Make a Metal Cuff with Pepetools Superior Ring Bender

  Рет қаралды 28,627

Melissa Muir

Melissa Muir

Күн бұрын

Пікірлер: 24
@JayDub_143
@JayDub_143 4 жыл бұрын
Would LOVE to see how you added the embellishment to the cuff you used as a template cuff. Stunning!!
@Dharlanna
@Dharlanna 9 жыл бұрын
Hi Melissa, I just purchased this tool from Otto Frei and they now carry it with the nylon parts as well. I thought you'd like to know. Thank you for this, it's certainly what made me want the tool. :)
@MelissaMuir
@MelissaMuir 9 жыл бұрын
Oh that is great to know. Thanks. :)
@PepetoolsUSA
@PepetoolsUSA 9 жыл бұрын
Debbie Minter Thank you for purchasing! -Pepetools
@Dharlanna
@Dharlanna 9 жыл бұрын
+Pepetools Thank YOU for making a great product and for adding these mandrels to it. Also for supporting people like Melissa so we can see how to use the tools! =D
@bobbybrown9559
@bobbybrown9559 8 жыл бұрын
Great video.....could I use this tool to make 8 gauge and larger sterling silver round bracelets? Or would you recommend something different?
@michaelma6623
@michaelma6623 4 жыл бұрын
as usual a great over-view..
@cherylthomason4107
@cherylthomason4107 10 жыл бұрын
Hi Melissa, thank you for sharing your video's. I have learned so much from you, I am new at making flatware jewelry. Do you have a video on soldering silver plated flatware ? I see these hearts and crosses that are being made from the handles, can you please share how they are doing this, like do you use silver solder on the plated flatware? Cant wait to hear from you :)
@MelissaMuir
@MelissaMuir 10 жыл бұрын
Cheryl, Thank you for the feedback. I don't know that I would ever try to solder on silver plated flatware. The reason is because you don't know what the base metal is. It is not even recommended that you heat the plated piece as it can put off quite toxic fumes. Now, if you find a sterling silver piece, that is a little different story. I have no problem heating or soldering onto a sterling piece.
@prosperity.
@prosperity. 5 жыл бұрын
Really good information!! So only sterling silver .
@moiradonovan9214
@moiradonovan9214 10 жыл бұрын
Thank you Melissa! I am purchasing this ring bender and do not see the nylon round die you have for shaping the metal against the nylon curved dies. I see on your work table what appears to be a set of round nylon dies. Did you order those separately? I am not seeing them with the Pepe bender. So appreciate your video and time!
@AlwaysMetaling
@AlwaysMetaling 5 жыл бұрын
Moira Donovan Me too, mine didn’t come with the round nylon insert, only the nylons outside forming pieces. ??? @MelissaMuir?? 😎👩🏼‍🎨🌵🔨
@AlwaysMetaling
@AlwaysMetaling 8 жыл бұрын
hi Melissa, great video as always. Thanks. Does this work harden the cuff as well? What is the smallest gauge metal to use for a cuff? Thanks so much in advance.
@MelissaMuir
@MelissaMuir 8 жыл бұрын
+Bobbi Benton-Stewart yes. To a point it does work harden, it depends on the thickness of your metal. I don't like to use less than 22 for cuffs and 20 or 18 gauge is my go to.
@blakewulfing3555
@blakewulfing3555 4 жыл бұрын
Where would I get this bender
@MelissaMuir
@MelissaMuir 4 жыл бұрын
There are a number of places you can get them, www.ToolCandyStore.com is one (that is Micro-Tools.) But I would consider looking at the Durston option as well. I really like it a lot. The finish is a bit better in my opinion. tidd.ly/2ITFkKB
@janeberse6210
@janeberse6210 5 жыл бұрын
Love the video. Also love the silver bracelet on your left wrist. Do you have a tutorial for that or a resource on how to construct it? Thanks!
@MelissaMuir
@MelissaMuir 5 жыл бұрын
Thank you. Yes, I do have a PDF Tutorial on that, but it isn't listed yet. And I am working on a video workshop showing how to make it.
@lighto999
@lighto999 7 жыл бұрын
can i bend thick 3-4mm sterling silver?
@MelissaMuir
@MelissaMuir 7 жыл бұрын
According to Pepetools, you should limit it to 16 gauge Which is about 1.3mm. Now having said that, I have bent 6 gauge wire (which is about 4.11mm) with the ring bender. It must be WELL ANNEALED. I make certain that the metal is quite malleable. I can only do a little bit with it before it becomes too stiff and must be annealed again. The important thing is to not apply too much force.
@prosperity.
@prosperity. 5 жыл бұрын
It'll be nice if pepe tools can just make a bracelet bender 💡
@MelissaMuir
@MelissaMuir 5 жыл бұрын
I have been bugging them to do it for years. It is one of the things that is on their prototyping list.
@prosperity.
@prosperity. 5 жыл бұрын
Beautiful!! What about a ring and bracelet combo.. that'll be great.
@prosperity.
@prosperity. 5 жыл бұрын
Your not able to manipulate harder metals with your hands .
Fast Way to Make Bands Using a Ring Bender
15:06
GomeowCreations
Рет қаралды 68 М.
路飞做的坏事被拆穿了 #路飞#海贼王
00:41
路飞与唐舞桐
Рет қаралды 25 МЛН
If people acted like cats 🙀😹 LeoNata family #shorts
00:22
LeoNata Family
Рет қаралды 40 МЛН
Making Rings with Cutlery - Ring Bending Tool
9:21
We Build Stuff
Рет қаралды 39 М.
Forming a Fluted Cuff Bracelet with Bill Fretz
12:47
Rio Grande
Рет қаралды 70 М.
Make a Spoon Ring with the Pepe Superior Ring Bending Tool
16:27
Melissa Muir
Рет қаралды 678 М.
My TOP 25 tools for jewelry metalsmithing at home!
11:44
The Art of Metalsmithing
Рет қаралды 32 М.
I turn metal waste into jewelry - jewelry out of waste
10:46
Pepe Tools Superior Ring Bender Demo & Review in HD
9:37
Celtic Dreams
Рет қаралды 231 М.
How to Use a Pepe Tools Ring Bender | | Metalsmith Academy
4:17
Lucy Walker Jewellery
Рет қаралды 11 М.
Soldered silverware hearts, Flatwearable Artisan Jewelry
22:24
Flatwearable Artisan Jewelry
Рет қаралды 52 М.
路飞做的坏事被拆穿了 #路飞#海贼王
00:41
路飞与唐舞桐
Рет қаралды 25 МЛН