50 NEW Tools from Milwaukee - Do You have Tool Deficiency?

[@0808dsmith]

Just bought a 6 gallon pancake air compressor for my smaller nail guns and staplers. Old one was pushing 20 years. Amazing how light the new one is compared to the old one!

[@MachineryNation]

Ideal mate, good work.

[@batmanpaul1]

I love it 👌🏻👌🏻👌🏻

[@paulraymondstamp4111]

Thx for showing the new tools

[@MachineryNation]

Thanks Paul 👍🏼

[@stanleykachuik2589]

Milwaukee m12 rotary tool 2525-20. Love the upgrade in power on the precision dremel bits.

[@elliothetherington8112]

great video, awesome collection of new tools. love the precision screwdriver set and those new hammers. I've just bought an ammo box and M12 inflator next purchase M12 impact I think.

[@MachineryNation]

Awesome! Love the m12 range!

[@tinkeringtaylor3053]

Nice set of tools James, the last tool I bought was a workpro cordless ratchet wrench, ok for what I needed it for

[@MachineryNation]

Ideal Nev, yeah those budget tools are ideal if that is all you need and it does what you want it to. I will check them out 👍🏼

[@DJC995]

Hi James Nice one lots of nice tools last tool was a Hikoi 18v blower for cleaning the baler & topper what next good question 😀😀 Thanks again

[@shaun30-3-mg9zs]

Hi James, not a bad set up there, all those Milwaukee tools I wouldn't say no to any of them. I do have a fair few power tools but they are mains powered I have sockets every where in my workshop all spaced a meter apart, I only have one Black and Decker battery drill, I mainly have old tools, hand tools and power tools from my local car boot sale I've collected over the past 25-30 years. Enjoy your new Milwaukee tools, Great video take care

[@RazorTheDragon]

At least you went with the right brand

[@MachineryNation]

😉

[@VIEW5551]

Just bought the quik-lok leaf blower, and I'm pleasantly surprised with that. Next, I want the backpack blower, rear handle saw, and some 12.0 Forge batteries. I really want to see what the lawn mower does with the 12.0 Forge!!

[@MachineryNation]

Nice! Can’t wait for the forge 12ah!

[@namelastname2844]

I just got some of The Klein tools modbox stuff. They're pretty cool.

[@MachineryNation]

Pretty cool 👍🏼

[@SteveAndAlexBuild]

One of our latest deliveries was that claw hammer 🔨, very nice 👌🏼 🟥🤩🧱👍🏽

[@MachineryNation]

@@SteveAndAlexBuild beautiful tool 🤩

[@marccadec6978]

My latest purchase is a Husqvarna 540xp mklll And a Makita ½ inch router. That joint is called a universal joint.

[@MachineryNation]

Nice, thanks mate 👍🏼

[@MrDbone75]

A very good Tuesday evening to you all in DEVON from Wellington Somerset

[@timfagan816]

I'm in wellington new Zealand! Used to live in Cornwall.

[@MachineryNation]

I just have Wellington boots 😉

[@timfagan816]

@MachineryNation they call them gum boots in new Zealand 🤷🤷 I have no idea why! 🤣

[@Jordan.E]

Some beautiful looking tools there... I definitely need an upgrade lol That screwdriver reminds me of Jurassic Park...

[@MachineryNation]

Yep, 100% Jordan, when they are in the lab.

[@WildlifeClips365]

Nice one James. I was thinking at some point you could do a video of cordless orbital sanders for using for outside jobs including maintenance of wood furniture and things in the garden. I have used Makita and have just bought the Milwaukee version too. There are lots of options out there and I think it would be good to compare them in detail like your strimmer line video giving some good stats on each. Thanks again. Obviously corded would be good, but in a number of cases you need to use cordless.

[@dylanaustinphoto]

Anyone know where to find the counter sink set? Or honestly when/where any of this stuff will be available?

[@MachineryNation]

@@dylanaustinphoto www.alanwadkinstoolstore.co.uk/accessories-c3/drill-bits-c13/milwaukee-4932493574-6-piece-hss-countersink-bit-set-p61708

[@tomcardale5596]

Would be interested to see a comparison of the Milwaukee grips compared to the Knipex Cobra. They are the gold standard at the end of the day!

[@MachineryNation]

That would be cool. But I’m sure I will get some hate on how I pronounce Knipex Haha

[@tomcardale5596]

@@MachineryNation you'll get stick whatever you say, so just try and come up with as many silly pronunciations as possible. kuh-nip-ex kuh-nipe-ex nip-ex nipe-ex kuh-nip-eeks I'm sure you can come up with some more! Or just never say the fateful word at all, "here are some German made Cobras".

[@MachineryNation]

@@tomcardale5596 hahahaha love it 😂😂😂 don’t get me started on Husqvarna

[@stuart6973]

Just bought a Fein metal nibbler. Hopefully next on the lift will be a TCT metal chop saw.

[@tomvarley1081]

My next tool is a makita 18v bandsaw and yes it’s a bad habit but I love it ❤❤

[@MachineryNation]

I’ve never used a battery bandsaw. Perhaps I should add it to the list 😂

[@patrickchayer3401]

Omg!!!!!!

[@SandyMasquith]

So jealous! My tool deficiency is spiking. I need to run to the hardware store STAT! Awesome tool sets. I'd be interested to compare that Milwaukee multi-bit set (the one that doesn't ratchet) to the LTT (Linus Tech Tips) multibit screwdriver. I hope your next "fix" is to get the Milwaukee cordless router and use that with the chisels to make a thing. ;). thanks for posting, James. Neat stuff.

[@MachineryNation]

I really want to trim router but also want the big one!

[@CA34562]

Could you please tell us the difference in weight between the high output 8.0 and the forge 8.0? The specs online seem to be a bit inconsistent.

[@MachineryNation]

Yes we will address this in a future video 👍🏼

[@patrickomalley5536]

Have you a link for them all?

[@MachineryNation]

Heck out the link in the description for for the link 👍🏼

[@realaestheticss8839]

Could you please list the prices and recommendations of where to purchase these tools from. Cheers

[@MachineryNation]

If you go on to the Milwaukee website from the link in the description you can then choose the tool and click where to buy 👍🏼

[@jonathanmounty3502]

Not sure if that is a tool collection or a work of art. Superb Latest tool of mine was Ryobi one + PEX cutter.

[@MachineryNation]

Both mate, easily haha.

[@YouTubeWeAllTube]

I have it. Finally! Somebody gets me 😅

[@MachineryNation]

Yep, it’s a thing haha

[@spencehh]

Dewalt trim router bought on Friday. Table Saw or a bandsaw wanted next…and a mitre saw…

[@MachineryNation]

Nice mate 👍🏼

[@txvet7738]

What is the part # for that pliers/cutters set?

[@adamheiermann2462]

Do they sell the foam alone? We don't have any of in the US yet but planning for the future...

[@malthe7461]

I just bought a new Milwaukee M18FID3-0 Fuel to feed my addiction but also because I have to use it privately.

[@MachineryNation]

Nice 💪🏽

[@iancorbishley7817]

Just bought an M12 hatchet, lovely bit of kit and my next purchase is going to be a wet vac

[@MachineryNation]

Nice mate 👍🏼

[@redstihl9027]

Now just to learn how to use them!

[@MachineryNation]

Yeah, no idea. Except the hammer 👍🏼

[@tristangynn2925]

Very nice! I can see those bolt cutters being a big seller in Liverpool……….

[@almclean4835]

The last tools I bought were Husqvarna crankshaft seal pullers. Next tool, don’t know. I know those pliers as channel lock pliers. The screwdriver reminds me of Star Wars.

[@MachineryNation]

Nice Al. I must watch Star Wars. Still haven’t got round to it 😂

[@almclean4835]

@@MachineryNation I’ve watched everyone! Watched my first one in the late 70’s, well before your time😁

[@MachineryNation]

@@almclean4835 I’m not sure why I have never watched one 🫣

[@almclean4835]

@@MachineryNation that’s easy to busy making your own films 😄

[@barty2322]

Just bought a m12 right angle die grinder and next tool I want the new upgraded circular saw

[@MachineryNation]

Love my angle die grinder 🤦🏻‍♂️

[@txvet7738]

I just got the Milwaukee M18 pruning hatchet w/ 6ah HO battery deal. Next will be the new M12 Stubby!! I wish Milwaukee would share some of the stuff that y’all get outside of the States like the plumbers pliers or cobra pliers! What’s a good place to get some Milwaukee tools from outside of the States?

[@captainredbeard1749]

Makita 18v lawnmower, really want a finishing nailer 🤞

[@adamtingle3748]

Jurassic Park!!! 🎉

[@MachineryNation]

100% correct hahaha

[@anythingbutmyrealnamegoogl9615]

At least you were honest about getting all this stuff for free. Most people doing these videos were given the everything but make it look like they paid for it.

[@MachineryNation]

Always try to be open about it, while keeping suppliers and viewers happy 👍🏼

[@jakobechildrey1220]

10:05 reminds me of jurassic park

[@MachineryNation]

Yep, that’s the one 👍🏼

[@matthiggins6891]

Just bought a Milwaukee 12v jigsaw. Milwaukee 12v dab radio next

[@matthewbravington2743]

Wera self setting wrench set. Want them but have to stop myself spending on tools.

[@THEBEARDEDTOOLGUY]

Do a TEST with the 8 AMP FORGE BATTERY vs the 6 AMP FORGE BATTERY on the BEST RICIP SAW you have I would Imagine you have the SUPER RICIP SAW

[@MachineryNation]

We will compare them for sure. But we don’t have a super sawsall afraid.

[@haydnmiller5306]

Wrench Wrench Wrench, also would be nice not having to buy 2 sets of everything to have sae and metric

[@MachineryNation]

Spanners 😉

[@dynamisdk]

Makita 18v Router and I'd like to get myself a 2x18v pludge/track setup however I've just tried a Milescraft TrackSawGuide and although it won't replace a proper plunge saw, so far for what I'm doing its been ok so may need to think of another tool for the 'next in line'

[@TimboTactical]

I’d call that a swivel extension or I’ve heard something like universal socket Edit: Didn’t know Milwaukee sold American made “spanners” lol

[@MachineryNation]

Oh yes “spanners”

[@THEBEARDEDTOOLGUY]

Got the new DEWALT XR DCD 1007 KIT LESS THEN A Week Ago my ADDICTION has CO$T me A HALF Years INCOME and that's what I have $PENT in just 3 years

[@stephenkelly2067]

Last was milwaukee die grinder next be goodness knows

[@MachineryNation]

Love the die grinder

[@ЗДиЧ]

Milwaukee 2163-21.

[@timclarke8565]

have thee been up that brizol? " ooouver 50 neeeeew toools" 😂😂

[@JDMworx]

we call them swivel sockets, dont know if thats the name but thats what i know it as!

[@RobertSimpson-sz5jl]

A Stihl battery hedge trimmer. Going to get Dewalt compressor for the car 😊

[@gmcallsuk]

Wobble adaptor

[@MachineryNation]

Great name 👍🏼

[@scott5106]

Wobble connector.

[@MachineryNation]

Sounds about right 👍🏼

[@darnellanthony85]

M12 oscillating tool the fuel version

[@zarajoe1]

Thise pliers look licensed from nws. They look identical

[@MachineryNation]

Could be

[@kkeavo]

Screwdriver reminds me of “The Rock”

[@MachineryNation]

Jurassic Park in the lab 👍🏼

[@luisgarcia5950]

It’s called a swivel 😂

[@MachineryNation]

Nice 👍🏼

[@minhdaubu2363]

Don’t you mean do you have tools obsession?😂

[@АлександрНелюбин-с1н]

Снова NWS)))

[@jprobert7360]

No 16 or 18mm sockets in the socket set. No good if you ever work on cars

[@billgates2903]

Jurassic park

[@MachineryNation]

100% Bill 👍🏼 I’m glad I’m not going mad haha.

[@anthonykeane154]

I'm hopelessly tool Deficient 😂😂 my last tool was a brushless Ryobi circular saw 😅 🪚 I can only dream of a Milwaukee setup but it is out of my budget for now 😭😭😂