Low Hot Water Pressure And Low Hot Water Temperature - Plumbdog Plumbing Perth

[@patelpratik4051]

Thank you mate. I saw this video and change my themostate valve and my hot water back to normal what I have previous and save couple of dollars. Thank you again

[@Sange4499]

solid breakdown mate, learnt more from your video than anything else on hot water heaters and why the hell i should definitely not give it a crack myself

[@ryanjarrelladams]

NONE OF THE DIY PLUMBING FIXES ON KZbin SAID THIS: turn off the main water to your home (if you have one), turn on the closest faucet to the main water source, set that faucet to cold, let all of the water drain, set that faucet back to hot, wait 10 minutes, with the faucet still on and set to warm, turn back on the main water line to the home. Fixed my airlock problem, maybe it can fix yours

[@pauladams4890]

Thanks mate… I had a grub of a plumber try to scam me out of my dux airoheat. Told me tank was leaking (no signs of leaking) & that he was gonna take it away & fit an electric. I’ve fixed it myself…& discovered he fit a brand new sacrificial anode to a tank that’s destined for the tip??? I fit a new controller & it’s working again. He even turned this valve way down to stop any flow if I fixed it.

[@JayDee-xj9lu]

Great video , thanks. I have just moved in to a 12 year old house, and the pressure is low and it's scolding hot. looked at the tempering valve and some idiot had it screwed out all the way. I've adjusted it, but the pressure still seems low. But i was going to check the anode. But now I'm convinced to replace the anode and tempering valve and the safety valves and flush the whole system. I need to be careful as it's a rheem with a solar booster.

[@affordableplumbingandelect2119]

Both the Cold expansion valve and the hot water safety valve are also meant to be replaced every 5 years as recommended by the manufacturer. Also with the "Temp" valve is that the old anode residue starts blocking them up. That's why you need to flush them out.

[@Naughts.and.Crosses]

Great work Pbum Doggy... 👍

[@tonycanniffe2360]

Had low hot water pressure immediately after the council turned off the water in the street to maintain the pipes in a 30 year old subdivision. We have a regular electric hws with the mixer valve. Pressure release valve had nothin. I TURNED up the cold water intake valve and opened the release valve. CLOSED THE RELEASE VALVE. And hot water pressure returned (I had tried this cold water intake release before to no effect- seemed to need more intake oomph)

[@dryduststorm]

I wonder if the Tempering Valve (orange cap) can deteriorate and cause water hammer. We have developed water hammer and cannot pinpoint a location of the source except it louder near the Stellar 3 system and the Tempering valve feels like it is shuddering with the water hammer. The hammer is caused by mixer tap downstairs and not caused by any other tap. Just love the practical and technical videos - outstanding.

[@PlumbdogPlumbingPerth]

I doubt its the tempering valve, will most likely be an isolation valve or tap washer somewhere. If your in Perth give us a call 1300884146

[@dryduststorm]

​@@PlumbdogPlumbingPerth Hi Plumbdog. I am in freezing Canberra otherwise I would definitely buy your time if we were in Perth. Cheers to you and family. Steve M

[@darren7020]

​@@PlumbdogPlumbingPerth shoutout to you for your videos. I live in Brisbane and no one has come close to your videos. I appreciate you mate.

[@PlumbdogPlumbingPerth]

@@darren7020 thankyou 😁

[@bruceseamer]

Very useful video. Thanks

[@mannaklm]

very helpful and well explained, thank you

[@upuldi]

Great vid. Thank you.

[@VAL-ts2nf]

Thanks for Richard's video. It is very good explanation. May be I have the same problem with my Dux 170L prodigy 5. Several months ago, when I open hot water tap always starting with popping sound. From last week suddenly my water is not hot and Pilot lit OFF. I try to start again and main burner working only several minutes and OFF together with pilot lit. I thought maybe the thermocouple was problem. I have changed it. The main burner was working more longer during I opened hot water tap continuously, but the temperature of water was not hot as before. On the other hand popping sound on the tank making noise. I opened Hot water Tap and also several time to drain the water from the tank by release both valve Top an Bottom on the tank. The noise was reducing, many sediments I found under Hot Water Tap. I was waiting until more than 90 minutes, water temperature was slightly increase but I think less than 40 degree Celsius(I don't have thermometer). Now the problem if I open Hot Water Tap, there is no hot water because Pilot Lit still OFF( that's why the main burner also OFF). Is it problem of Tempering Valve and should be done Major Service of the Tank same as your video which in Thornlie and Burswood ? Could you give a quote for me, please via my email [e-mail]. Thank you very much

[@PlumbdogPlumbingPerth]

Pls contact us via our website and make a booking www.plumbdog.com.au

[@denisvincent3249]

Great video

[@brntway944]

Great vid learnt a lot

[@alistairbushney6578]

Thanks mate

[@3rdrockfromthesun23]

good one mate. thanks for the tip. good vid

[@PlumbdogPlumbingPerth]

Thanks mate, your welcome!

[@itsthemetho]

Why don't you have flexible annode rods that are avaliable? Would seem to be a very common solution rather than the old school move the tank?

[@Swenser]

Some say best to leave the anode alone if left too long. Do you agree. Also flushing may cause more problems.???

[@patelpratik4051]

Hi mate. I have same kind of gas heater and same issues really helpful for me. I want alos know that when i turn of kitchen tap its makes hammering noise what is the issues for that? Thanks in advance

[@jaycohobart9662]

I've just had my tank replaced with new tempering valve(yellow cap) problem I have is the temp is colder in the upstairs taps where you don't even need to mix cold water into it, nowhere near hot enough for washing up etc

[@PlumbdogPlumbingPerth]

Is the temperature set at the taps to compensate for heat loss?

[@jaycohobart9662]

@@PlumbdogPlumbingPerth we have just found out as the upstairs bathroom is being renovated with mixer taps it is causing the change of temperature through the system.🤦🏻‍♂️

[@kallan2255]

Have you considered using a Bluetooth or RF thermometer like people use for BBQs so you can remotely read the tap temps?

[@mvfc7637]

50 degrees isn’t hot enough, bloody nanny state Australia.

[@PlumbdogPlumbingPerth]

It actually is hot enough if its 50 degrees at the tap basins/showers etc. Kitchen sinks/laundrys can be hotter if the plumbers arent too lazy running seperate feeds…

[@mvfc7637]

@@PlumbdogPlumbingPerth had a plumber tell me my hot water was hotter than in most homes he visited and unfortunately had to replace my 11 year old Vulcan unit the other day with a second hand Aquamax 390, water isn’t as hot and it doesn’t deliver hot water as quickky to the taps compared to the old unit, going to have to adjust the cold water mixing valve to the minimum, but that will only increae the temp by 5c…..

[@dancruz4635]

Dux is shit. Don’t last long and always have probs with it. Now we got the compulsory tempering valve it’s double shit. I’m going back to heating a tub of water with an open fire. Lets see the government regulate that.

[@mvfc7637]

@@dancruz4635 unironically I was thinking that when considering cleaning my bbq, you need really hot water to be able to loosen up the grease that builds up and then to rinse the cleaner from the insides, can’t see the current hot water system producing water which is hot enough and I entertained heating some water on the oven and using that instead!!

[@rayseal9157]

Hi there what's the difference between avg orange top and the tomson. About $100 dearer here in sa{Reece} our kitchen tap is Luke warm no need for cold water. The shower temp is good. Any plumber you know northern suburbs in adelaide. Cheers

[@ParasTube]

I had a Rheem Stella tempering valve replace but now the hot water is really hot but only for a short time, the water in the morning doesn’t get hot enough and once in a while the pressure is pretty hard until I turn the tap off and on again. Do you have any videos on these issues? Also thanks for the quality info 🙏🏾

[@boondiggaz]

Gday mate, great video cheers. Is that the same for a gas set up?

[@xx3868]

Hi, i have hot water that runs good pressure then less then good again over weeks or months and i check the cold water tap at sink when this happens and get strong flow. Have the gas temp knob to 4 out of 5 but the mixing value has a turn valve from 1 to 5 and is set in the middle and tried to turn it but seems stuck so corroded and partially blocked? Is mixing valve faulty and causing temp to not be that hot then hotter other times. I got the machine to light and boil and then had shower and was almost all hot water and just tiny bit of cold so that cant be right?

[@vipa1973]

Just like I thought should work except it doesn't. Mine has an orange cap with the triangular indentation and wouldn't turn the thing at all. Gave it some lubricant to loosen up, hope it will help. I watched the service guy "adjusting " it up with great force and a plier which damaged the soft brass triangle knob. Now the water is far too hot and would like to turn down by 1 degree. What do you suggest me to do if it remains stiff and won't turn? The serviceman wants to charge an other service fee just to come from 800m and turn the knob.

[@nickkidman1594]

Do u know what can be wrong if my gas water heater whistle about few minutes when shower at night at this season in NSW ?

[@aussiegruber86]

I have had pressure issues ever since I had a tamper valve installed, and the bloody water temp in the shower is nearly impossible to get right

[@PlumbdogPlumbingPerth]

If your in Perth we can fix it, no worries!!

[@aussiegruber86]

@@PlumbdogPlumbingPerth nope other side of the country lol

[@pauldoddsp150]

Which direction to increase an AVG brand temp valve from 36 degrees to 48-50, clockwise or anti?

[@Amayzingone]

Can the tempering valve be installed either way or there there a specific hot water connection and cold water connection? Could not see any such markings on the value you installed.

[@timothyschulz4730]

Can these valves be installed in any oritation or not?

[@rollyae82]

Thanks my friend! now I know how to turn up my new heat pump temp as it wasn't hot enough... :) whats your thoughts on a heat pump running on peak power during the day? I was surprised the guy had changed the meter box set up from off peak.

[@PlumbdogPlumbingPerth]

Your welcome. Sorry i dont have opinions on heat-pumps, im a gas man 😁

[@christybambi]

hey where do you get the tool to adjust the valve as mine is missing?

[@PlumbdogPlumbingPerth]

Hey they come with new valves, not sure if you can buy them separately. Maybe ask Reece Plumbing supplies.

[@trixietheopawslife8232]

How often do you have to do service on hot water system? cheers.

[@PlumbdogPlumbingPerth]

Minor service every two years, major service every 4.

[@stephenc4161]

Burnt daily? you heard of gloves

[@PlumbdogPlumbingPerth]

Gloves?....no we havn't - what are they?

[@perthsteve5032]

What sort of costs are we looking at generally speaking? I reckon I have the exact same issues you have described in this video

[@PlumbdogPlumbingPerth]

Pls go to www.plumbdog.com.au and contact us there 😁

[@erikligmail]

Hi mate, Can you let me know what is the minimum temperature a tempering valve can be set to? Can it be set to somewhere between 35~40c?

[@PlumbdogPlumbingPerth]

It depends on the temperature of the hot water to be cooled. 42 degrees is for schools so doable.

[@Gaspar314]

Aren’t you required to set the temperature to 60 degrees to prevent legionella growth in the pipes?

[@fatsnorkel]

@@Gaspar314 You can have the temperature control inside the actual unit on the highest setting when you install a tempering valve but then you adjust the actual tempering valve to get 50 degrees.Eg- On the Aquamax units you could have the temperature control on 5 (75 degrees) then adjust tempering valve to 50 degrees.

[@KDddd203]

Very bad installation. Original plumber should have installed a shut off valve at cold feed into cylinder. That way you wouldn’t have gotten burnt