LINE-X Coating from A-Z

We stopped into the Bakersfield LINE-X to see how this coating is applied. Actually a very cool product.

[@wrxsavvy]

Nice vid Can't believe that dude was sanding the clear coat with no mask.

[@OneEphraimite]

Young dudes and their arrogant invincibility posturing, then they get cancer and here comes the lawsuit🙄

[@sasa1982uk]

Well...he wont last long

[@gregorysrock2321]

Kids are kind of dumb these days, just saying.

[@packetattack7437]

Not a big deal since he drinks hardener and eats fiberglass with mustard on top.

[@soapbox187]

Probably a firefighter. They already breathe in all types of chemicals on the job whats a petroleum based product on top of that haha. Besides, firefighters are covered for pretty much every type of cancer.

[@adamemac]

Nice, I can finally cover up the screen door in my submarine.

[@btuff]

Make sure you check out the race trailer that was Line-Xed a few years ago. Looks like new still.

[@AlejandroSanchez-kf2mj]

Price $$$&

[@tpol7042]

this should be an option for the frame and exposed metal underneath vehicles when you buy them. the undercoating dealers offer is crap and just a moneygrab. if this really works and is as durable as claimed, people would pay top dollar in northern states to have their frame done because of how terrible the salting every winter is on cars. i know i would.

[@aaronhobart6223]

Ya but then you would never buy a truck again they are not going to do that option

[@Partyatmosphere]

Linex seals anything and everything permanent. You wouldn't be able to unbolt anything under your vehicle ever again

[@eswar941]

Can use this on flat roof top is it available in India

[@Sembrandolasemilla777]

Dang I’m doing this to my Silverado and here Iam sanding to bare metal and I bought different kind of sanders to make it easy 😳🙄🙄 and I see this barely sanded, I’m just gonna spray it now

[@limeylit]

worked there 3 years, why is he not doing the rails from the side??

[@jmwlife2k]

Didn’t know you were from Bako until the end of the video lol. I’m planing on getting my bed sprayed soon. I wonder how well it holds up

[@ecomhicks]

I used to do Perma-tech back about 10 years ago, it's similar to rhino-liner, not doing it anymore so I have no reason to promote. I'll say I've seen many Line-X , perma-tech, Rhino-liners, they(any major brand) hold up exceptionally well as long as bed is prepped right to start with. I have two trucks I did 18 years ago, aside from a few very minor chips, approx 4 about size of fingernail and a little fading, they've held up well. I could probably use some kind of restoration stuff on them and they'd look better. But Yeah, great investment.

[@_P0tat07_]

I really want a linex Bed liner. It looks so nicez

[@zumezoom9593]

8 yrs later... does lineX spray different colors other than black?

[@balwaantbeerlall3653]

where do you get this line-x coating to buy

[@jonmadden3951]

Had linex installed on my new 2012 long bed , peeled off , I can scrap it with my finger nail ! Pure crap job on prep , contacted them and nope no warranty , thx wpg linex

[@traceykays433]

That sucks.

[@dcyphrz8532]

Like you said, it's the prep. If you contact corporate, they would probably help you. My neighbor's kid did that. Cost him a drive to Alabama but they replaced it.

[@shylildude]

does it come in pink or any color other than black?

[@ericsweeney4544]

shylildude It actually does! Tyler, your a fucken douche bag

[@richardcline1040]

if its so grt why cant i gt a garantee for leaks for my tracker boat

[@manriquebautista9984]

Excuseme Mr Billy what is the mark and model of the equiped your used for aplication of the painting. I am very interesed in one quiped of this caracteristics. Tank you by attention.

[@DonDomel]

When the suspension part is totally new, how to apply linex ? Should I prepare surface somehow before spray ?

[@J.Johanson]

Just got my duramax done

[@mattrobertson8265]

DirtyJDiesel does it come off ?

[@soapbox187]

What are the four holes on the corners of the bed? I noticed all liners have them doesn't water get into that?

[@btuff]

For a latch hold down

[@God_is_Justice]

Im in sunnyvale, where's this place at and how much to do 2016 chevy colorado long box? thanks!

[@fatguy5596]

this is awesome how much would it cost 🤔

[@btuff]

500

[@nicwaterhouse1014]

Depends on the state but usually around $550-$650 depending on what all is sprayed I work at 2 Line X

[@tonyb7748]

Bought a truck with a bed liner on top of a line x spray and I wondered why the bed liner? The previous owner tried to hide the failures of the application. The shop he used wasn’t a legit application garage. Beware if you inherit or purchase one yourself

[@sonicsgaming5052]

There's also one in El cajon the boss name is Patrick Conway manager scott

[@onenut2810]

I love this stuff. you can sell some good phone cases.

[@luissonoma6255]

What grit sanding disk is he using?

[@Timmyskills]

I think k that's the same Graco sprayer they use for spray foam insulation

[@brendanness6828]

I work at a Line X that shoots 10 plus trucks a day and that sprayer takes way too long

[@limeylit]

why was the clear coat shown but not the texture process, thats the tricky part (worked there 3 years)

[@johnornelaz853]

Hey man where are you located i whould i really want to do this to my truck.

[@diesellozano7874]

There's this thing called a phone you enter linex dealers

[@diesellozano7874]

On your maps

[@cashvendetta]

Yeah, if you want to go to this specific one... it’s Bakersfield Line-X

[@Yooshroom]

He said it 2 component polyurethan (PU)... This is polyurea (PUA)

[@factoryfinish2835]

hi what graco reactor are you using to spray

[@CashNYC]

how much does that cost?

[@Tungsten23]

I wanna do this to my truck, but I don't want to go to town with a sander on the back of it, and drop ins suck.

[@jamie91433]

It's worth it, if they don't sand it it will peel like crazy

[@CH-gq3rl]

What maintenance is recommended ? armor all ?

[@ecomhicks]

I used to spray in permatech, similar to rhino. Armor all is oil based so it will be slick as shit, STP Son-Of-A-Gun is water based and not as slick, that's what the manufacturers recommend on these spray in liners.

[@michaelraines8625]

How much would it cost to Line-x a whole JK wrangler? 2dr

[@diesellozano7874]

Cheaper to do it your self

[@tracematson385]

Diesel Lozano where do you get the line-x from?

[@cashvendetta]

Probably about $2,500 - $3,500

[@dcyphrz8532]

If you call the Murfreesboro Tennessee location, the owner did her whole Jeep but I think it's a 4 door. She could give you some idea.

[@osvaldorivero4242]

BRAVO !!!!

[@chiwas]

Price? How much this one CO$T?

[@mjlvd3]

St. Louis Line-X charged me $520. considering my rubber bed mat that covers the bottom surface only is $140, this is something I should have had done immediately and not 2 years down the road.

[@victorolguin]

i really like this. 1.5 hours and this place over here in FT Worth, TX wanted to charge me $600. WTF...........

[@happity]

Lol ya, I kno rite, it should b more like 50 dollas plus tree fiddy for the bus.

[@mjlvd3]

The cost is in the chemicals, I assure you.

[@isaakayala8667]

Where in Bakersfield is the location?

[@m14v81]

Isaak Ayala California Fresno is also California

[@viplami]

How much?!

[@NewSprayParts]

where his protection?

[@BuddyBullwinkel]

UNDERCOATING I just had my frame replaced by Toyota and the tech guy said if it was his he would have it undercoated I know Line-x was made for bed liners but some are using it for undercoating Fender wells, bottom of the bed, cab .. so hard to get to. No matter how great the product * If the surface was not clean * If the spray could not get to the surface No undercoating would be effective... So what steps would a linex shop do to prep and spray under a truck body, the frame ect ?

[@ecomhicks]

Degrease and scuff the finish so the liner has something to bond to, don't take it down to metal.

[@IMAWESOME810]

Has anyone thought of making captain America's shield out of this stuff?

[@3089280288]

Does it work on roofs?

[@diesellozano7874]

Car roofs?

[@3089280288]

Diesel Lozano yeah and house roofs

[@successandlifestyle]

Metal gazebo roofs 😊

[@longsleevethong1457]

I want to use this for bottom paint

[@sidebarr7]

They dont sell this in kits , You have to go where they spray it on for you and charge for spraying. Does anybody know where you can buy a gallon or a kit?

[@benwilliams3539]

+sonny Godly you can get paint tins of it, various brands, herculiner seems to be the big one, you just roll it on like paint.

[@sidebarr7]

Thanks Ben ,I recently went with raptor line and did my ranger ,whole truck except the inside of bed , comes with harder and color tint. 6 25 oz bottles go it done and Im happy with it. used a low pressurized sprayer from harborfreight and worked out great.

[@mohamedelbadawi2442]

what's the effect of this spray on human skin ..

[@carlosb1]

makes it more tougher and durable

[@mcgill72143]

You become a superhero.

[@BigJohnsonGG]

It makes you die! Use a OE drop in liner, handles impact so much better and do not need to remove your factory rust and corrosion warranty from the manufacture. I'll spray paint your bed for $400.00 if you want? We can do the bowling ball test and see who wins, it won't be the spray in!

[@jeffaleman7779]

How much does that cost I just bought a new 2014 duramax long bed

[@jamie91433]

About 550- 750

[@GerardoTGS]

does this spray really work as they say?

[@diesellozano7874]

Yes

[@daviddelacruz7496]

Raptor liner keh

[@vdpeer]

It fades after a while, but so what? I had it sprayed on those silly looking huge chrome "boobs" on my 09 LTZ, masking off a clean lline just below the fog lamps. Big improvement in the looks of the truck. After a couple hundred times through the car wash, the fans at the drying end loosened up the membrane a little, so I epoxied it back. All seems OK now. The chrome on those boobs is a little slick for holding the linex.

[@Tungsten23]

Chrome boobs? You mean the bumper caps on the front? Just get the painted ones, they look more classy.

[@JloBroOFFICIAL]

But will they line x my drumset?

[@tmhjahusa]

Is it fireproof?

[@m14v81]

I was like holy crap did he just say Gallo winery... Then he said Fresno and I was like no freaking way..

[@xyokox901]

darkmente14 Martin Fresnos lit

[@PmppuRus]

Отличная штука. Только оборудование дороговатое

[@mongolshikho880]

PM&PPU А где можно достать эту херню, не знаешь?

[@PmppuRus]

Mongol Shikho привет. Вот здесь pmppu.ru/oborudovanie-dlya-napyleniya-penopoliuretana-i-polimocheviny/pnevmopistolety/voelkel-industrial-products/

[@markshepherd3701]

Sanding without a dust mask and goggles is not only stupid, it is also illegal as it violates OSHA rules.

[@BigJohnsonGG]

Agreed, workmans comp claim waiting to happen! He lived a good young life.

[@alanshelby5980]

They sprayed over the plastic plugs on the bedside. Not a good Idea.

[@0REDSOX7]

First thing I noticed...

[@allenletizia321]

What they use for primer ?

[@dickweeeeeeeeeed]

.....primer........

[@kjanisse29]

dickweeeeeeeeeed doesn't actually get primed, sanded wiped then blown out

[@car24dude]

At 2:23 no gloves, no mask, no safety glasses……..

[@jn1329]

Sprayed over the caps.Happened to me.How are u supposed to tie shit down

[@dcyphrz8532]

The Line-X I went to said they usually spray over them. I pulled the plugs out and snapped them back in later. I had already pulled the removable tie points.

[@Spawn223311]

put this stuff on tires!!

[@carstarsarstenstesenn]

I don’t think that would be a good idea

[@btuff]

bakersfield

[@nicwaterhouse1014]

You’d be fired at the one I work at NEVER GET IN THE BED that’s risky

[@flavvlopablo]

paint it in a lock so it can be invisible

[@SBJCTV]

hydraulic press vs line-x

[@largewhitemanmeat3139]

Wont it fade after time and look like crap? Possibly peal? And omg that has got to be hard to watch, someone scuffen up a brand new truck bed, lol. Of course if up use it unprotected that's much worse.

[@dcyphrz8532]

They sell a UV coating now. Keeps it looking pretty much new. I've experienced no peeling.

[@maxleong77]

polyurea paint

[@maxhammontree3169]

The line x dude sounds like Ben Shapiro.

[@lanceroark6386]

Bako

[@lanceroark6386]

I came here to talk shit....looks like I beat myself to it.