M113 V8 turbo Engine & transmission back in the car !!!

[@robseignior4389]

What a professional. Outstanding attention to detail and improvisation.

[@JMSpeedshop]

Thanks for the support

[@Rourkeize]

Very nice! Well done on the exhaust heat shielding. I like that you reuse the waterpassage at the oil filter housing to cool the turbo!

[@adriaanversluis1390]

erg benieuwd naar het eindresultaat 💪

[@JMSpeedshop]

Ik ook 😎

[@lozl]

Fantastic work! And a very sxciting milestone. It looks like a great fit, and very professionally finished. I like the turbo bracket you made, reminds me of the OEM item on the cosworth YB (looks just like it). Looking forward to the next video.

[@JMSpeedshop]

Thanks . For the support

[@slimmolai8096]

First view First comment All the way from Zimbabwe 🇿🇼 Keep it up

[@JMSpeedshop]

Thanks 😉👍

[@ridgeman3391]

Ongelooflijk veel respect. Super veel kennis en ervaring. Ben benieuwd of je mijn M113 V8 kunt upgraden met een turbo en of het zin heeft.

[@JMSpeedshop]

Dank je wel 👍. Mail even je plannen via jmspeedshop.com. Contact form

[@ridgeman3391]

@@JMSpeedshop Bedankt voor het bericht. Ik zal zeker even mailen. Maar moet nog het een en ander laten repareren.

[@IwillBwaiting]

It looks like a nice wedding where the car and the transmission/engine are re-united once again! Goeie video ook; goede edits en een goede flow naar mijn mening. Keep it up! :)

[@JMSpeedshop]

Dank je wel 😃

[@BizzyVlogs]

Coming along nicely

[@JMSpeedshop]

Thanks 👍

[@narcissistinjurygiver2932]

i am about to add an oil pressure/temp sender to my m113 as well. good job

[@JMSpeedshop]

When you think of it it is a little weird that there is not standard a ready for oil pressure on these engine's

[@narcissistinjurygiver2932]

@@JMSpeedshop i am planning to run a oil hose from that fitting to the sensor but what concerns me is if the belt shreds it will take out the sender and i will loose oil pressure. the plastic idler pulley loves to break

[@JMSpeedshop]

Yes that is why i moved the sensor upwards as far as possible. But a pulley that breaks is also a case of to long driving with old parts. If you change the belt also change the pulley

[@narcissistinjurygiver2932]

@@JMSpeedshop i ha a new one break in less than 100 miles. sometimes they just suck

[@JMSpeedshop]

I know the older models where steel or aluminium

[@blackbox-ukltd7789]

Really pleased i found your channel, I'm doing the same engine and transmission swap into a Humber, not adding a turbo to mine though. Will also be running an Ofgear TCM and Haltech Elite 2500 ECu, would love to chat sometime about what lessons you've learnt the hard way!

[@JMSpeedshop]

Just ask what you want to now 😉

[@DouEditz]

WOW MAN!! GOALS

[@JMSpeedshop]

Thanks 👍

[@djgoodguy3681]

I want to see that car run great!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! PLS!!!!!!!!!!!!!!!!!!!!!!!!!!

[@krzychujerzyna3833]

Awesome 😍😍😍

[@JMSpeedshop]

Thanks 👍

[@5peedxFr34k]

Hoe heb je de poorten op de cilinderkoppen geblokt voor de secundaire luchtpomp? Omdat je het inlaatspruitstuk hebt omgedraaid toch.

[@JMSpeedshop]

Ik heb een spacer plaat gemaakt van 10mm dik die deze ook afdicht . In de playlist kan Je deze video terug vinden Dit is ook nodig om het spruitstuk wat hoger te krijgen zodat je de gasklep weer kan plaatsen

[@Mercmad]

What is the Part number for the tandem pump? I am looking for a pump to fit a OM 606 and not having much luck here in Australia.

[@JMSpeedshop]

Tandem pump for om606 w210 . A2104660901. A2104660801

[@Mercmad]

@@JMSpeedshop Cheers!

[@JMSpeedshop]

👍

[@sylwia1398]

8hp gearbox the best for this engine

[@JMSpeedshop]

Good option for next time.

[@chouaibelberhami9940]

Hi, did you used the break-in oil, or do you recommend only the normal factory oil?😅

[@JMSpeedshop]

I use assembly lube when building up the Engine. When starting it for the first time. I just use regular oil. After 500-1000 km i will do a oil change

[@blackbox-ukltd7789]

Can i ask what engine mounts you are using?

[@JMSpeedshop]

Oem supports with urethane mount from strongflex

[@ВладиславДанилов-р4ч]

Color 881???)))

[@JMSpeedshop]

Which color