M35A2 “Whistler” trying to clear clogged injection line. (5)

[@southernhomestead5749]

Thanks for sharing

[@thomaspetroff9117]

The best way I found to cut the stale diesel or Biodiesel shellac, Is lacquer thinner or Carb/choke cleaner. Brake cleaner, or parts solvent won't touch it. E85 gasoline will also dissolve it. TGP

[@timsteachablemoments1786]

Thank you for the tip. Thanks for watching.

[@tjs_welding_and_fabrication]

Why the loop.

[@timsteachablemoments1786]

To keep the metal line from cracking.

[@alshaw9420]

wow the years of teaching you can give very nice , got one tough onefor you, on a 1982 6.2 3/4 ton 4wheel i want to drop oil pan and see if my oil pick up tube o ring in bad got low oil pressure and i guess put a new oil pump in too but not sure one what pump to buy thanks again sir

[@timsteachablemoments1786]

A fast search showed several brands available. Including GM. Oil psi is almost never a problem with the 6.? Unless cam, crank or rod bearings have been run dry. When you pull the pan, pull a main bearing or rod bearing cap to see how the bearings look. If copper is showing, figure on all new bearings.

[@alshaw9420]

@@timsteachablemoments1786 will that oil pan drop easy or do i have to remove crossmember

[@timsteachablemoments1786]

@@alshaw9420 It will drop in the stock location.

[@alshaw9420]

@@timsteachablemoments1786 good looks tight thanks