I'm a Deere guy. That being said, this was a clearly biased review favoring the Deere. The door is a game changer and you minimized it by saying it didn't seal well. Nah. Seals just fine.
@88cruzer18 ай бұрын
He doesnt know anything about Kubota's. Its obvious. There's a latch at the front of the door on the bottom.
@HighCountrySolutions6 ай бұрын
Literally, kubota doors do not last..they jam, rattle and after bit the doors just stay up, because there a pain.
@rontopping20485 ай бұрын
@@HighCountrySolutionscorrect and very heavy
@samchampagne22413 ай бұрын
The deeres doors don’t seal well either
@shiraz17362 ай бұрын
I sat in a kabota just the other day and found this style of door to be flimsy and overrated.
@UN4RACING12Ай бұрын
The Deere the tracks pop off easy and the rear grill may as well be glass. Grill looks rock solid but back into something and find out . Zero bracing. Rub a tree or turn on a rock and the tracks pop off. I'm a not so proud owner of a deere here. 325G
@dansdiesel7679 ай бұрын
Dude why do a comparison if your absolutely biased on deer just say I love deer and could care less about Kubota
@williamg.68358 ай бұрын
Agreed. Video should be titled “why I prefer John Deere skid steers to Kubota”. I hate it when people just point out every little thing they don’t like.
@andrevernon19329 ай бұрын
I do not have any experience with operating a Deere, but I own Kubota and have operated for thousands of hours on jobs. Kubota is a great machine, and I believe that I could point out many advantages. I much prefer Kubota's full hydraulic pilot controls compared to electric-over-hydraulic types, as I believe that I can operate most accurately and without lag in response time. I also have the theory that fully hydraulic is going to be more reliable. I am not a big fan of more electrical / electronics. As I get older, there are some advantages that I especially appreciate about Kubota. Stepping up into the Kubota is the easiest I've experienced with the lower height of the bottom of the door opening, and the wider door opening. I spend many, many hours operating a compact track loader. That said, there are many jobsite conditions that require me to get out, and back into the machine many, many times per day. The Kubota arm wrests are very quick, and much easier to just flick up, and back down than moving a big horseshoe single piece all the way over my head, and back down every time. The Kubota arm wrests also have an excellent designed shape and padding density. Again, I'm getting older and my shoulders hate the horseshoe, and very much appreciate the Kubota design. And how about that Kubota cab space? I doubt anyone beats it, and I know that some other brands are far less spacious in every way. Leg room, elbow room, head space, all of it. I have the notion that Kubota's control switches are down low because there is plenty of room for them, and that some other brands put them up high because of a lack of space. Another important Kubota advantage over some brands (I don't know how the Deere compares on this) is that for me the pilot controls are absolutely perfectly positioned. They are exactly ergonomically correct for me. I know that some other brands are not even close to being ergonomically correct. For me, control switches on the Kubota being down low is also an advantage. I find it easier to handle those down low than having to reach up high. And about sunlight, the sunlight is more likely to blind you when you have to look up than when looking down at control switches, etc. In my opinion, that is a Kubota advantage. From a performance standpoint, I believe that Kubota is going to be very hard to beat, and will probably outperform the majority of the competition. As for reliability, based on my experience, the Kubota is second to none. I do not believe anyone can beat it's reliability. How high is the top of the Deere's cab? It looks significantly higher. On most jobs that does not matter, but on some jobs it is advantageous to be lower to go under obstacles. What about ground clearance? That does matter, and Kubota has the advantage. There are certainly many other details that could be discussed, but I know that if I were going to buy a new CTL today, it would be Kubota, 100%. My second choice would be Takeuchi. When it comes to getting maximum work done, I do not believe that any other brand will beat those two. To be fair, the Deere does have some advantages. It does appear that some maintenance components are easier to access. But, there might some trade-off with so many removable panels on the Deere. Is there a disadvantage from the standpoint of loss of overall rigidity of the machine? We never intend to have accidents, but what happens to the Deere if it makes a hard rear impact with another piece of equipment? In that situation, I believe the rigidity of the Kubota would have an advantage with its rigidity. Will some of those Deere panels become loose and rattle over time? I don't know, but I wonder. That is my two cents. I'm not a salesman of any brand. I am an owner / operator that spends countless hours doing work, operating equipment for a living.
@shiraz17362 ай бұрын
Thanks for your information. Unfortunately we are looking at a machine specifically for mulching and so far I have noticed many people saying that the kabotas hydraulics overheat when they are worked hard with a mulcher, and unfortunately we just can't take a chance with these ridiculous prices these days to buy one and have cooling issues. We're not sure what to get tbh.
@Dorko859 ай бұрын
The JD is an awesome skid, I do hate the door as the boom has to be up or down. Sometimes it’s painful
@jamesredmond1241Ай бұрын
John Deere lover
@rontopping20487 ай бұрын
Only benefit to double flange roller is ride quality. Does not increase power to ground .
@Plowboy709 ай бұрын
I’m an overhead door guy, someday the others will figure out the sales they are giving away. Lots of great skid steers out there. Service, parts & dealerships make the biggest difference.
@shiraz17362 ай бұрын
I checked out loaders with these doors, and though exactly what he said, they seem flimsy, and I could create air gaps to the cab chassis just by applying a bit of pressure to the door.
@Just_An_Idea_For_Consideration9 ай бұрын
1) What is your price on the John Deere? 2) Will you deliver to Indiana?
@NoblemansXchange2 ай бұрын
I like that crispy new Deere looks nice. That being said Kubota all day.
@WesternEquipment2 ай бұрын
Why is that?
@USA-vo5byАй бұрын
John Deere has gone "woke" . No thank you I'll buy a Takeuchi or Kubota, they might be Japanese but at least they sell equipment and not propaganda.
@hhazelhoff1363Ай бұрын
Ohh dear, buy a Kubota, you won’t be disappointed.
@Jay_Force_One8 ай бұрын
I came here in the comments for one thing and one thing only. The Idler wheels are doing the same thing. The double flange isn’t holding the track in line any more than the single. If anything, the single allows for LESS lateral movement of the track as there is lesser space for movement between the inner sprocket guide track. At the end of the day, they’re there for tension and are not going to keep the track on under load if it’s trying to come off. I’m buying the Kubota all day. Might be more expensive to operate (apperently), but out the door Deere is going to molest you as they do. Deere is the most over priced stuff you can buy. People buy it at that price on the sole principle that it says John Deere on the side. It’s a novelty. You can’t tell me that orange machine doesn’t look 50,000 times better. It’s fucking orange dude. That’s sick.
@phillipbaxley96639 күн бұрын
Makes me NOT want to buy a John Deere product.
@cliffh84869 ай бұрын
Deere is a nice but the Kubota -3 series has cleaned up and made a much better machine.
@chucks43289 ай бұрын
I'm going to say I prefer the battery placement on the Kubota. On my JD 320d to replace the battery the manual says to start the machine and raise the boom. I'm replacing the battery because it won't start. I'm on my third battery and the original jd battery was good. It shorted out and wouldn't take a booster. It can be done but prepare for smashed fingers. No machine is perfect. There's things I like about the JD better and things I like on the Kubota better.
@banffdigger9 ай бұрын
Seems to me like the with the deere if you have a major issue and can't raise the boom your SOL, whether it be electrical or hyd. I haven't ran a newer deere but I hated the old ones I ran.
@chucks43289 ай бұрын
@@banffdigger Pretty much spot on. I think all skid loaders suffer from that issue but the JD is worse.
@boosteddartls28335 ай бұрын
The overhead sliding window is very common and great use here , he clearly is a JD guy
@bradh749 ай бұрын
Wish I could afford one. Most of the guys I know like their New Holland skid steers because they last for a long time. They aren't cheap either, JD makes some nice stuff but you pay for a name and there no telling how long it'll last.
@Charlie-go6eb8 ай бұрын
One other thing, anybody think this sales guy actually knows how to use these machines.
@timroberge14989 ай бұрын
I love Kubota products and I started out wanting the Kubota...until I demoed it. I hated the cab, it squeaked, the door chattered, hydraulic and engine noise above 1/2 throttle was awful. The door was way too hard to get in and out of in a hurry, especially with something other than a dirt bucket on it. The lights on the back of the cab shined directly onto the cross bar on the loader boom, which reflected a bright orange glare onto the front windshield, that crossbar also blocked a lot of the rear facing light facing work light. None of the controls or switches were in convenient places, radio and HVAC controls were behind the operator and no auto idle. The Deere is hands down the nicer machine, so much more thought out. But the Kubota is like $15-20K cheaper. The Deere is the machine you buy for yourself to run, you buy the Kubota for someone else to run.
@rontopping78119 ай бұрын
Svl75-3 is totally different than -2 models. Quieter in cab than my bobcat t 66 . One piece cab . Game changer do your homework. -3 across line soon
@countrycaretakerpropertyse79819 ай бұрын
Im a bobcat guy. I want to demo a -3 but I just wish these other companies would come out with more clear cab options for visibility.@@rontopping7811
@djveles46299 ай бұрын
Kubotas are made for the weekend Baby Hueys that want to look like men. Never seen one at big job sites, usually I see them spreading mulch at someone's rose garden.
@Charlie-go6eb8 ай бұрын
Lmao, you’re a tool. I’d be surprised if you even own a basic Deere riding mower.
@G.I.JeffsWorkbenchАй бұрын
Raise the boom then get under it & lift the cab without blocking / propping the boom? That’ll be your last day on my job site if I catch you getting under a raised boom, empty or not, unless it’s a no kidding emergency. In your next vid., let’s compare purchase price, reliability & depreciation (resale value, not tax deduction). This would be a great help for the majority of loader owners I know: 1) run the snot out of it for 10,000 hours, or 2) buy new @ 1000 hours; particularly those of us in category 2 who want to maximize warranty time & minimize down time.
@rontopping78119 ай бұрын
Kubota svl75-3 now has one piece cab .much quieter cab Radiators above the engine now. Serviceability is the best in class. Compare a svl75-3 and 325 g .
@88cruzer18 ай бұрын
Yep. Very happy with mine. It's awesome in the snow too. I really like the track pattern. Cab is quiet and warm.
@_P0tat07_4 ай бұрын
Im a huge Deere fan. They make fantastic machines. But I also do trust kubota. I’ve never run a skid steer so I can’t make any comments on that. But I’ve run a kubota mini excavator for a few hours and found it very comfortable. And kubota engines are very reliable, much like the yanmar engines Deere uses. I trust both the engines to be very reliable given they’re taken care of and serviced. The cab in the Deere definitely looks well thought out but I do think I’d prefer the slide up door on the kubota. I’m a short guy so headroom isn’t an issue for me. But I’d also like to be able to run equipment with the door open if needed. If I had the budget for the Deere, I’d definitely take it.
@tylorcox89142 ай бұрын
nice review im a deere guy.. there is also a handle inside the cab that will release the boom in the event your machine shuts off for whatever reason. only thing that would stop you from getting out would be if something was under the boom.
@MikeFree225 ай бұрын
That may have been the most biased review or “comparison” I’ve ever watched. Never used a Deere…hundreds of hours on a Kubota…fantastic machine.
@3406Accert8 ай бұрын
Again bloatingly spewed wrong again five oh two , spewed if I'm needing to service the machine l do need to have the CAB ON THE GROUND ? What ? it's already on the ground and so is the bucket / boom assembly and bloating the wrong part of a machine here, the proper way is have a bucket on the ground to lift the cab on this type or make of machine. Go get yourself another non beef McDonald's sandwich and bloat some more.
@Charlie-go6eb8 ай бұрын
Came across this video. It’s comical how these sales guys attempt to compare machines. I have a 97-2. It’s a flawless machine, it does what it’s suppose to. Deere makes a great machine as well. But the bottom line is tell the msrp’s of each machine. There’s a 30k plus difference in the two. If you want to spend that, no harm, have at it. The reason there doing these video’s in the first place is Deere, Cat, ad some others are loosing lots of market share to Kubota. It is what it is. I can’t justify another %40 for my use’s, your’s may differ.
@dustinpitts27416 ай бұрын
In the south the Deere dealers act like your bothering them to just look at a machine I will stay with Kubota their good machines and better service and treat you better
@flyinPowerlines3 ай бұрын
Love my John Deeres. Would not own another.!!!
@WesternEquipment3 ай бұрын
They are pretty awesome! Which one do you have?
@flyinPowerlines3 ай бұрын
@@WesternEquipment 325G, 4052R and the 35P.
@aroundthegroundlandscaping71079 ай бұрын
For years I have owned deere went to purchase a new machine and I couldn’t even get close to the numbers that Kubota gave me I’m talking a 20000 dollars in price between the two. no machine is worth that different in cost yes it was model to model pricing
@BrokenSpur_Treeservice9 ай бұрын
Glad I got a deer way better machine to bad service sucks a** in my area
@pjp80s6 ай бұрын
Clearly a Deere boy doing a review….
@88cruzer18 ай бұрын
Video sponsored by Deere.
@alfredfleming32897 ай бұрын
No one opens up to service on better than the Deere. Don’t own one but wish I did.
@WesternEquipment7 ай бұрын
I completely agree and also hear the same from customers all the time.