Lipsey's Exclusive: Smith & Wesson Ultimate Carry J-Frame

[@FCV0511]

I'm always thrilled to see a new S&W revolver without that ugly internal lock hole. Hopefully this is a sign of things to come. The new sights, the enclosed backstrap boot grips, factory chamfering, and the 32 H&R Magnum chambering to allow for six shots in a J-frame are absolutely delightful features. I can only hope that a similar configuration is planned for a K-frame sometime soon!

[@brianclassen5221]

The Hillary Hole.

[@mofozi]

For real did they decide they no longer like money ?

[@finalcountdown7658]

These models (the 642 and 442) already existed without the lock....

[@mofozi]

@@finalcountdown7658so don’t buy one 😂

[@finalcountdown7658]

@mofozi Apparently, you're not too smart. What does me clarifying that the 642 and 442 already existed without the lock (as do other S&W Centennials) have anything to do with whether I want to purchase one or not?

[@grapeshot23]

This is the exact gun I’ve wanted for 20 years. Kudos Lipsey’s, I’m in for one!

[@SnubThug]

Two weeks ago, I purchased a brand new 432UC and had to send it back to Smith and Wesson because there was rust all over the ejector rod plus scratches adjacent to the faceplate screws. This is my 2nd S&W revolver, and I am disappointed with the lack of QC.

[@ccalhoun0016]

Finally someone the j frame everyone wanted. Excellent job guys.

[@logangodofcandy]

Pretty close to the performance center version

[@LipseysGuns]

Thanks!

[@Theophilus1968]

Day late and a dollar short now that Kimber has the K6xs six shot revolver that’s the same size as the five shot j-frame.

[@jfm562]

@@Theophilus1968 how much does the Kimber weigh? I just checked. 15.9 ounces. The S&W is what I've carried since 1992 and the right choice for me. It comes down to the cylinder release for me. The Kimber has an MSRP of $679 which is less.

[@royc2390]

@@Theophilus1968 non adjustable sights on that k6xs.

[@alacharger]

I'm in! You had me at 32 H&R magnum!

[@Martin-m1f3l]

Had me at trigger reach for large hands

[@mrchavez1967]

32 H&R Mag is an awesome caliber, isn't it.

[@alacharger]

@@mrchavez1967 Yes, it is!

[@jameswilkes3186]

The .32 is a winner. Thanks from another old revolver guy.

[@adamw4469]

These are what a J-Frame always should have been.

[@williamryan9195]

These are both similar to the 640 pro series which had the adjustable sights and slab barrels.

[@williamryan9195]

So these are really nothing new. Just nicer and more options.

[@adamw4469]

@@williamryan9195 better trigger, better grip profile, almost half a pound lighter than the 640, sights specifically regulated to the most common carry loads today.

[@williamryan9195]

@@adamw4469 If you look at the J-frame history these are really are just the remake/red-do of the 640 pro series.Even the VZ g-10 shape and palm swell are basically the same profile as the old Pachmayr Gripper grips. I agree the Centennial Air weights were lighter that the 640. But the 640 is far better a weighted handgun for the cartridge it shoots. I have the 442 Pro series and it was the first thing I switched . I don't use the sights anyway. But lots of users wanted them so I am glad they offered them to those who think they need them.

[@TedJ71]

Just like the old air weights of the 70’s

[@toddparsons2980]

WOW! These look GREAT! Awesome upgrades like the sights, grips, trigger, chamfering. And the biggest bonus is NO Hillary hole.

[@oleopathic]

What's a Hillary Hole ?

[@ThecrazyScotsman]

327 Federal would have been nice to see as well

[@HarrysHolsters]

They should have but I'll take 32H&R!

[@robgarrett1781]

The alloy frame can’t handle the pressure of the Fed Mag round. They would have had to use scandium and it would have been over $1,000. Look at the crazy price of a 340PD. Plus Fed Mags are horribly punished to shoot.

[@toddparsons2980]

Would require different frame.

[@HarrysHolsters]

Every current production centerfire scandium frame gun is over $1000@@jodynorris6975

[@niadhf]

​@@jodynorris6975 I believe Rob is basing that on what the scadnium frames (which a lightweight 327mag would need to beento handle the pressures) that S&W currently make, cost. By using the aluminum frame and steel cylinders, within the limits of pressure of these cartridges, the cost is kept down.

[@ec2749]

Did not expect this. Now I have to buy one in 32. Nicely done gents

[@johnlacasse8893]

Y'all hit it out of the park with this one! I absolutely love these revolvers.

[@fujmilla]

Absolutely excited about this. Have carried a j frame for 15 years. Have been hunting a 32 S&W j frame that I could afford for about 4 years. Carry a J frame daily off duty and will continue to do so. Thank you for putting together a package like this. I also noticed no lock, a definite plus.

[@olvera6710]

The 32s are gonna sale like hotcakes. Hopefully S&W can keep the quality control up.

[@aaronbruns2450]

What an awesome project. Looks like everyone knocked it out of the park.

[@buddditchendorf1847]

Looking forward to it! Brining back .32 H&R is a positive!

[@logangodofcandy]

Not in the Biden ammo marker

[@LeroyJenkins-ul1kb]

@@logangodofcandy what is that?

[@oneshoeless]

Finally! Another option for 32 HR Mag! One of my favorite rounds. And without "the hole"? I'll be picking one up!

[@williamryan9195]

Me too.The 32 should have always been a staple in their lineup.

[@Gieszkanne]

32 H&R is the best caliber for airweight snubnose.

[@ericthered7226]

Man, everything about me wants a 32 Mag, but every single time I look for ammo..... Nothing. That's the only thing holding me back.

[@Tyrone-db8mo]

​@@ericthered7226same here, only defensive loads i can find are from double tap and buffalo bore

[@bobhill3941]

​​@@ericthered7226That's my only catch too, availability, that's why I was surprised Lipsey's/Smith and Wesson offered that chambering.

[@alexgyorko6464]

Every time I think I’m out they pull me back in. I will be looking for one.

[@sowelu9247]

Same here. Saving all my nickels now. lol. This looks great. I hope they make a ton of them.

[@rockydiggerdog3462]

LMFBO😂

[@oldcop18]

I’ve been carrying a lightweight J Frame since ‘68 & am looking forward to trying one of these new ones.

[@Gieszkanne]

Sound very good but also expensive. To bring back 32 H&R is fantastic! S&W should bring back 32 H&R as stock revolver! A 7 shot .32 H&R airweight k frame would be very nice also. UPDATE I looked at their hp MSRP $759 is less than I thought it would be. From the video I thought it would be around 1000.

[@craigr.h.laurent240]

One usually gets what one pays for.

[@Jx12346]

Man this is exactly what the j frame needed. I have to have one.

[@thedriver5462]

Thank you guys for doing this, I will order both models in 32. This was long overdue

[@datsun40146]

WOOHOO!!!!! A new .32 mag revolver. I’m SO pumped! Y’all are knocking it out of the park

[@johnsmithjr.1731]

Next tell s&w to bring back the m&p360 in 9mm 327fed 357/38. And go ahead and have em bring back the nightguard series too

[@logangodofcandy]

Nightguard guns were EXPENSIVE guns that didn't sell very well. Adjusted for inflation, you're looking at a $1300 revolver. They just need to bring back scandium frames

[@Jmr6813]

This is awesome! I plan on buying several of the 432s and 632s!

[@wallyzworld7108]

Nice, finally a descent set of sights on the J-frame alloy revolvers, but why no 3" barrel options (gives the full length ejector rod). Any chance Lipsey's can get S&W to bring back the Night Guard series revolvers with 3" barrels? I believe a 3" barreled 315 and 396 would be a hot sellers for us revolver shooters out here.

[@chipsterb4946]

I had a 642 for a long time. Bought an M&P 340 because of the big, luminescent front sight. Both models have been available as separate SKUs without the infernal lock for years. That said, I think Lipsey’s really hit the ball out of the park with these special orders. The drift adjustable rear sight is simple but great. I’m going to consider VZ 320 “wrap around grips” for my J-frames.

[@sombra6153]

Those features need to be standard on all J-frames. Any gun smiths, or even S&W’s shop performing work to install those sights and other features on older Js would be welcome. Will the grips become available for purchase?

[@stvnbryan5542]

632 !!! I am so happy you brought it back! Next make a .327 Fed Mag.

[@kingdave77]

I’m not sure why they didn’t go with .327 Fed Mag, because you could still use .32 H&R Mag, and the various other .32 rounds too.

[@HALO-2304]

​@@kingdave77 Same. Seems a missed opportunity, but then again, they've suffered from the 'NIH' (Not Invented Here) mentality before.

[@kchapman2260]

I have a 632-2 in 327

[@Gieszkanne]

@@kingdave77 Because an aluminium frame cant handle 357 mag nore 327 mag!

[@1TickedBabe]

Dose it HAVE TO BE Aluminum. Would definitely buy a 327!

[@rustwins4442]

Great work guys. I'm so happy to hear that the .32 is back! Thanks for making it happen.

[@fcb6288]

My favorite carry gun is still the J frame and always will be. This is perfect and I am very excited to pick one up. Thank you!

[@Tnads667]

Amazing! The J frame I have been looking for.

[@c.miller3802]

About time ! Our j frames have needed better sights for a long long time!

[@QuantumTactical]

Thank you for this!! I already have nearly 400 rounds through my 632 and I just picked it up 2 weeks ago. It is so fun to shoot and as accurate as my larger wheel guns. The action is smooth and predictable. I love it!!! Thanks for all your work!!!!!

[@benjaminmoore3373]

So.. When are these going to be available? I love wadcutters in a snub and you had me sold when you mentioned 148 grain dialed in with those beautiful sights.

[@LipseysGuns]

Looking like late February availability!

[@glockmpw]

Any word on MSRP yet?

[@RR-jc8jh]

@@glockmpw$759.00

[@happyamerican3235]

Gotta be over $800. Especially on the 32. Gotta pay for all that first time tooling and those VZ grips.

[@efreutel]

I am reading many concerns online about S&W quality control issues on brand new revolvers. Many round trips to the factory for new guns with scratched frames, mis-punched sights, poorly finished cylinders. burrs on the forcing cones, out of time issues and incorrect cylinder clearances to name a few. I hope Lipsey’s holds S&W accountable for these quality issues. Customers are noticing.

[@NoHomo1776]

I like it. Would be nice to make a 686 + version.

[@jerroldkazynski5480]

I'm all-in for collecting precious metals. And the firearms industry keeps me collecting some nice ones.

[@anthonymazzant3690]

I have a smith and wesson in 32, it took me forever to find it and have been carrying it everyday for over a year and a half. I love it but it has the blade sights. Ammo is a nightmare to find I have to buy it from gunbroker at a premium. Hopefully with this coming out manufacturers will ramp up production on the 32 h and r magnums.

[@justintracy7226]

I was hoping it would be available in 33 or 327 and was not disappointed! I think it’s ideal for a small revolver like this. I often carry a Ruger LCR in 327, but loaded with 32 H&R, but I’m a metal guy when it comes to guns so I might have to do a little swap!

[@michigunsanta8680]

I carried my 327 LCR for quite awhile and it’s a pretty great package especially with that 327 federal mag punch, but I think I’d love that black 632 with those cool grips and the great sights! I’ve got a a 642 pro but the trigger is so heavy and such a long pull I’m not very accurate past like 7 yards. 🤷‍♂️

[@philliphill4763]

S&W didn’t stand up to their "lifetime warranty "; they sent my j frame back stating it was unrepairable. Best of luck with your new S&W purchase. ;-)

[@georgedasani9095]

What happened?

[@philliphill4763]

@@georgedasani9095 nothing, that's the point!

[@JEEPDadXJ]

I've added Pachmyer round rubber grips on both my 642 and Charter Arms Undercover, both were greatly improved.

[@SuperTrb0]

I’m so excited to see these. You all knocked it out of the park. So many of the things you’ve done are things I do to my own revolvers. Being able to buy something ready to go out of the box is awesome. The 642 will go great companions to my 342Ti, 340PD, and 640 Pro.

[@whenpiratesattack]

Can't find anywhere to order this or preorder yet but would love to have one!

[@philippicphilodox888]

The 432/632 seems like the hipster gun without the rarity. And that's a good thing.

[@82lowe36id]

Looks like these are some great features for the j-frame!

[@thetrentpete]

Please don’t stop making these. It’s such a cool concept and it fixes the only reasons I wouldn’t want the original 442

[@jackclancy5747]

I hope S&W produces enough of them to meet demand. It will be a big seller.

[@LarrysLibrary]

Looks great. Interesting though they regulated the .38's sights for a round that has been unavailable for about 3 years now! Maybe get Speer to start supplying some of those 135 loads to retail?

[@A4Blue-m7n]

You guys are killing it. Between this and the Gen 1 Glock you guys did I have been truly spoiled. I gotta get one of these.

[@JSuttersFort]

Wow, Centennial J’s remain a favorite. These look good. I’ll have to talk with my local store.

[@MarcoFromTropoja]

5:25 now I know why there’s always dings and dents on new smith and Wesson revolvers. They just toss them into a bin with other parts.

[@n2cycles]

Love the grips. My 360 needs these for the 357 mag given the weight is only 11oz. I wish they had put the 327 federal mag and I’d rush out to buy one.

[@charleslee4528]

Yes! I've used a 642 as my NPE gun for 16 years, I will have at least one of these.

[@Godscaliber1911]

Wish more companies asked Darryl and Bryan what revolver models to make.

[@Brad-ic4bp]

Love at first sight. Only decision for me is which flavor of .32 revolver - black or gray.

[@coalgunsandfreedom6891]

Excellent firearm. Picked one up a couple weeks ago in 38. Love the sights, grip and trigger.

[@bigghoss762]

YES! I tried a 442 a while back but sold it because I couldn't find any grips that added trigger reach without extending below the grip frame and making the gun up-pocketable. I've also been wanting good sights for a long time. This really is the ultimate snubby revolver. Now do it in a K-frame.

[@LA_Commander]

Hogue makes some really great grips for these guns. The longer one is the easiest to shoot. The middle sized one is slightly smaller but still good. The small one which I don't recommend is about the same size as factory

[@toolman2364]

I fondled a new 442uc at my local FFL today. I will say that the sights, trigger, and grips are perfect. However, I passed on it. The cylinder lockup and the barrel/cylinder gap were as bad or worse than my Ruger LCR. My 340 M&P is just about perfect. The cylinder locks up tight when the trigger is pulled, and the cylinder gap is only .005. I would prefer to just get another 340 M&P.

[@rebel-yellenterprises1479]

About time! Septuagenarian here…arthritic hands now and the 32 H&R is perfect for me. This is my dream CCW revolver, ticks all my boxes, especially the lightweight alloy frame and night sights. Trying to get one right now through my LGS, maybe then a second one as a backup a bit later. I am well into the J-Frame platform for years in four calibers (22LR, 22WMR, 38 Spl, 357 mag) and this will be the fifth caliber (32 H&R). Two of these would be welcome additions.

[@cjr4286]

The hammer pin snapped right off after only two years of occassional range days in my standard Model 642, which was disappointing. That's why they are going back to pressed pins in the revolver design -- the way it used to be done, but now with titanium pins.

[@paulcardone5604]

Do you think S&W will consider this revolver in 327 Fed. Mag?

[@Bobbertj7335]

I've been carrying my smith 642 performance for years great gun . I really want this upgraded one

[@ShelbyJamesYTShow]

I hope this means you all will eventually do a 327 Federal Magnum revolver with a stainless steel frame.

[@SDGlock23]

Very good, the only thing missing is moonclip compatibility.

[@sempertalis1230]

Excellent❤, I love my 327 Smith but at times it is a tad to large and not a deep conceal carry. Your take on the J frame looks to me as the answer to my demand for a modernized revolver approach. I will definetly look more closely into it.

[@Puddin127]

This is freaking awesome.

[@jamesdavis7650]

I just picked up one in .38 Special, it is sweet! Love the grip and sights!

[@glockky1]

Would love to see these in 32 H&R or 32 long

[@caymanschaefer2058]

Did you watch the video?

[@gtcam723]

I’d love to see a 3” version, maybe borrowing the Mdl 60 Pro Series beveled underlug. Ya know, being able to have input on something like this would actually probably bring me back into the industry.

[@logangodofcandy]

That would be excellent. I'd buy it

[@granitejeepc3651]

ive carried a 638 since 88. i have 638-3 with full length ejector. points and conceal better then 2 CT green laser, trigger job and about 7k rounds plus 20k dry fires i would love 8 shot .22 magnum in 638...i love still able do a single action shot

[@Vladpryde]

I bought a new 642PC no-lock back in May last year, and I'm having to send it in (when I get around to it...print-and-ship office is 35 miles away) to S&W to have some defects in the cylinder either fixed, or a new cylinder installed. Things which shouldn't be happening to a Performance Center gun. I wish Lipsey's had released this sooner....I would have foregone the PC model and bought this one instead.

[@ricjona1069]

For those that state 5 rounds is not enough, carry 2. New York reload and redundancy and can share one if needed. Carry speed strips for additional rounds. Carry a 3rd in high threat situations.

[@myfd242]

When will the 32 H&R magnum be available? Didnt see them on the website

[@LipseysGuns]

Looking like a late February delivery.

[@Kelly-oq9nh]

@@LipseysGunsI’m in.

[@southfork67]

I’m in but if they offer it in 357 later I’ll be getting one of those. A M&P 360 and M&P 340 with these features would truly be the ultimate.

[@upnorth5465]

Need this in a 357 mag! I'd buy one in a heartbeat if you gave the model 60 this same makeover!

[@user-ex9zm7bg3x]

The 340PD's sight is pinned and can be replaced with a Trijicon

[@mrchavez1967]

Love to have the 32 H&R mag in stainless, but they are too expensive at this time.

[@Johnnyjonas274]

Love those those sights! Wish my 642 had them

[@gregh3248]

Love my 640 Pro. The best J frame made by S&W

[@flsuccesscoach]

Love it! Been looking for a lightweight revolver in .38 special as a back-up gun. Where can I get one of these?

[@duck-n-cover477]

Duh, because revolvers are awesome carry pistols! I prefer the K frames, but this sounds well-thought. I think my clients will like these like they do the latest Magnum K frames.

[@b.g.4277]

They should add 327 mag, can shoot anything the 32 HH can. My other wish would be a 30 SC version that used moon clips. Higher capacity and would be much cheaper than 32 HH, at least from prices I see online.

[@edstringer1138]

I millied my 642 sights down to add a big dot sight , better sights are awesome not having to do triggerwork is another bonus which I have also done

[@gunguy8348]

Looks good but Kimber k6s is the winner here offers everything with 6 rounds 38+p. I own the 340 and 638 so I’m a smith guy but not waiting forever for 6 round j frame.

[@logangodofcandy]

These are smaller lighter guns. The comparison would be the k6 aluminum in 38, which has trash sights. Same price range. Similar weight. I'll take the Kimber over a steel j frame, but Smith has the better aluminum gun with this version

[@ammoiscurrency5706]

Been looking at a carry gun for my wife. I cant wait to se this on the shelf!!!

[@paulbingville6485]

Look great. I prefer Altamont Bateleur style grips, but that's an easy fix. Everything else is spot on. Do wish you, or someone, would consider doing a similar upgrade to the 638, that would be my true ultimate carry J frame.

[@ericthered7226]

I think you're the first person I've heard say that they like Alamont grips.

[@paulbingville6485]

@@ericthered7226 They look good, feel good, and work well for me. But I'd consider any birdshead style grips that allows a full three finger grip a major improvement over boot style grips on a J-frame.

[@snugswashere6504]

I’ve been looking for my first J frame and this may be the one for me.

[@mofozi]

I will be paying close attention to Lipsey from now on ❤

[@813GC]

When are these going out to the public??? I need one.

[@BishopBlast]

i dont have too many revolvers but loved this content thanks. (need to add more to my collection)

[@crushthequarter6863]

Did I miss when they were going to be available?

[@robgarrett1781]

Shipping in late February

[@gallagherw3]

Great info and considerations from your experience. Thank you for sharing.

[@logangodofcandy]

I always wanted an m&p 340. Never found one in stock

[@happyamerican3235]

Gunbroker website or have your local shop order it. They are available. $900

[@TomRiddle-ww5on]

LIPSEY'S , how about a 3inch model 637. Or get s&w to remake there model 12 .... I really like these new carry models with sights !! Well done!!

[@1patrioticscots]

Great looking gun. Love my Kimber K6xs, though. You really can't go wrong with either.

[@guitrich]

what's the price?

[@LipseysGuns]

MSRP will be $759, priced between standard 642 and M&P 340.

[@G1FREAKZ]

Nice but with that price id rather get the smith 686 😳🤣✌️🍺🇺🇸

[@RobMiller-w3y]

Will it fit standard j frame holsters?

[@G1FREAKZ]

@@RobMiller-w3y i will pocket carry the 686 😳🤣

[@logangodofcandy]

All j frames fit standard gets

[@MrLanternland]

Great that u r bringing back the .32! No Hillary holes , right,?

[@Powernoodle_]

Will these be made in sufficient numbers to meet the demand? One KZbinr said there would be 1,000 in each flavor. Thanks.

[@woodroez]

They are going to make these things for as long as they are going to sell. You or I might miss out on the first wave of them but it sounds like S&W will be making them for a long time unless they somehow become a market flop.

[@Jordant106_]

I was just looking into getting A 642 and man I’m glad I came across yall on TFB TV definitely gotta get me one from Lipseys no doubt 🔥🔥

[@richardlong8736]

When do these ship? 32 H&R is great but I'd still rather this in a 327.

[@TheOfficialCaseMade]

I really hope these catch on! I would LOVE to see a 3 inch 327 Federal Magnum with these same exact upgrades with a shrouded or exposed hammer! That might be the ultimate do-it-all revolver; carry, hiking, and kit gun. I understand Lipsey's has an exclusive LCRX that fits that bill, but man they're hard to come by.

[@paladin4570]

Ordered a 642UC today. Can’t hardly wait to get it.

[@TheOfficialCaseMade]

This is literally a pistol that has ALL the upgrades you could want, from the factory! What an awesome job you guys have done.

[@Pmedic605]

Funny, can't find it on your website. 🤔🙄