Mahlkonig E65S Grinder Maintenance & Cleaning

[@JimTMcDaniels1]

On ours, also one of the 3 hopper metal short anchor lock pins is missing.... hope it didn't damage the grinder teeth.. I don't see a replacement part for these pins. I guess I'm going to have to try to see if a nail or used rivet pin will fit the hole and then super glue and baking soda into place(as well as the 2 remaining pins so we don't loose those). Thanks

[@JimTMcDaniels1]

Is the knob pull off/removable? Ours needs some electronics spray cleaner sprayed into the knob shaft.. Because the knob response has gotten bad/jumpy. Due to common age/oxidation of internal contacts... But unplugging and spraying with the knob installed, blocks the spray from getting where it needs to. Thanks

[@everythingisamazing5765]

Do you have to readjust the grind settings after the cleaning process?

[@DiegoBaetcker]

Not necessarily. For sure u need to do some again adjustment to calibrate your espresso

[@JonGooseman]

INCORRECT