Lightweight, precision 6mm Creedmoor AR-10.

This is a review of a lighter weight AR-10 in 6 mm Creedmoor. Smoke composites,DNA , Proof, JP and Lancer Carbon fiber make this a nice choice.

[@FrankThaThird]

"Hey Maa the best guntuber just uploaded a video"

[@XRING]

LOL! I appreciate you watching.

[@backfire]

Dang it… now I need a 6 creed gas gun 😢 Good review, Ray! I’ve had my suppressors work loose so many times that I’ve started using vibratite and just not removing suppressors at all until it’s time to clean.

[@Lethal_Intent]

Be careful with that seen many customers effectively weld on from rust and ruin a barrel as a suppressor is a giant moisture trap. Especially coming in and out of different temperatures. In europe, most guns are direct thread with no issues, with them being hand tight, use a thicker grease, and it'll hold itself in place for the hunt or range day.

[@mikecollins8241]

Get a quick release adapter.. you'll never get 1 MOA from it anyway... LOL

[@lurebenson7722]

Why just a weak 6 mm Creedmoor when you can buy from me one of my AR 10 uppers I build and sell in 6mm-284 Win or I have now I have one AR 10 upper for sale in 250 Savage and another for sale in in the light model AR 10 upper in 300 WSM. The AR 10 upper in 250 Savage is a 24 inch Pac Nor SS super match in 1-10 polygonal rifling for shooting bullet 100 grains and heaver and as it is now it shoot @ 100-yard 1/2 MOA or less depending on brand of bullet and types of powders. Or you can check in with me for all the noncommercial chamberings in AR 10 uppers I build and sell. If you or anyone else would like to have their own AR 10 upper in any of the WSM magnums or WSM magnums in 25-300 WSM or 6.5-300 WSM I offer these also with a price of $1800. prices are from $1500 to $2000 and the barrels are Pac Nor barreling stainless steel super match barrels and some use the polygonal rifling or R5 rifling. All of the WSM magnum uppers come in 25.5 inch barrels and can be done on the light model or heavy barrel model.

[@bender43718]

Merry Christmas. Bought me a Barrett MRAD this year for Christmas.lol

[@XRING]

That’s awesome Bender and congratulations! It is one of my favorite rifle platforms by far. You will thoroughly enjoy that I am sure.

[@gt1601]

I replaced my grip on my 6.5 Daniel Defense bolt with the same grip you have. Love it!

[@codyshelton8484]

Great review, beautiful tool. Thanks for your time

[@Rucksack57]

Always good to see video’s from you.

[@timrink256]

Cool piece. Big fan of AR 10s. Hope you had a great Christmas with your family. Thanks for the video. Be Safe

[@RussXnimbusX]

Merry Christmas, Ray. Thank you for your reviews and for all of the remarkable firearms that you've shown us throughout the years.

[@bryanduchane2371]

Amazing how much of a difference good camera equipment makes in your videos, Ray. Your content is always on point, but the better camera equipment makes a huge difference... I'm sure your views increased with better video...

[@jasonrad9332]

Merry Christmas Ray!!!

[@2punish1]

Gorgeous ar-10!!

[@chrism2042]

Purchased a Smith & Wesson Performance Center 6.5 CM a few years ago, changed the stock to a Magpul PRS, using an Arken 5-25 scope and Ultradyne Apollo max muzzle brake. Shoots

[@LL-be3rh]

As always Ray , great video.

[@talkingrock7011]

Definitely a nice build Ray ,, you needed a new way to scratch the itch !

[@cliff4695]

Expensive option but it does come in pretty light for a full kit

[@poorfatman5317]

Merry Christmas 🎄

[@hopewilliams6705]

Merry Ho Ho & Happy New year!!!

[@XRING]

Same to you as well and thank you for watching.

[@Obstreperous1]

Great video! Thanks for sharing!

[@GAGGABYTES2024]

You got some cool set ups like ray bud

[@Goose2448]

If there is a way to smooth the gimble and slow it down with the tracking. I don't know anything about them but it seems it's tracking a single point, resulting in the constant movement. I'd hope there would be a setting to make it keep the subject in a box. That way you can bend down or move a little without the jerk of the gimble. Not a negative comment by any means. Loving the content. Found you recently and soaking up what I can about long range. Keep up the good work.

[@quarters-eye8922]

Merry Christmas 🎄🎁

[@rayjohnson4662]

Merry Christmas!

[@lorcan2316]

Love this. Though I’ve always wanted to see what a 14.5 6 creed could do. Maybe one day

[@dannyv.6358]

Thank you sir!

[@thelonggunner762]

I love the 6 creedmoor cartridge, I just wish it had a little longer barrel life.

[@lurebenson7722]

You have your head filled with barrel burn out nonsense. I build and sell custom rifles and AR 10 uppers for sale with one wildcat cartridge is use is the 6mm-284 win that use a 30-06 powder type and same charge of powered and for the long action version is the 6mm-06. Never after some 2000 + rounds of ammo gone through these rifles of this cartridge never has a barrel burned out or changed in accuracy. Barrel burn out only accurse in competitive shooting when shooting thousands of rounds of ammo over and over in a week on per month then the barrels get hot not from someone hunting and shooting coyotes or plinking at targets. The next to consider is the type and brand of barrels which some of better or worse than others in quality. These carbon fiber wrap barrels that is all the fad now gunsmiths are telling me 9 out of 10 of these barrels are complete junk. I also build and sell AR 15 uppers in 17 Remington so knuckle heads say that will burn out a barrel on 100 rounds - WRONG ! they go and go for thousands of rounds of ammo shot through the barrels

[@samcshooting]

Nice build out

[@XRING]

Thanks Sam.

[@chaspruitt2610]

Enjoyed the video, thank you!! 👍🏼

[@conservativesniperhunter7439]

Nice AR 10👍. Merry Christmas and a Happy New Year to you and your loved ones. Bring on 2025 😀.

[@jefftaylor7041]

Merry Christmas

[@XRING]

Thank you Jeff and thanks for watching.

[@SanExupWyo]

Awesome video and process, even with the first day blues. What have you found to be the best supressor mount type for accuracy?

[@garrettwilliams7819]

Nice rifle! Love the Proof barrel, what length did you go with?

[@AnonTaylo]

My CA-10 in 6.5 shoots half MOA consistently at 100 yards with Hornady ELDM.

[@andyd2960]

Nicer than anything I have in the safe

[@lorenkrug]

I’d like to see AR-10 parts made with Magnite nano composite alloy

[@fowllab]

Merry Christmas. From what I have seen from DNA, their rifles normally shoot very well. Did they build it or did you? Regardless that is a nice rifle.

[@XRING]

DNA makes great rifles. This was not a DNA build.

[@momirdjakovic2638]

Could you make a training video on how to get rid of flinch when shooting pistols and rifles

[@cee3]

Did you ever actually mention the weight?

[@cbrooks2767]

18:33

[@blakenoble9468]

I got the savage msr10 precision model in 6.5 creed. Man I've only taken it to 1100 yards . It's a gas gun and by far my most accurate rifle. Insanity and shoot like a .556

[@LRRPFco52]

The MSR-10 is one of the best-designed and built mid-frames on the market. The adjustable gas, gas tube flange seal with nut, fluted barrel, flange-fit handguard to upper, chromed bolt carrier with forged gas tower, dual ejectors, sprung firing pin, 2-stage trigger, and smaller receiver set make it really cool. Feels like a medium-heavy barrel AR-15.

[@lurebenson7722]

I am sure you are talking the KZbin groupie parrot mouth talker's fad of shooting this nonsense 1000 + yard fad and if you stood on a street corner of a long strait street then asked to point to 1000 yards you would claim 2 city blocks is 1000 yards. Shooting to 1000 yards is not some easy thing to do and takes Highly specialized rifle and ammo and optics and even seeing a target at 1000 yards isn't that easy as I have used a Leupold 1400-yard capable range finder to see what 1000 yards looks like. I have looked at a 4'x8' target through the Leupold 6.5x20 power scope and that target looks like a postage stamp size on 20 power, then the Rare Brevex Mauser in 8 mm-378 Wby mag the scope is on when I shot at the target a small number of bullets hitting the target was scattered all over the target, proving it isn't worth wasting the ammo on such nonsense.

[@ScorpioSin777]

Scope and all fasteners torqued? It might just need a different ammo/bullet weight. Some rifles are finicky as I am sure you know… I have also had some weapons that needed to be broken in. Looks like you got it though.

[@sporkstar1911]

Whats the difference between a .243 Winchester... does it have a wider case/capacity? I only say that because .243 is 6.2mm

[@kensmith8832]

I have been planning to build a 243 Win, does the Creedmoor feed better than the 243Win?

[@GAGGABYTES2024]

Quick quistion ray bud..what if you had to bug out what would your go to go gun be ? Rifle and pistol ?

[@XRING]

My grab and go is a DD MK18 and a Glock 19.👍🏼

[@GAGGABYTES2024]

@XRING nice

[@GAGGABYTES2024]

@@XRING MK18 AR15 style

[@GAGGABYTES2024]

@@XRING GAS SYSTEM: Low Profile Gas Block CNC Machined of 4140 hardened steel with Mil-Spec Heavy Phosphate Coating, Carbine Length, Direct Impingement

[@samlane7142]

I just got a brand new SR-25 in 6.5CR id LOVE to send you for a video if you'd be interested!!!

[@XRING]

That would be awesome! I just saw one at the local store in .308. If you are serious, please email me at [e-mail]

[@samlane7142]

@@XRING Absolutely!

[@hopewilliams6705]

That could be awesome

[@user-jv4ic8rh4d]

Which glass do you prefer, USO or NF? Trying to decide for 6.5CM

[@richardskibo6552]

Merry Christmas Ray. Question… barrel nut torque. Do you notice any change in accuracy with different torque specs?

[@XRING]

Hey Richard, great question. So, I learned a long time ago that there was some exhaustive testing done with regards to accuracy and barrel nut torque on the 15. I was told the happy number was 42 ft. lbs. Not sure if that changes with the 10 platform.

[@richardskibo6552]

@ I built a 6.5 creed with premium parts and was expecting better than the 1.5 moa I’m getting out of it.

[@richardskibo6552]

@ Aero M5E upper/lower Barrel: Wilson Combat 24 in super sniper. BCG/Buffer Tube Wilson Combat Trigger/Safety: Trigger Tech Lower Parts kit/gas block and tube: Aero/Superlative Arms Charging Handle: SilencerCo Grip: Ergo/Stock: Magpul Buffer system: JP Silent Capture: Anti Walk Pins.

[@LRRPFco52]

​@@richardskibo6552If you have a good barrel, you need to bed it into the upper. You also need to ensure your receiver face is square. Gas block needs to be bedded to the journal, preferably press-fit. Gas tube mustn't clip the carrier key. I've seen really high-end builds with billet receiver sets and Krieger pipes that wouldn't shoot until I bedded them. 1.7" 5rd before, .6" 5rd after, same load. Wilsons have been hit and miss lately, but if the barrel can rattle around in there, you won't have consistent repeatable shot placement. AR-10s also require very solid fundamentals with excellent position build-up, not free-recoiled.

[@joshwebb609]

6arc all day

[@logicae4096]

Man, which state does X-Ring live in? I would love to have such a range...

[@XRING]

North Carolina . In the mountains.👍🏼

[@rbeto1]

What tripod is on that rifle?

[@CJAcacio-u2u]

Bella

[@ScorpioSin777]

What is the weight on that? Is it a DPMS pattern? Gen 1 or 2?

[@airenthusiast2000]

First! Merry Christmas Ray!

[@XRING]

Thank you ! I hope you have a great weekend and thank you for watching the channel.

[@sarasears3264]

What ear pro are you using

[@mikecollins8241]

No family close enough for me to spend Xmas with so i took a pair of my AR's to the range Xmas morning :)

[@JustAnonGuy]

Out of curiosity, what earpro are you using?

[@XRING]

Otto Noize Barriers. No BT function but I have been using the’ for about 4 years now.

[@JustAnonGuy]

Awesome thank you!

[@aaron.from.winchester6744]

Have does the ballistics compare between 6CM vs 6 Max?

[@LRRPFco52]

2960fps mv with 108gr from 6mm CM from 24". 6mm MAX will do 2750fps with 100gr from 24", won't mag-feed the 108gr from an AR-15.

[@ericrumpel3105]

Thanks fer sharing,....just can't get myself to ever owning an ar anything. Merry Christmas & a Happy Healthy New Year.

[@cadetbooth]

Going to Mammoth?

[@whome3911]

I want one in 6.8western! Gotta find someone who will make it

[@rideordietheyretring2tranx382]

ar-10? hm. 6.5 Grendel in ar=50 next? 6mm arc fits ar15

[@rideordietheyretring2tranx382]

it didmt even move tho

[@David-O970]

And there goes the “checkbook” again…….

[@thomasteac8919]

Try some Match King.

[@scourge18a]

Did i miss the weight?

[@XRING]

It’s at the end. Complete weight with optic mount suppressor as shown was just over 12 pounds.

[@scourge18a]

​@@XRING Thank you sir

[@KSIXRIDER]

Merry Christmas. If you want to sell your CZ 457 setup, let me know.

[@XRING]

I appreciate the offer but that one will be around for a while. Thank you for watching.

[@Deedeedee214]

"it is lightweight"....12+ lbs. 😂

[@JakeSchlade]

Happy New Year, Ray! Rifle, meh.

[@XRING]

LOL! Thank you Jake!

[@GAGGABYTES2024]

Canny looking gun that like

[@standbackitsgonnablo]

hornady 140gr 6mm creed ? really ?yeah I don’t think so..!

[@bnicedanicest6288]

I like the Hornady 87gr Varmint bthp bullet loaded w Shooters World Long Rifle powder for my 6CM when I hunt coyotes with it I built me a traditional varmint cartridge LR-308 in .22-250 can shoot a 1.25" from 440yds with it 50gr zmax with Varget I recently posted a video shooting a 5 round group from 456yds with it 45gr Sierra varminter spitzer bullets w Varget very soft shooting not heavy at all plus all blem Aero Precision upper lower and handguard On clearance Vortex Viper ADM qd mount GS2 trigger black friday sale 89$ taken alot of coyotes with it, has a Blackhole Weaponry barrel it also has a Seekins precision adjustable gas block I got on sale and just a magpul rifle stock got both on sale at primary arms about 100$ for both that 6CM can be gruesome on them coyotes I would not want to be shot with it if I didnt get to go instantly and feel the pain and have a big hole feeling that pain my first coyote I got with my 6cm was at around 360 yds with Hornady ammo 108 eld blew tape worms everywhere out the otherside I only use my 6cm for targets now I have a ruger predator .243 I like because it is light I like 55gr Nosler Varmageddon for coyote but a gruesome bullet too I like the 80gr ttsx for antelope and the 95sst for deer with it Happy Holydays Ray

[@alexjoseph8363]

Bad caliber choice. Carbon fiber is so expensive and unnecessary. Huge thumbs down.

[@wector5111]

Где челлендж на милю?!

[@ronniegreene1274]

Merry Christmas

[@XRING]

Merry Christmas to you as well Ronnie!

[@mikelaseck2688]

Merry Christmas