Fix Those Common Resin 3D Printing Fails! Easy Build Plate Leveling Tips You Need.

[@oleww50]

Probably one of the best videos I’ve seen on issues and how to fix them! 👏

[@Lychee3d]

Thanks so much!

[@luis2864]

this helped a lot. Very well explained, thanks a lot

[@Lychee3d]

What about you? Which leveling fail has caused the most print nightmares in your experience? Share your struggles (and tips!) in the comments below. ➡ The common issues addressed at 7:04 in the video originated from our Discord community. If you're still facing challenges or have questions, join our Discord and connect with other printing enthusiasts: discord.gg/NGDDTgY

[@matheusluvison1]

So much great information!!! Thank you very much, from a noob perspective, it's so hard to troubleshoot with the sea of information online and many of the things you said make a lot of sense.

[@Lychee3d]

You're welcome, thanks for your comment!

[@mikiauto73]

Derek is the best! You guys are lucky he is on your team! Thank you!

[@J3DTech]

Thank you! ❤

[@tonithaye251]

Great video and so informative! Thank you.

[@paulhaban6228]

Wow. That is a well explained great video. I appreciate all the visual examples. Thank you!

[@Lychee3d]

Thanks !

[@TaMiCGarGit]

Great stuff!!!

[@Lychee3d]

Thanks!

[@JerryBWagoner]

Great video! Thank you. I'm going to have to figure out how to get that tool printed.

[@albertogranadosbiz]

Great video. Thank you 🙏

[@stevef6523]

Great diagnosis video, feel like a bit more of a focus on what to do to fix the problems could be helpful. Thanks

[@georgemichailidis139]

How do I find the the right amount of transition layers and bottom layers?

[@superslacker87]

Where can we get the tool shown at 1:29?

[@Lychee3d]

Link is in the description :)

[@okashiiookami3305]

@@Lychee3d its not working :( both of them

[@johngoddard7390]

Awesome thank you, does that also cause the splitting mid print??

[@FabienModrono]

5:02 where is this other video ? I am in this exact case 😂

[@Lychee3d]

It's coming! We have so many things to talk about :D

[@FrankMontano]

LEVEL UP YOUR PRINTING GAME!!!! 👏

[@88RunnerBlade]

very well explained. I have M7 Pro and I do see a bit of light flashing through the middle of the build plate. It is a bit concave. So you are saying that is normal? It doesn't need to be completely flat?

[@AG-x4r]

I have the non-pro M7 for a couple of days now and i'm having adhesion issues on the front center of the plate while printing. Also check the flatness with a ruler and it is indeed not 100% flat. But, having that said; could this also be a leveling issue of z-offset problem? I havent leveled the plate manually though since it should be factory leveled, so i will test this soon. Any tips are welcome!

[@Genorockz]

Do you have a link to the 5 leveling print files and the device that applies even pressure to the build plate?

[@Lychee3d]

Link is in the description :)

[@KarisonN]

Can you point me in a right direction? I have Anycubic photon mono 4, just out of the box, i've leveled the plate, i've set recomended parameters for the resin, but the rafts on my prints are not sticking well to the front middle part of the plate. I've checked with the light method and didn't see any noticable gaps. What can cause such problem?

[@Lychee3d]

You can join our discord and post there your issues, our team, derek and the whole community will help you! :)

[@LayerZeroDesign]

also the large plate leveling tool 404's. Where can we find that? Edit - I found it

[@LOB02398]

en una saturn 4 ultra con autonivelacion como solucionas ese problema de nivelacion ? por que claramente no esta funcionando su autonivelacion yo tengo esos proeblemas

[@siu00gas]

Hey guys, since the last lychee update I've been getting failed prints and watching this video makes me think it might be this. Any way to send Derek a picture of my last print for his advice?

[@Lychee3d]

Hi! You can join us on discord, Derek is really active and all our community will be able to help you! Here's the link : discord.gg/NGDDTgY

[@PatchGuilf]

What would cause a plate to become unlevel once levelled?

[@snarkyarts8182]

Lol, we own the same adjustable speed square.

[@J3DTech]

We know a good tool when we see one

[@MicheauFr]

y a une vf quelques part ?

[@Lychee3d]

Non pas pour cette vidéo, on espère pouvoir proposer ce genre de contenu en VF aussi par la suite :)

[@Lychee3d]

Je rajouterai qu'il est possible d'utiliser les sous titres avec la traduction automatique en français, cela marche plutôt bien dans l'ensemble.

[@user-pe8rs8px4d]

Эти проблемы из-за калибровки стола. В частности в методе калибровке по листу бумаги А4.

[@malyxxplays7949]

sometimes i print something and it looks great but then the side with the supports is glossy.. why is this?

[@Lychee3d]

Did you clean well without the supports?

[@stratostear]

In summary LEVEL your build plate for every print, you muppets.

[@Lychee3d]

If it's done right the first time, you have some prints before needing to do it again, but you're right, to be sure you can :D