Tap to unmute

Make 3D Prints FLY

  Рет қаралды 6,094

Groundeffected

Groundeffected

Күн бұрын

Пікірлер: 58
@jamesbeen9904
@jamesbeen9904 5 ай бұрын
Dude, the drone to RC footage is DOPE!
@malibuman792004
@malibuman792004 5 ай бұрын
That looks really fun. I always enjoy your videos.
@johnfreely759
@johnfreely759 6 ай бұрын
Excellent. I fly remote planes also so I enjoy these clips. I have the same hobbies by chance. And it’s good to take break from painting and get outside.
@motor1841
@motor1841 6 ай бұрын
It's not the fall that breaks your toys, its the sudden stop! Cool to see you doing other hobbies and painting new things is always cool. Good video Dad. Edit: very cool flying footage
@jmaxx6894
@jmaxx6894 5 ай бұрын
This was to Awesome. If I had a 3d printer like that I would deffinetly do this. I will be putting this on my to do list.
@zamwhich4tw
@zamwhich4tw 6 ай бұрын
That's awesome!!
@MichaelDeLawter
@MichaelDeLawter 6 ай бұрын
Gotta admit, this looks fun as hell!
@phreshxmetal
@phreshxmetal 5 ай бұрын
This was awesome, would love to see more! A diy instructional video would be amazing 🙏
@JGibs772
@JGibs772 5 ай бұрын
Props my guy....great flight!
@phreshxmetal
@phreshxmetal 5 ай бұрын
Aviation pun?
@SinisterCheshire
@SinisterCheshire 5 ай бұрын
loved every second of this lol, especially..."No idea where you are.."
@menyou6873
@menyou6873 5 ай бұрын
Loved this! and a very nice change of pace - love your content!!
@Groundeffected
@Groundeffected 5 ай бұрын
Thanks dude.
@hugoalex-vk2lj
@hugoalex-vk2lj 5 ай бұрын
Hello great video. Can you share the model for the motor and Propeller.
@jubeiiiiii
@jubeiiiiii 5 ай бұрын
Dad rocks with every things he touches
@williamd1732
@williamd1732 6 ай бұрын
I've always been interested in this hobby, but I already have WAY to many expensive hobbies. But it was awesome to watch this. The "chaser" camera footage is way cool. Thanks for sharing.
@WaRn00b85
@WaRn00b85 5 ай бұрын
Awesome man! Wouldn't mind seeing more of this sort of content either. Lekker dude! Blessings van Kaapstad af. 😀
@mrcrowleycrowley5643
@mrcrowleycrowley5643 5 ай бұрын
This is Very Nice 👏👏👏👏👏
@LeeShand
@LeeShand 5 ай бұрын
Love it!
@thegingerdronepilot
@thegingerdronepilot 5 ай бұрын
Love this video hahaha this was so much fun 😂
@fredsmith1970
@fredsmith1970 5 ай бұрын
So cool!!
@mojo13247
@mojo13247 5 ай бұрын
oh that is awesome.
@jessicagrafton6889
@jessicagrafton6889 6 ай бұрын
that looks fun as hell
@ippaku
@ippaku 5 ай бұрын
I have two bambu X1C both with 2 ams each. They never stop printing. Also hi Dad. Proud Patreon member trying to figure out what the hell I did wrong in my past life that this is my life now I blame my dad. Be well be you
@asheseven
@asheseven 5 ай бұрын
What motor and prop did you end up with? And the final weight of it all?
@Spicymage_fn
@Spicymage_fn 5 ай бұрын
I saw in the background of one of your vids that you were doing fpv, that's funny cause I do fpv and now after discovering your channel I want to try making my own figurines too
@tyronebrewer3219
@tyronebrewer3219 5 ай бұрын
Printing and Flying the JRM-01 Junior Mini RC Fighter Jet.
@aberodriguez4149
@aberodriguez4149 5 ай бұрын
Looks like I am going to add another hobby to my list. Thanks for the flying lessons. XD
@samael.projects
@samael.projects 5 ай бұрын
How big investment would this be to fly my own plane with fvp goggles exluding pla? Starting from zero
@jonholzworth4463
@jonholzworth4463 5 ай бұрын
Please make more of this content. I have made several planes with foamboard from Flite Test designs. I'd like to print a plane this summer. If you are anywhere near as good at teaching how to print and build RC planes as you are at painting, I will be in the air in short order, I am sure.
@RAM-1976
@RAM-1976 6 ай бұрын
Making me want to blow the cobwebs off of my quads and planes and get back to doing the hobby again, just need to find somewhere new to fly that is not going to upset someone. Keep the cool things coming dad.
@roguewolf0148
@roguewolf0148 2 ай бұрын
3rd times a charm 👍🏻👍🏻
@caiocampi6067
@caiocampi6067 5 ай бұрын
Ha! How fast these planes go?
@eastoforion
@eastoforion 5 ай бұрын
try revving engine to max before you throw it! also try throwing from a wingtip to get a good throw
@Groundeffected
@Groundeffected 5 ай бұрын
It was under powered I had full throttle also the wingtips are a thin 3d print it would snap if you held it there unfortunately. But after changing props I had enough thrust to launch under handed (it’s safer this way because those propellers bite hard if you hand gets caught)
@MacMac-nc5nd
@MacMac-nc5nd 5 ай бұрын
Nice one Dad !!!
@stevecool7096
@stevecool7096 6 ай бұрын
Love it. 👍😮
@MrMartynwelbourn
@MrMartynwelbourn 5 ай бұрын
Epic!
@smp1990
@smp1990 5 ай бұрын
loved this video! had no idea you were into fpv! maybe start a fpv channel? very impressive! even without inav!
@k3rmitPL
@k3rmitPL 5 ай бұрын
These shenanigans will surely end up with a flying dragon with a working fire breath!
@EBrichardson
@EBrichardson 5 ай бұрын
Very nice work! I envy your free time. I can barely find time to print and paint one model per month.
@SuperHolsey
@SuperHolsey 5 ай бұрын
Dad, it’s time to get into FPV RC dogfighting. VTOL VR in real life.
@nibirudoubter
@nibirudoubter 5 ай бұрын
KICK ASS VIDEO DAD! 🤘
@scottpovlot7376
@scottpovlot7376 6 ай бұрын
Very cool video. But I think if you want to do a lot of this you might want to start a 2nd KZbin channel. AirEffected?? This likely is interesting to a different audience of people than painters (although I am sure there is a bit of crossover).
@TheMadmichel
@TheMadmichel 5 ай бұрын
My grandad would of loved this. He made petrol rc planes I would get into it but never have any time 😢 we'll done you good sir.
@damo666
@damo666 5 ай бұрын
Time to make a Batwing
@aronjaeger
@aronjaeger 5 ай бұрын
thanks for also doing different things than painting figures it changes things up 😂
@Originaljonny2bad
@Originaljonny2bad 5 ай бұрын
where can i get the stl for the wing?
@Groundeffected
@Groundeffected 5 ай бұрын
I added it to the description
@Originaljonny2bad
@Originaljonny2bad 5 ай бұрын
@@Groundeffected cool thanx
@JohnnyFaber
@JohnnyFaber 5 ай бұрын
My man! Careful!! The FPV disease progresses quickly. Next thing you know you'll be flying paramotors...
@Groundeffected
@Groundeffected 5 ай бұрын
Been flying fpv for 6 or so years. And rc for like 18 yrs. it’s waay too late, there’s been paramotors and microlights in my search tabs for years hahaha luckily I’m just too poor
@Originaljonny2bad
@Originaljonny2bad 5 ай бұрын
do you still fly drones?
@johncnyc78
@johncnyc78 5 ай бұрын
Some Impressive shit right there
@thediscoman2001
@thediscoman2001 5 ай бұрын
that was fukin epic video
@DigitalConfusion
@DigitalConfusion 5 ай бұрын
Math is hard... Let's go shopping!
@jamesstepney4718
@jamesstepney4718 3 ай бұрын
I will never succeed that…
@michalis5817
@michalis5817 5 ай бұрын
They are very fragile. Foam is better
HOW TO 3D PRINT your own RC AIRPLANE
14:07
CNC Kitchen
Рет қаралды 726 М.
I Went to The Biggest 3D Printing Show in My Life - Formnext 2024
8:22
99.9% IMPOSSIBLE
00:24
STORROR
Рет қаралды 14 МЛН
А я думаю что за звук такой знакомый? 😂😂😂
00:15
Денис Кукояка
Рет қаралды 6 МЛН
Creative Justice at the Checkout: Bananas and Eggs Showdown #shorts
00:18
Fabiosa Best Lifehacks
Рет қаралды 34 МЛН
The Inn Of The Last Home
15:51
Groundeffected
Рет қаралды 9 М.
Zipline PROPS Look CRAZY! So We MADE Them        |        Free STL Download
10:15
Will This 3D Printed Horten Fly?
9:47
FliteTest
Рет қаралды 108 М.
Smallest HD FPV Flying Wing - Flik
12:02
rctestflight
Рет қаралды 267 М.
How to Print Thin Wall - Planeprint | Big Bobber
20:45
Troy McMillan
Рет қаралды 234 М.
3D Printed Airplane - Eclipson Pathfinder
12:03
FliteTest
Рет қаралды 61 М.
The Gap Between Analysis And Reality
11:35
SuperfastMatt
Рет қаралды 220 М.
2 Awesome Airplanes 1 BIG Difference
21:18
Troy McMillan
Рет қаралды 126 М.
Building a V22 Osprey - Part 2
22:12
Tom Stanton
Рет қаралды 3,9 МЛН
Uniformation gk3 pro
18:31
Groundeffected
Рет қаралды 6 М.
99.9% IMPOSSIBLE
00:24
STORROR
Рет қаралды 14 МЛН