur, Ukelarian, or Irregal irrigant? I'll give you a discount...

[@quantumleaper]

@@innocentbystander3317 Good try ignorant one. I'd appreciate it if you could try better next time... A human Kidney goes for about 10K on the black market. If you want to put a dead kidney in someone that's up to you.

[@ShawnHinck]

Fun fact, the official color of Ferrari is so yellow, red is the color of Italy which is why their race teams are red. When Ferrari and Italy weren’t getting along they had their cars painted blue

[@ralphb8602]

Intro LOL 😂

[@KMantle]

I built a Be Quiet! system and I was gonna put a Rolls Royce Phantom in there, but the case wasn't big enough. Might upgrade to the 901 to make it happen. LOL.

[@phj420]

hoonigan case would be kick ass

[@IDv8I]

One of Ken's camo graphics on it...nice.

[@djnolook384]

would of been before they sold and Ken was alive

[@phj420]

@@djnolook384 the truth

[@sirmonkey1985]

hoonigan died with Ken sadly.

[@KoBe2KB]

I would like a collab with fractal design, that would be sick.

[@Satori-Automotive]

probably only costs 1299$ 7:40 and the screen layout is questionable :D. I mean there its barely visible. Why isnt the screen on top of the PC case or on the front panel? An additional case fan would be way more usefull in this place where it sits right now. edit: 5:35 ok thats somewhat reasonable but the screen layout is goofy

[@BeastMortThe]

Now imagine the glass put back on... now what exactly are you going to see? NOT MUCH! LoL

[@jonesgang]

For the 2-way mirror it is worth it. When off you only see reflection but when on you see everything inside. Jay you really need to use this case in a build. That would be sweet!

[@imaginify6173]

i wanna know how the conversation for this collab went 😭

[@tassadarforaiur]

God gundam themed case with an attic panel that lifts off to expose a radiator with embeded leds. *Might need kyoji's help

[@krjal3038]

They really missed a trick not calling it the Lianborghini... Li

[@ramonbmovies]

The mirror finish is actually quite nice.

[@khyron6]

Hum I can't afford 300,000$ car but I can afford a 300$ PC case. Then you can tell everyone you own a Lambo and its not a lie. ;)

[@stephensullivan527]

I want Star Wars cases like the custom one you made

[@lc7ka7]

Jay: “I’m a car guy”. Proceeds to not realize that 6498 is the displacement of the Lamborghini Aventador engine. 🤷‍♂️

[@coitcordery8501]

It's not as obvious for an American as we use cubic inches or liters. In the US, it's referred to an a 6.5l v12. Not a 6498cc v12.

[@RonJeremy514]

@@coitcordery8501 We use both liter and cc in Europe 🤦‍♂

[@coitcordery8501]

@@RonJeremy514 I'm well aware as they are metric units. I (an American) was responding from an American perspective. The channel in question is based in California (an American state). The point I was trying to make was that Cubic Centimeters are not commonly used in the American auto industry. The American auto industry has relied on the Cubic Inches standard. I am well aware that 6.5 liters is the same as 6500 Cubic Centimeters. What I am NOT aware of is why someone would consider a Lambo as a "Car Guy's Car". Car guys work on their own cars, not pay someone $2K(That's American dollars if you were unsure.) to change their oil. I hope I was a bit clearer for our friends across the pond as to not confuse you further.

[@johnhubbard1991]

i can see this flowing well with you forged carbon fiber water block with all satin black hard lines pearl yellow fittings and pearl yellow coolant in a satin res minimal witch leds to show case

[@blairz28]

ltt also got 0000 I think all of the review samples aren't serialized and the production copies are numbered.

[@dauntae24]

Just let Jay feel special next time.

[@zoranSoul]

i want a john deer theme hahahaha or a whirlpool theme with a porcelain parts XD

[@Zen_Tetsuken]

lianborghini

[@robins7357]

I don't know if that would necessarily need to be a collaboration, but a case where you could only buy the large flat surfaces in e.g. sheet metal, glass, wood, etc. and the connecting structures are downloadable as 3D printer files would be awesome. Kinda like Lazer3D does, but with the option to make the corner pieces yourself. Manufacturer could offer a set with panels only, panels and heat set inserts and screws, or full DIY kit with panels, screws and already printed parts with inserts already installed. It would need to be cheaper than buying a fully assembled case of the same size though to really take off, I guess. Should be possible, since manufacturer saves a lot of space and thus cost in shipping. Also better for the environment ;)

[@vpx23]

LianLi was once special because the cases were 100% made of aluminium (except some small plastic covers etc.). Now at the best the panels are made of aluminium and the frame is SPCC like every other case manufacturer. Also the homepage is ridiculously slow.

[@BeastMortThe]

Dude their site sucks. It's as bad as the ASUS site which is dogshit slow.

[@BorosTheGamer]

I wonder if Lamborghini would sue me if I modified the case 😂😂😂

[@lowonjam]

I would love a Tron-themed case! 😁

[@kingcrackedhen3572]

I want to see a JTC LTT GN case, where you’ve all somehow come to a consensus on what is the ultimate case design

[@DeltaKilo77]

That case is under whelming. I figured they'd give it a Lamborghini car shape of sorts or something. Nothing special about this case.

[@_mike]

2:20 - 0000 is press reserved, LTT got this number as well, and I believe several others too.

[@profezzorx9131]

Saw that case on Lian Li's IG page this morning, and I really wasn't all that impressed. Reminds me of a lot of brands that do minimal effort to make a special edition of an existing product, then charge a premium price for it... Like when Dodge was putting out different versions of the Challengers & Chargers, and the only thing differentiating them was exterior stickers and little dashboard plaques.

[@JayRoboFox]

id love to see an imsa collab, give the outside a livery of one the GTD, GTP, and LMP2 cars. have some really nice switches similar to the ones that would be in the car (one for power, fan control, rgb controls). maybe have the internal panted to look like a rollcage, tie it into the cable management. Also like this collab, have a screen that looks like gauge, but instead have the "speedo/tach" be the fan/pump speed, and have it mounted to the front of the case.

[@rainbryan]

This is going to go well with my Lamborghini X Secret Labs gaming chair!

[@boatridecharm]

This isn't the first gaming related Lambo collab - recently SecretLab did one for their Titan Evo and those sold out quickly from what I remember. There's definitely a demand for it. I'd love to see Cyberpunk themed cases. NerdForge made a custom built one when collaborating with LTT and it looked absolutely incredible.

[@outlet6989]

I understand there is an extra cost option coming. Four Lamborghini alloy case wheels. Price TBD.

[@J_Brian]

If I’m building a PC in this I’m tunning everything, adding bolt ons, a nice exhaust, & throwing on a super charger cooler.

[@z3r0char]

I also watched the ltt video on this case. They mentioned a few other case features: the Lamborghini yellow screws on the back and the rgb lighting on the exterior of the case in Lamborghini colors

[@NathanExplosion99]

An all-stainless SpaceX Starship collab.

[@tensazangbankai]

A Magaman or Magaman X case or a Star Wars case would look neat.

[@DubEuro]

Greddy case with big chrome pipes and blue rubber boots for the fittings with a thick chrome rad looking like an intercooler. They also have really nice swivel hose with QD fittings.

[@Nareimooncatt]

I'd love to see a Collab with X-Lights, which is one of the most popular light controller programs for things like compressed Christmas light displays. Imagine an RGB focused case where you can control every single LED to do anything you want. It would put all other RGB programmer to shame.

[@fasthdharley]

A collaboration between Jay and ‘the way of the wrench’ building a virtual pinball cabinet would be ace!

[@brandonunger1689]

Jay, not doing this case much justice, put it all together and see how beautiful it is

[@ArcticVXR1]

Also a car guy. And i was saying to myself "keep the dials on blue and yellow jay!!". And you did!! Legend.

[@billjackson5349]

Military theme would be cool and tons of directions you could go with that from ammo cans to aircraft to ships and then there are all the branches.

[@khaychi]

FOMO makes people buy all kinds of stuff they normally wouldn't. Not just for using it, also for collecting or resell reasons. So yeah, no problem these sell out. 😅

[@jamesbarlett246]

I am very satisfied with my white 011 evo xl. I bought a 7 inch Display and followed Jayztwocents sensor panel video and put the panel under my monitor.

[@xXfzmusicXx]

This is actually not identical to other O11D's. The O11D RGB changed a lot of things, in minor ways, but it destroyed a lot of the compatibility with their add on items. For example both the top mounted IO kit, and the extra bottom IO kits don't work with this. They did make a new bottom IO kit for the RGB, but still. Also my O11D EK distro block didn't work with the newer O11D RGB

[@nicholasbaldwin1674]

ThermalTake and BMW did this in 2009. Not the first time a computer case company and a car company collaborated on a case

[@brothernemiel6465]

A Games Workshop edition, the Space marine version would have a frame made of Adamantium and side panel made of Ceramite painted in your favorite chapter color, while a Custodes version would have Auramite panels...and the Ork version would be just kit bashed together from junk 'n bitz and painted in red to run fasta Clock Speedz!

[@Oumeic]

Jay is trying to come up with the perfect case design…I can see Jay’s case with a der’Bauer plaque on it. Can you guys imagine a case line designed by those two? Ultimate collaboration…and maybe even Steve at GN can input…I am sure I am not the first person to think of this. Hopefully the case would not come out looking like a Tesla truck, lol.

[@supermegarichkid2138]

Soooo... can you see the screen with the mirrored side panel on??????

[@the1truefluffy]

> gets all zeroes for a serial number > complains that he isn't number one I love you, Jay. Never change.

[@zander3115]

Hahahaha right after you peeled the thing and said "This is carbon fibre right here" I immediately said ooo cahbon fiba and then the exact clip started haha thank you for putting that in there

[@darklight5627]

A colaboration with a High-End Audio Brand would be nice. Let's say for example Yamaha. I'd love to have a Mid-Tower / Full-Tower case with some integrated audio hardware like a decent Amplifier and Display with some settings and Equalizer.

[@u9Nails]

I'd like to see a proper case collaboration with Bandai. Not just some chibi sticker, and viola! But a fully inspired piece of set art.

[@Uchia18]

To keep the automotive theme going take it a step further and make a case that looks like an engine bay, a cpu shroud that looks like an engine block and has full water cooling that takes care of the cpu, gpu, and the vrms on the mobo, a custom rad that looks like one out of a car. Carbon fiber trim on the case (can be fake).

[@thevoid6756]

you should have put the mirrored side panel on to check if the screen is even readable with the panel on.

[@hardlyworgen71]

This is not Lamborghini's first tech collaboration. Back in 2007 there was a Lamborghini laptop made by Asus.

[@CommodoreFan64]

Yep, & Ferrari had a collab with Acer, but if I remember correctly from the reviews of the time, neither the Asus Lamborghini, or the Acer Ferrari laptops were worth the premiums being charged for them, or what they go for on the use market these days.

[@hardlyworgen71]

@@CommodoreFan64 LazyGameReviews did a video on the Lambo laptop.

[@CommodoreFan64]

​@@hardlyworgen71 That he did, and I don't think he was all that impressed with it either. Also I should have mentioned Razr did another laptop collab with Lamborghini last year, & I think it reviewed better, but it's still overpriced for what it is.

[@eskieman3948]

What? No end of video FastFart? The horror....

[@sturm375]

Dream colab for a case: Don't care who makes the case as long as it's quality, but DC and specifically Superman. Would love to see an old school fortress of solitude with the giant yellow key as the on/of switch.

[@Springfield_7.62x63mm]

As a gun person I always wanted to see Be Quiet! making a collab version of their Dark Base cases with one of the German small arms manufacturers like Heckler & Koch. It'd be so cool and I'll definitely buy it to go with my planned all-AMD build lol.

[@sodapopinksi667]

I think you should just make a gun themed build lol. Joking, not joking

[@chunkuswumpus3515]

Would be cool to have peripheral themes like Corsair matching RGB in a whole thing with their keyboards and mice not dissimilar to how some of the cableless fans work as a whole system instead of individual fans. Maybe an apple x fractal collab since their design languages often cross over or the framework laptop mini PC case x displate so you can hide your laptop PC behind a poster and have the displate mounting stuffs

[@TheDutchTexanGames]

This brought back memories to the 2000s for me. They were selling an Acer Ferrari laptop at the time. I thought they looked pretty cool. Naturally they couldn't hold a candle to the desktop I was running for LAN parties... Man I miss those...

[@pju28]

Themes: X-Box, Retro like Nintendo, Commodore Amiga, Sega, Atari, Arcade, ….

[@brianhahne9623]

I’d like to see built in pump/reservoir solutions, for a water cooling theme. Like the floor of the case have a res, maybe the mb tray could be a big reservoir. With built in or just pre installed radiators and ship with choice of tubing and fittings.

[@johnhudson7055]

There have been a few Ferrari and Lamborghini laptops, I would have liked to see them work some yellow in there.

[@CommodoreFan64]

Yep they were from Asus, and Acer, but if I remember correctly from the reviews of the time, none of them of them were worth the inflated asking prices vs. nearly the same laptops without the logos all over them.

[@Peterstarzynskitech]

Now I need an asmr of Jay doing that flick thing, now that he has a car themed computer.

[@droopysloopy]

I am using your cpu-block. Putting it on the shelf would be like buying a Lamborghini and parking it in the garage, never driving it. Complete madness.

[@kagekiso]

6,498 is the engine displacement of the Aventador, I believe. and all the media preview units are 0000 to not mess with the limited run

[@Shadowshael]

I don't know if I personally care about the Lamborghini labeling, but the carbon fiber with yellow does look pretty sexy. A silver case with carbon fiber accents to play off their tractor look would be neat too. Dodge Viper orange accents would look sick also (or even the classic Blue with white stripes). I honestly just like other accent colors from sources that just aren't muhRGB.

[@CynicalDriver]

As a car guy and a gamer, I love products like this. It's rare to see those two worlds collide and I think it's awesome. That said, I'd be far more likely to buy something like this if they ditch the gimmicky sensor display and change the top "carbon fiber" piece to show ghosted silhouettes of iconic Lamborghini models. It would be classy and understated, but in a very "car scene" way. Honestly... If Aston Martin did a collab, I'd buy it.

[@davidbrooks9576]

I've only ever built other people's computers in lian li cases, however I've always been impressed by the quality and building experience.

[@chrisjarkovsky1655]

I think a Home Depot themed case. Like an orange and white with the logo on the front panel and tools on the side panel. Maybe a Milwaukee tool collab or as much as I hate Dewalt tools I think people will buy them.