Make a Citrine Ring with Leaves: A Silversmithing Tutorial

This tutorial shows how to make a lovely ring with a leaf and vine look surmounted by a carved Citrine. It has a distinctly Art Nouveau feel to it. I would call this one an advanced project. The stone in this one is a 9x11mm carved Citrine. For materials, I used 14 gauge sterling round wire, 16 gauge sterling round wire, and 18 gauge sterling sheet. As always, I use hard silver sheet solder and My-T-Flux from Rio Grande.
I enjoy sharing my knowledge with others, as I've taught people for most of my life. This hobby turned into a fun side gig for me for years while I taught public school. I love suggestions and hearing about others' experiences. What is your favorite project? What kind of tutorials would you find useful? Scroll down for information on my new Patreon!
Please feel free to share this video, and I would love to have you subscribe! Make sure to ring the bell for updates when new videos are uploaded.
I just passed 9200 subscribers! Thank you all for making that happen.
If you’d like to contribute to my efforts, or express appreciation, you can at the link below.
www.buymeacoff...
Thank you so much for all the kind words and suggestions!
Here is my website where you can purchase my jewelry, and can inquire about classes if you are in the Northern Colorado area:
www.cvpsilver.com
Thanks,
Chad Parker
Join My Patreon!
www.patreon.co...
Tier Information:
Silver Supporters
$5/month
This is a much appreciated way for you to support me while gaining access to some exclusive ad free content.
What's included
Support The Artist
Ad-free content
Silver Super Supporters
$10/month
You receive all benefits from the first tier as well as a shout-out on my channel. Here you will also get some behind-the-scenes peeks, and voting power concerning some upcoming content.
What's included
Support The Artist
Ad-free content
Patron shout-out
Behind the Scenes Content
Voting power-to determine projects and influence content.
Exclusive video tutorials
Silver Stars
$25/month
This tier provides all the benefits of the 1st and 2nd tier. In addition, you get access to a monthly live stream, a Q & A session, and discounts on jewelry.
What's included
Support The Artist
Ad-free content
Patron shout-out
Behind the Scenes Content
Commission pieces mutually agreed upon(delivered by mail)
Livestreams
Live Q&As
15% off jewelry purchases
Voting power-to determine projects and influence content.
Exclusive video tutorials
Silver Superstars
$150/month
This level of membership provides all the benefits of the previous 3 tiers. In addition, it includes live-streamed interactive instruction in a small group format twice per month for 8 hours per month total. This tier is limited to 4 people for now.
What's included
Support The Artist
Private community
Ad-free content
Patron shout-out
Behind the Scenes Content
Livestreams
Live Q&As
Live Virtual Small Group Instruction
Voting power-to determine projects and influence content.
Exclusive video tutorials
Commission pieces mutually agreed upon(delivered by mail)
_______________________________________________________________________
I NOW HAVE MERCH!
Click the store on the KZbin channel page to check it out.
, or here is a link:
chads-silversmi...
#jewelrymaking #silversmithing #jewelry #jewelryhandmade #jewelrytutorial #jewelrydesign #jewellery #jewellerydesign #handmade #maker #crafts #jewelryartist #bespoke #artist #silver #scrap #diy #jewelrytips #finding #bezelsetting #round #ringtutorial #soldering #rings #citrine #citrinejewelry #yellow #jewelrytutorial #tutorial #simplejewelry #artnouveau #simplejewellery
#prongsetting #ring #prongs #gemstones
Pretty Citrine ring
Art Nouveau ring
citrine nature ring
Making Silver Jewelry
Making Jewelry
make jewelry at home
make a silver ring

[@donzathreedee]

LOVE everything about this ring! I probably would have found it easier to solder the little leaves on last with easy & used hard for everything else. But you were good enough to make it work. The carved citrine is REALLY pretty!

[@chadssilversmithing]

Thank you Donza! I was a little worried about dropping one or two off near the end:)

[@scharnelleyon-locke8872]

lol 😂 Profanity intermission! 😂 Beautiful ring ❤

[@chadssilversmithing]

Thank you:)

[@Metalsmithnna]

That was an interesting project and a beautiful result!

[@chadssilversmithing]

Thanks Ann! I had fun with his one:)

[@ellentyner4589]

So beautiful!

[@chadssilversmithing]

Thank you Ellen:)

[@jeannem413]

Wow! That’s beautiful! Thank you!

[@chadssilversmithing]

Thanks Jeanne! I’m glad you like it:)

[@aumi.jewels]

I had to stop watching to text you and say Good Luck finding that leaf… I liked your profanity intermittent…. I busted out laughing… okay I’m going back to watch.. I text you again in a bit.. Michelle

[@chadssilversmithing]

Hehe. I spend more time crawling around on the floor than I would like:)

[@DianneCulbertsonJacques]

Hey Chad! I’ve got an idea for you. How about 3 ways to make adjustable rings…with stones. I’ve been looking for a good design for sturdy adjustable shanks for larger cabs like turquoise, jaspers, etc but haven’t come up with any I’m really thrilled about. Curious to see what you do!

[@chadssilversmithing]

Hello Dianne. I have a couple of videos: kzbin.info/www/bejne/bJbFlaShZdiNrdUsi=DqMQkfNTDHjf6jHH and kzbin.info/www/bejne/e6DTgHeLa86VoK8si=gwqunwDKNQ4aw8Xy. I may revisit this topic if I cn find some other good methods:)

[@KimOwen-taylor]

Hi Chad Thanks for another awesome tutorial. I love adding leaves and vines to my designs. Your ring is very beautiful. With regards to the tiny leaves, have you thought about using a shot plate to create them? I recently was gifted one. They are quite fun and surprisingly detailed considering the size. Xx

[@chadssilversmithing]

I've wanted to get some shot plates for a while, but just haven't saved enough pennies yet to buy some:). Thanks for the nice comment Kim!

[@lindahamlik6023]

Hello Chad I made this ring after watching your video and I must admit it came out really nice! Thank you for doing this video. I love a challenge 😊. You are a wonderful teacher.😊

[@chadssilversmithing]

Thank you Linda! I'm glad you enjoyed it! Send a pic to my Instagram so I can see it:). Thank you for the really nice compliment!!!

[@bjones4097]

Whew!! 😅 That looked like a tough one Chad! I would have ended up with a pile of melted leaves!! Your soldering skills are so good and we’re so pleased that you share them with us. Great video and the ring is lovely!!

[@chadssilversmithing]

Thank you Bill. I’ve always wanted to do something like this one, but wasn’t sure I could pull it off:). I appreciate your nice comment!

[@aumi.jewels]

It turned out really pretty… I was getting a little worried but you made it happen… Great job Chad, thanks Michelle

[@chadssilversmithing]

Thank you Michelle! Glad you enjoyed it:)

[@Laser2Leather]

I have been binge watching your videos 😂 waiting on see some equipment to come in… It’s been over a year since I have been able to use my hands, I’ve had the surgeries I needed and finally am getting my fine motor skills in my fingers back I can’t wait to get to making

[@chadssilversmithing]

That's exciting! I'm glad your surgery went well and your hands will soon be making stuff again:)

[@aumi.jewels]

Oh next time when you make leaves use your dremel and you bits to add the lines to make your leaf’s look real … Back to the video, Michelle

[@chadssilversmithing]

I’ll try that next time I do leaves:)

[@sheila3845]

Love the cutting of the citrine Beautiful ring

[@chadssilversmithing]

Thanks. That is a cool stone:)

[@barbarafields3973]

You can also find the fiskars at Home Depot in the gardening tools section. /been using them for years and include them in my student tool kit

[@chadssilversmithing]

Thank you Barbara:)

[@annermel9121]

I love the ring. I have a carved aquamarine that I may try in a ring after seeing this video.

[@chadssilversmithing]

Thanks! Send a pic to my instagram. I'd love to see the result:)

[@JustME-ft4di]

Wonderful! You could add Keum boo to the leaves to give them a gold glint.

[@chadssilversmithing]

I have yet to try Keum boo, but good idea. I’m planning to try that technique soon:)

[@lauryltedesco3436]

Amazing! I’m a beginner-self taught. I know you’ve done bracelet videos but is there any chance you could do a bracelet video? I have a stash of turquoise and I’m so scared to start! Lol. I want to honor my heritage and have made a lot of jewelry but no soldering. If not no worries, I’ve learned so much from you-thank you so much for that. You’re the only metalsmith/ jewelry design show I watch because you give so much information and actually show the process. Just thought I’d ask, but again, thank you for your beautiful designs and instructions. I just don’t know how to get started even though I have all the tools😅

[@chadssilversmithing]

Hello Lauryl:). Thanks for the nice comment! If you go to the playlist page, there is one dedicated to bracelets. What sort of torch are you using? If you are making big bracelets, it helps to have a hotter torch.

[@lauryltedesco3436]

Hi Chad! I have a large-several actually-but they are butane. It’s does really well for brass and some simple, simple soldering I’ve tried. I have also done the pmc sterling silver and it works great for that I’m just not a fan of the medium. I also have a plethora of tools and supplies-most of the big tools I haven’t even take s out of the box lol. But I’ve been making jewelry for years so I do use the dremel, flex shaft etc. I have watched your bracelet videos-over and over😬. I guess I’m just afraid or don’t know how to get started? Thanks so much for replying and you’re calming and funny tutorials-you’re an amazing artist! And you are so right when you say we’re our win worst critic! Take care:)

[@pakabugga69]

Love it. my kinda piece. thanks

[@chadssilversmithing]

Thank you Ginny!

[@sheila3845]

I was told fine silver does not need pickling like sterling silver 925 Is the true?

[@chadssilversmithing]

I never use just fine silver alone, so that is a good question. I tried to find the answer with a casual search, but was unsuccessful. You might try one of the jewelry forums like Ganoksin. There is probably someone there who would have your answer. Perhaps someone who sees this question in the comments and knows the answer could address this. Anyone?

[@Junoshelly]

As fine silver doesn’t tarnish, it’s not necessary to pickle after annealing, but if you have flux burnt on from soldering, you may need to pickle to remove that. Flux will spoil your tools if you don’t.

[@JJMBARS]

Awesome work friend!

[@chadssilversmithing]

Thank you John!

[@karlhermansen9119]

Beautiful ring!

[@chadssilversmithing]

Thanks Karl!

[@Aelawen]

Awesome design!

[@chadssilversmithing]

Thanks Aelawen! I was pleased with how this one turned out:)

[@v65sabreking]

So nice

[@chadssilversmithing]

Thank you Sabreking!

[@Gazz_R]

That's a work of art! Thanks for sharing Chad and have a fantastic weekend.

[@chadssilversmithing]

Thank you Gazz! You too!