Liftmaster 375ut Remote Control

[@EMFT]

I do maintenance on a golf and beach resort and in your video I found the perfect information to resolve the issue some of our guests were have with the garage door not opening. Thanks.

[@charlenel4677]

Thank you for your simple and easy instructions to program my universal remote and the remote that came with garage door opener. Your instructions were clear and easy to understand.

[@renee3815]

I would have never figured out how to change the battery without your video. Thank you!!

[@vsfall5655]

You saved me hours of frustration and a lot of pulling my hair out. Has all the remotes multi-functioning in minutes. Awesome tutorial.

[@jvirsikmiller]

Thank you for the detail about setting the DIP switches, then pushing the program button, and THEN pushing the remote button the correct number of times BEING SURE to wait for the LED to stop blinking after each push! The instructions with the remote we not that clear. I was also tempted to use a baseball bat on mine, but now I'm happy!

[@scotthodgins7975]

Agreed. I was also about to return my remote because of that. Thanks

[@moregreenfl71]

Thank You ..Great video, simple to follow instructions!!!

[@The_Drive_Inside]

Out of EVERY SINGLE VIDEO I watched online this was the only one that worked for me..... THANK YOU VERY MUCH. SUBSCRIBED!!!

[@bigb3941]

How to change the battery on a key change live master remote

[@dalugbue]

of all the youtube videos, this is thebest one! Saved me tons of time

[@GrandNanny]

Thank you for this very informative and easy to follow video!! I had about decided it didn't have a battery because I couldn't find it. YAY!

[@BehrBob]

Thanks for making this video. I purchased one but my only gripe is that it doesn't have a good range in order for my garage door like my other remotes.

[@dujushaonv8359]

thank you so much for this very helpful video. it was a great idea to stay close to the garage door to do the programming. thanks!

[@digipixsa2376]

Great video, simple to follow instructions!!!

[@janelgammill9289]

Thank you for making it all so clear!

[@Thedude2283]

Thanks for the clear instructions, just one question. How do I clear the codes on the remote? I accidentally programmed both of my garage doors to one button and I would like my each door to be programmed separately.

[@tjsingh9404]

I purchased a new Lift Master remote... just to get extra remote. Now I have two identical remote controls Model 375UT. How do I pair the two remote controls for a gate? Thanks

[@Tendertroll1]

Thank you 🎉

[@ronsjostrom]

The video much easier to understand that the written instructions.

[@natshain7746]

Can I use this remote to program to Genie SilentMax 1000 garage door opener?

[@josiascastillo6571]

Ur a legend sir

[@cryptocrush-823]

Big help! Thanks!

[@renegadedawg1]

Do you need to clear in set the dip switch to one section on or off for all the numbers since you're not using them to program

[@808ponds]

Worked great for me.

[@oswaldoviveros5273]

Can this remote (375UT) learn from another remote for example 372LM?

[@wormsyapples]

I am trying to pair a programmed 361LM with this new 375UT remote. The number 05 on the 361LM is in the 0 or neutral position. There is no neutral or 0 position on the 375UT. How do you deal with this?

[@juanmejia1097]

Same question

[@kyledrew5468]

You are the best the clicking the button 8 times is ridiculous but if it wasn't for your video I would have hit mine with a baseball bat

[@jayskade8350]

Does the outside keypad need to be powered on and functioning? My 9v battery is dead and I've never used it.

[@alfredfuller9261]

Hello Sir . Having problems with original liftmaster remote 2008 , replaced battery, and reprogrammed started to work from inside the garage and inside the house also works when I place the remote against side wall of the house and garage , but does not open when standing in front of garage door, when I have the door open it will close with remote but not close standing 15 , 20 feet or open . Please help wife is on my @ .

[@wilburbudz]

perfect Thank You

[@gatehousesupplies]

Check out the new Liftmaster 375UT remote control

[@tannermansfield5676]

My landlord just gave me 9 of these there is a slide gate do I have to do anything with the box at the gate or can I just move the small 1-10 slide buttons on the Inside to match the other ones that are already programmed so I don’t have to use the learn button for the new remotes,? Just set 1-10 the slides the way they are supposed to be and hit open close button the correct amount of times and it will work? Hate to ramble just trying to match our new remotes to the old gate

[@scotthenderson4376]

Mine steady when learn but doesn't flash and light go's out at 16 presses

[@judylindsey4363]

I am trying to figure out how to keep the gate opened when I have a lot of people over so it doesnt have to be clicked every time.

[@bobabney538]

Mine looks like the unit in the video, EXCEPT, it doesn't have a blue light, and more importantly, there is not a notch visable to open the back and change the battery. HELP!

[@sc666666]

Carefully use a knife blade to slowly pry all the way around until it pops open. You can use the knife to slide the battery out also.

[@reggiedunlop2222]

Very helpful video! But is this guy also a mortician?

[@ESPcrb]

Really... "Wife's butter knife"...

[@timwilson1840]

Its crap works fine unless your driving up.Then you have to play with it till door opens.

[@dianacampuzano6512]

Where do I buy that clip next to it ?

[@gatehousesupplies]

The clip comes with it but if you need a spare or replacement clip we sell them here www.gatehousesupplies.com/Liftmaster-clip-p/10-29c128.htm

[@Godsmylove]

I just need to change the battery but I dont know how to get into the device

[@gatehousesupplies]

It will show you at appx 4:08 section on the video

[@EV50400]

The assumption shouldn't be made that you have an old remote from which to inspect pin positioning. How do you program this with no old remote, and with no access to a learn button on a community gate?

[@gatehousesupplies]

What is the make and model of the community remote?

[@EV50400]

RCS-433CTG1. That's the remote. The community gate is a Liftmaster Professional. I'm not sure about the exact gate model. The home owners association isn't too keen on me asking questions about it. I'm trying to program this remote to open my gate, rather than spend $50 on a new RCS-433CTG1 remote. The old one was literally run over by a car and smashed when it fell off my keychain. .

[@gatehousesupplies]

Our remote would not be compatible with that unit, sorry.

[@EV50400]

+The GateHouse Liftmaster support said it would be. They're the ones who recommend it. Thanks for your help. Do you happen to know what remote would be?

[@ashleyhenderson469]

I do t know the original code..

[@locoshon1987]

What about gates can we program it for those too???

[@gatehousesupplies]

It can be used on gates with a compatible receiver, see compatibility list in the programming manual next to the product listing on our site. www.gatehousesupplies.com/Liftmaster-375UT-p/375ut.htm