Lidl Parkside 4 in 1 Petrol Multitool PBK 4 B3 Review Part 2, putting it together

[@gengl671]

Hey Ben, thank you for making these videos. I am a young guy that is trying to figure this all out and this is very helpful! God bless

[@BensWorkshop]

You are very welcome. Please like, share and if you like the channel, subscribe!

[@keithconneely4725]

Thank you for making these videos Ben - I'd be totally lost without them!

[@BensWorkshop]

You are very welcome. I am pleased they helped. Many thanks for watching, please like, share and subscribe!

[@paulcarroll1545]

I have one of these, found your videos today, much better for me to watch your videos than read that manual, I just wish I had 4 arms when putting it together !!! Thank you for the easy to follow videos.

[@BensWorkshop]

You are very welcome. I am pleased they helped. Many thanks for watching, please like, share and if you like the channel, subscribe!

[@elsdv3862]

many thanks from the Netherlands for the instruction video. We are not really technical and have no experience with these types of devices. We follow for new equipment very carefully the manual. But with this device we have been struggling for a day with the manual for the assembly of the scythe mower. We find out after your video that the manual is wrong. Fortunately with your explanation and showing how it sounds together, we have come out.

[@BensWorkshop]

You are very welcome. I also followed the instructions in the manual, the ones in English, however it is not so much the wording at fault as the drawings are unclear. I am pleased to have helped. Please like, share and if you like the channel, subscribe!

[@thomdejong462]

Video of it runnin would be great, bought it today. Thanks for the vid.

[@BensWorkshop]

Linked in the description is parts 1 and 3, 3 has it running. See below: kzbin.info/www/bejne/r6HKfnl_pN5sgrM Part 1 is the unboxing, here: kzbin.info/www/bejne/lYi8ioJmpdWIic0 and then there's a part about strimmer head issues: kzbin.info/www/bejne/aGKTk62Dr9eKmdk Many thanks for watching, please like, share and if you like the channel, subscribe!

[@thomdejong462]

@@BensWorkshop thanks! Didn't see that. Going to fiddle with it tonight. Here the product is sold in the Netherlands. Same kit.

[@BensWorkshop]

Enjoy!

[@thomdejong462]

@@BensWorkshop Do you also have 3 years warranty? At what rate do you mix your oil to benzine? 1 liter oil to 50 liters of benzine or 1 on 40?

[@BensWorkshop]

All Lidl tools have a 3 year warranty. The instructions say 40 to 1.

[@fabrizioviscardi40]

In Italy too Lidl as a very good products! Thanks for sharing! Cheers Fabrizio - like 7

[@BensWorkshop]

You will get the same in Italy, just at different times. Many thanks for watching!

[@fabrizioviscardi40]

@@BensWorkshop Yes my friend!

[@stephenlocker4326]

Thanks again I like the extra bits on maintenance looking forward to the next one

[@BensWorkshop]

You are very welcome! Will be filming in a minute. Many thanks for watching!

[@MrFactotum]

eyup Ben I must have let this video somehow slip through, Ben Any way nicely put together atb Kev

[@BensWorkshop]

No worries, they came thick and fast. Many thanks for watching!

[@AliMackMechanical]

Doesn't seem to be a bad tool good demonstration. 👍

[@BensWorkshop]

Many thanks Ali, and thanks for watching!

[@AlessandroAngotzi]

Any tip on how to fix the choke lever if the spring jumped off? Bought one last week and that's the first thing that happened!

[@BensWorkshop]

Odd. Short answer is not because it has not happened to mine. However you can just get it changed for a new one at Lidl. Many thanks for watching, please like, share and if you like the channel, subscribe!

[@turboconqueringmegaeagle9006]

Nice one Benedict.

[@BensWorkshop]

Cheers James and thanks for watching!

[@LordChlCha]

Thank you Sir, great video :)

[@undergroundbass946fm]

Thank you, very helpful indeed

[@BensWorkshop]

I am pleased it was helpful. Many thanks for watching, please like, share and if you like the channel, subscribe!

[@johnnystromberg]

Very useful... The manual isn't very clear on the assembly 😅 cheers

[@BensWorkshop]

You are very welcome! I am pleased my video was helpful. Many thanks for watching, please like, share and if you like the channel, subscribe!

[@kennypaul100]

Is it possible to reverse the harness so that it is left handed i.e. with the hook on the right side? I can't see an easy way to do it.

[@davidcrone7439]

Followed your instructions for brush cutter and seems to work. When I followed the instruction booklet and tighten the nut it jams the blade so it won't turn. Thanks

[@BensWorkshop]

Which nut and which blade? Also, you are welcome, many thanks for watching, please like, share and if you like the channel, subscribe!

[@davidcrone7439]

@@BensWorkshop The brush cutter blade, in the instruction booklet para 9.2.2 Nut 52 in booklet

[@BensWorkshop]

Many thanks, I will double check when I get home. I thought I was doing it according to the instructions! :)

[@BensWorkshop]

I read those instructions. They are what I followed, but are not desperately clear. I could see how you could put things on incorrectly from there. Also I don't think the line drawings are clear. The washer that always stays on (with the cut out to allow you to jam the mandrel) looks almost the same as the flange washer that goes on after the blade in the drawing. I think actual pictures would have been better, though an instructional video better still, though, of course, I made one.

[@pauly254]

Thank you

[@BensWorkshop]

You are welcome! Many thanks for watching! Please like, share and if you like the channel, subscribe!

[@eamonnmorris8190]

Hi, is the internal splin that spins inside square? Im looking for a replacement power head for a ryobi expand it range.

[@BensWorkshop]

The external spline goes in to a socket with an internal spline. If your shaft has a square socket it is not going to work. Many thanks for watching, please like, share and if you like the channel, subscribe!

[@LordChlCha]

Video is extremely informative, especially details likegrease point.

[@BensWorkshop]

You are very welcome. Many thanks for watching, please like, share and if you like the channel subscribe!

[@kevinlamb5041]

Very helpful! Good video

[@BensWorkshop]

You are welcome. Many thanks for watching, please like, share and if you like the channel, subscribe!

[@tithrepair-Makita-mikaza]

good job

[@BensWorkshop]

Many thanks, and thanks for watching!

[@jamestodd1876]

where can i get parts for 4 in 1 multitool , i need a primer bulb for the motor

[@BensWorkshop]

The manual should have a phone number for Lidl service in there, though if you can measure it you could also probably get a suitable primer bulb from Amazon. Many thanks for watching! Please like, share and if you like the channel, subscribe!

[@ad8666]

Any ideas where to get spare parts for it? Cheers

[@BensWorkshop]

There is a Lidl service number in the manual. What are you after? Similar strimmer heads are available on Amazon. Also, many thanks for watching, please like, share and if you like the channel, subscribe!

[@ad8666]

@BensWorkshop I'm looking for a strimmer head replacement as mine unfortunately broke. Thank you for your help!

[@BensWorkshop]

I also have a video on the strimmer head. However this one looks like a reasonable replacement. M10 x 1.25 left hand thread. www.amazon.co.uk/dp/B089NQBMNN/?coliid=IEYAQAEUZ3PIY&colid=5X5HSLDJMO93&psc=1&ref_=list_c_wl_lv_ov_lig_dp_it

[@ad8666]

@@BensWorkshop thank you!

[@BensWorkshop]

You are welcome. Let me know how you get on, and how you find that strimmer head.

[@3647Edd]

I am on my second one of these things as the kill switch stopped working after very little use. Contacted Lidl who refunded me as unable to replace like for like. Bought another one 2 months ago and guess what? After maybe a dozen switch offs the bloody kill switch has given up again! Only way to stop the thing is to disconnect the HT lead! So annoying. I’ll continue using it as it has a 3 year warranty. It’s either a design fault or a batch of faulty switches. 🤬😡🤬

[@BensWorkshop]

Never had a problem with mine. Has a connector come loose to the coil?

[@raymondstoner5555]

I have thought about getting one

[@BensWorkshop]

And I went and got on on Thursday morning! Looks good so far. You will see how it gets on shortly. Many thanks for watching!

[@raymondstoner5555]

@@BensWorkshop dad picked one up today

[@BensWorkshop]

@@raymondstoner5555 Well, he'll have fun with that.

[@raymondstoner5555]

@@BensWorkshop more like I will lol 😂

[@BensWorkshop]

@@raymondstoner5555 I wonder if you can use two extension poles together to make a really long pole saw....