LOCKED UP: Classic Farm Truck Rescued After 30 Years | 1947 International KB3 | RESTORED

[@pitTmancenter112]

From a financial standpoint, it’s hard to say whether or not replacing the valves is the right thing to do. From the viewpoint of those watching the video, most, including me, want to see that old original engine run. I like you guys. You don’t try to be slick or act cool - you are very relatable. Like most of us watching, you plow ahead whether or not it makes sense. Keep doing what you’ve been doing. It works. You work well together and you’re interesting to watch. Love all of those old trucks you found in that field.

[@daleradder7354]

I would of pulled the engine out after finding out that the motor was seized up. Much easier to work on. But that's just me.

[@kevinhickman6368]

I’ve never seen two guys work so hard at trying to save a engine and I praise both of you for such determination,hope to see this engine run again and be a good one with all the hard work you both have already have put into it!! May god bless you both!! Love the channel guys,keep up the good work!!

[@TheAtstube]

I think I saw it on another episode, it was a truck as well, wound up getting the locked-up pistons moving, I think the Izetta livestream was a very difficult one

[@robertgorman5622]

I have extreme confidence in y'all getting that Ole boy running 😊

[@VitosSupplyCo]

As an owner of a 70’ International 1100 I’m all for getting those valves and making this ol girl run again! Internationals are special trucks you see Ford’s and Chevys all over marketplace but these trucks are much more rare and have a lot of character. I love how original this truck is the period respray is so awesome and how it wore in! I’d get it running reliably and leave it in its work clothes as a survivor!

[@teresarudd4811]

Awesome video thank you for producing a car video that doesn’t have any bad language. I’m praying for you and your Dad and family. You keep up the good work. You are being a bright light for Jesus in a dark world. I’m thankful that one day I got Restored by the Lord when I surrender my life to him. Have a blessed weekend

[@RESTORED-HOPE]

We're glad you enjoyed the video. Have a blessed weekend as well!

[@abdalasami6596]

These old trucks, despite the wear and tear of time, are still strong, and modern cars would stop for a period of time and would not revive again. Thank you, I enjoyed watching

[@johnvonsauers8867]

well, I think you guys did a great job freeing up that engine, this remines me of the old days when I worked on my cars with all my tools out of my box laying on the ground next to me, yes I did hit the like button👍👍👍👍

[@donaldhelgeson6769]

Love how you all work together. Can’t wait to see this up and running

[@greggsvintageworkshop8974]

You need to get you a flat head valve spring compressor and keeper installer, it makes it so much easier. Also, the guides go in from the top. They make a valve seat grinding tool that uses the guide to keep the stone centered and 90 degrees to the block. I've replaced guides and ground the seats with the engine in place. It's just a matter of finding the right tools which do exist. Great job getting it broken loose. I was having my doubts!

[@jayjones6904]

You're blessed to be able to do this together

[@Vitico222]

So blessed.

[@dylanlewis3666]

I've said this myself, many times.

[@GameOpsDevStyle]

I've got such a soft spot for these old IH trucks!

[@ulpilotrmh]

You guys have to get this good looking truck running again. Can't waite to see you two do it.

[@IanCampbell-sh3si]

its in good shape hey

[@charliecatron5367]

Y'all got this. Awesome job. Can't wait to see more on this one.

[@jimrobin98]

KZbin should have a yearly competition for camera people! Christian does one hell of a job working those cameras! I think the older she gets the more professional she will be! She has my vote as best camera person on KZbin today! Keep up the good work!

[@jesterr7133]

I don't know why, but I have a thing for Internationals. I like every model. They just have a neat look to them.

[@thomaswermager1819]

Persistence will prevail. Keep at it gentlemen, you’ll get her running! She’s a good looking truck! Thank you for the great content!

[@robertmayer8455]

Thanks!

[@terryeustice5399]

Hey Lance and Wyatt you picked the one that looked the best. I thought that to. But, turned into a really turned into a mess. Hard to believe. Great Video giving it all you got. Thank you for sharing. 💯💕👊👍

[@2coolwheels139]

Looking forward to the next episode. Love that old International, it would sure be nice to hear it run again.

[@jamesroets800]

Good to see Christian in the episode - great cinema work as usual.

[@jeremyking6146]

it's so great watching you 2 fellas work on vehicles, bring em back to life and challenges along the way, you guys are so lucky to have such an awesome relationship and work as a team as well as you do. bless you both.

[@ronbuck6887]

When you apply heat, get it hot and melt some sealing wax on top of bolt and bolt or nut will come off so much easier and normally not break off. Sealing wax works really good everytime!

[@westerntraveler2835]

I absolutely love and marvel at your determination! It is a rare talent you both have; hope you're successful in getting the needed parts, (Better yet, take the engine to the local International dealer for a complete rebuild!) HA!

[@rickypevey7751]

Love that body style that old truck

[@philiphereford5657]

The camera work on your channel is excellent, one of the best on KZbin.

[@michaelrutland7861]

Awesome job y’all!! With that much water in it there just isn’t quick way other than what you did. Keep up the great jobs!!

[@JadeDragon407]

Been a while since I checked in on y'all. Still fighting engines, I see. Really neat truck; I hope we see more on it in the future. Have a great weekend, and thanks for you guys' great content as always.

[@randysmither-si3jz]

Really liked this video and would love to see you get this truck running

[@yostasean]

Wow you and pops put in the work on this one definitely waiting on future episodes of this one! Appreciate all the hard work and the videos

[@erwinarnold8214]

fabulous truck!!!!!

[@rickmeisch643]

Nice truck, I’ve got a 1953 truck that’s the same color red under the hood and exterior is green. Mine is a 1 1/2 ton truck with dual lies and flathead. Mine ran good till we just didn’t have work for it back in 1982. My truck is engine froze and stuck in a gear.

[@MarvinHowell-k4u]

Another great video. It's really tough to find parts for old flat heads. Can't wait to see how this comes out. ❤

[@jesterr7133]

This is a nice looking truck. It was a nice find. It's a bummer that all of the glass is delaminated though.

[@alexanderparkhill1019]

I am so happy to see you're back working on old engines I will pray for you all God bless from France 😊🎉

[@dansimmons1964]

Looks like a couple of shade tree mechanics hard at work! 😎

[@roypowell3450]

Great to see you back and confident you will get this running. Thanks as always, super filming Christian as always... 👍

[@francoisbouchard602]

Nice job sir Nice truck Nice show sir 😃👏👏👏👏👍👍👍👍

[@حسنيامين-ه5ص]

I have been waiting impatiently for any video uploaded by this wonderful channel. I love you all. You are truly cooperative and understanding. It is a happy family. God willing, I will visit you as soon as possible. Greetings to you from Yemen. ❤

[@rianani9552]

Saya orang Indonesia, sangat menyukai vidio2 anda..

[@remingtoncarrelics4299]

Get yourself a lathe. Go to a junkyard and buy some bigger diameter valves for a different engine and turn your own valves from here on out. Love the content, keep up the good work and stay blessed

[@dylanlewis3666]

I wish, amongst other things, I had a fraction of your mechanical abilities. I changed the oil & filter and drained the radiator and replaced the hoses on my '69 Valiant, and it took hours longer than it should've, and I still have cuts and scrapes all over my hands a week after!

[@ReviveNDrivee]

I’m ready for this upload , yall are a big inspiration

[@davidk6271]

Good effort. Looking forward to the conclusion.

[@speedybuggy1677]

Your videos are very best 👍👍👍👍👍 I give you five stars ⭐⭐⭐⭐⭐ love to see more of you two working on old school vehicles

[@caroled5734]

MamaCard here. What is the things I love about? You guys is that you keep trying where everyone else would’ve just given up.

[@coydad]

I like the backround music it's not that electronic crap that so many others use

[@danieloscarvillalon3856]

Hermoso proyecto!!! Muy original!!!! Gracias por compartir abrazo grande 🇦🇷

[@alanstant9356]

Some things are meant to be guys. You gave it your all and that's all that matters. God bless you guys and what you do.

[@Sheldon867]

Awesome video as always lance,wyatt n Kristen thanx for all ur videos. Take care all of u Sheldon from the uk

[@Jimmiburn]

Beautiful setting for a beauty of a truck ❤

[@55desotomine]

It's a very simple engine, you've got it out already, take it apart and clean everything right. It doesn't have a timing chain, it's gear to gear with the cam running backwards. At minimum, pull the pan and clean it out, and clean off the rather unique strainer.

[@jamescaneda9515]

I’m the second owner of a 1951 L110. Now that I’m retired, I’m working on it now. That KB3 looks pretty good and solid. Good luck.

[@brycechessum4684]

I had an AL 110 flatdeck Aussie built bloody good wagon bags of torque, did rings and bearings in frame, that perked it up some.

[@zachmcdaniel8926]

Good job, guys & lady on the camera. Thanks for another great video. God bless

[@dipe277]

Wyatt beating on the pistons, Lance laying on the breaker bar....."So easy a caveman could do it"

[@AndrewHCann]

Excellent Video RESTORE CREW Wyatt :) , Lance :) , Christian :) yes think that motor and transmission be make go after get parts you need ! Also would top transmission up fluid in to plus Clutch plate plus parts before start up and check differential fluid axle plus brakes too!

[@krisheidbrier7511]

I would spend some time on the interwebs researching these old flatheads. I’m sure there is a chat forum somewhere out there that could be a gold mine of information. Keep up the good work gentlemen!

[@darynwilson8330]

Your dedication to your craft is inspiring, another amazing video as always 😊

[@williammurch7972]

Looking forward to seeing second part of this

[@RoninDosho]

I enjoyed this one. It reminded me of my own adventures tearing engines down over my lifetime. No matter what the outcome is, for this old flathead, I'd like to see this truck running, and driving.

[@jamesmallinger9555]

God Bless you all and your family ❤Love Jim J&R mobile service and God Bless y'all and your critters

[@LindaDyer-b9u]

Another great show. Sorry you both have had so much trouble. We can’t figure out how all the water got in there. Could it have been under some water for a bit and it wasn’t drained out ? Well you two will sore it out. I love the old truck.

[@BernieJr89]

I know it's not the idea behind this, but it's so painful to watch ideally not grabbing a hotrod 302 350 (dealers choice) and have that truck runnin down the road in a few hours. The patience yall have is tremendous

[@haroldkuykendall9078]

You Guys are Restores!!!❤

[@novanut1964]

good video, alot of work, cant wait to hear it run

[@jodycarter2271]

Great work guys but I really don't get how so much water could have gotten into the carb it wasn't like the truck sat for 30 years with no hood on it that I would understand great work 👍👍👍👍👍👋👋👋

[@CarolinaWheezer]

Sweet looking truck you guys ortta turn this into a parts getter slash tow rig for your field and barn finds 🤔 just a thought ❤ love the videos keep it up you guys ,God bless🙏

[@abelardocastillo6683]

Trucks in real good shape, save it

[@shanewright6958]

Another good one 👍👍

[@pedroescobedo9946]

Hi Lance I love to watch your videos

[@abioduntijesuni]

Well done guys we will like to see and be into whatever you guy do, not looking at you guys most of the time. Best of luck

[@petremincu6309]

❤SALUT PRIETENI. FELICITARI FRUMOS,😊 NUMAI BINE ȘI SPOR LA TREABA.DRĂGUȚ.

[@DanielBoutwell-o8f]

You two are amazing i wouldn't of had the patience to get it unstuck

[@davidrudd9846]

Bare Knuckle Binder from Austin. Old International Trucks is his specialty He has a you tube channel

[@Bandit-e3v]

You guys are in my prayers.

[@Udo-z8s]

Greetings from Brandenburg 🇩🇪👍

[@brettboggs8800]

I admire your patience, guys.

[@Ricardoteh345rd]

Lance/wyatt/Christian with restored/turning rust along with Dustin from jennings motorsports have to the best channels on KZbin they call can take what is basically a rusty crusty boat anchor into a running engine absolutely awsome videos as always

[@davidrudd9846]

Try Bare Knuckle Binder He has a youtube channel. He is a walking Encyclopedia on old International Trucks

[@Ricardoteh345rd]

Also parker from backyard barn finds boggles the mind what he knows as well

[@davidrudd9846]

@@Ricardoteh345rdI will check him out

[@johnlundberg5705]

The front cowl and fenders come off as a unit. At the point you are at it means removing 6 bolts - two each on the running boards and two under the radiator. You're doing this the hard way

[@ladypurple6919]

There is a valve spring tool for flat head engine's. If you are going to be working on these flat head engine's you might want to get that tool. International trucks of that age are really hard to come by.

[@stephenmctaggart8400]

Sweet looking truck. Another good find lads.

[@wolfganghoferer773]

💗 The best on KZbin

[@johnfarish9305]

Awesome old truck know you guys can do it

[@jcenciso9]

Awesome find!! I may have to do some IH hunting in KS. I’m very surprised to see how good of shape that grill is in- they’re usually bent up or missing.

[@youxkio]

Now this is awesome. There are several ways to research valves or whatever item on the internet. One is looking for what vehicle model it belongs to. The other is using the sizes. Sure, it may not be from the car model but it may be fully compatible.

[@TroubadourJuggernaut]

Awesome content and an amazing truck !! Hope to see part 3

[@russellhanlin9510]

I've always enjoyed your videos

[@OMT-pk7ce]

Good job 👍 ❤

[@carolerodeghiero8157]

❤love the work.

[@vborg001]

Awesome video!!👍👍

[@tedkopp8842]

54:08 That's when, for me, the spring would go SPROOOOINGGG and go flying out into the tall grass.

[@vicferrari9380]

A+ on your determination! Whats your goal with this truck?

[@67Stang]

Always fun to see your adventures. Looking forward to seeing what happens. You went further than I would have. You might want to reachout to Morkski. He seems to work on a lot of flat heads and might have some used valves.

[@robertparker3172]

Get ahold of the guys at The Binder Boneyard. They’ll set you up.

[@TundeEszlari]

Amazing premier.😊

[@dannylinc6247]

That Trucks brother lived with us for years. He was called Red Fred and he was also green. 6 volt system, converted to 12 so gauges didn't work. He was sold so dad could do a different project not half as good looking as ol Red Fred. As pretty as he was, the neighbors didn't appreciate him. Then we had the blue moose and the grey goose. traded Fred for two newer models easier to get parts for. I told dad that was dumb, but he was more practical.

[@kodagodalakmal2598]

I wating fo this video part 2😊

[@ThomasPrior-wv6zn]

thanks for this vid , iam at the point . of trying to get number 2 and 3 pistons free, on my 1950 riley rme , engines out pistons have moved down a few inches , while hitting them with a post driver , but not much . going to heat up pistons in the block , then remove the journalls , after engins turned up side down at 900 pounds an inch . can only get presure from up side down car was last on the road in 1973 barn find rust . rust , and more rust and years of dirt , but i new before i bought her she will be along term project love your aproach to work just hope the 2 bores are not in a bad way t y

[@Getouttahere78]

My dad had a 1946 model. I learned to drive in that 😁

[@kennyrichard2971]

Awesome video guys

[@timothymallory4485]

Appreciate that one good potential good work