Why NEW Brakes making Noise or Wobbling and Squeaking

[@amandeepthakur1524]

Love the background music. Felt like I was changing my breaks in front of the Taj mahal ❤❤❤😊.

[@jaivirk8156]

Lmaoo😂

[@saleemdesai4708]

Also a cheap quality pad or disc can create that squeak

[@yvonnewilliams8800]

My daughter just purchased new pads and rotors and the guy left the plastic label on which clearly says remove plastic prior to assembly. And instead of using the new hardware that came with the new brakes, he put on the old hardware. Having to return both and get it redone.

[@newbluerugby]

He didn’t put on the old hardware lol he never took it off

[@shinekthomas1979]

Mine is making squeaking noise after changing break pads. but, not always, only sometimes. what might be the issue? do we need to worry about this? Thank You

[@navneetupadhyay8983]

Same issues I went to service station noise gone after few km driving it’s reappear again break are making noise specially when do light breaking .

[@mitchfortson8413]

Mine doing the same thing brand new breaks and rotors OEM specs and barley put pressure and sqeeks , it's say normal for a few days but annoying especially after spending 600.00 dollars just for front . Vw

[@lance-biggums]

Check the rotor backing behind the rotor it's s sheet metal plate that can get bent out of shape and rub on the back of the rotor. If so just pry it back away from the rotor.

[@chunchecris]

Rubbing on metal

[@Mames5537]

I had air in my brake lines which would make random noises even after I park. Just bled the brakes to fix that problem. Fluid was pitch black. No more random noises 😂

[@jonathanr2417]

Thanks boss. Good tips and straight forward.

[@charlieboy6885]

Brake pad❌ brake shoe✅

[@RodrigoRodriguez-ri7wn]

Why does my 2019 gmc make squeaky noise when I’m driving off sometimes and makes a big squeaky noise when I reverse?

[@GirthosaurusRex]

Bearing

[@stlguy187]

I get squeaky sounds while I’m driving only stops when I apply brakes

[@dippal4904]

😂😂

[@bapebusta338]

did u ever figure out the answer i have the same issue

[@HateTheIRS]

@@bapebusta338bro same ong

[@andywiththebubba]

@@bapebusta338same I got that too excepts it’s scrapping noise

[@thePavuk]

stuck caliper or bad axle bearing

[@KNg-pt8wf]

Those are not shoes. They are brake pads! The shoes go with the drum & wheel cylinder.

[@homerolara6383]

That was the first thing I noticed in this video, other than that not a bad video.

[@alan_cerimovic]

😂 3 minute video that could have been a 10-second video Cliff notes grease it up you're good to go thank me later for saving you 3 minutes of your life

[@tarenandherkitties7524]

Three minutes is a very short time and it's good information for someone new to car work.

[@newbluerugby]

I never put the pad pins in , they’re worthless

[@Quackk_Addict]

which kind of grease though? lol

[@runfargetlost991]

Loser

[@MillionDollarDream]

@@Quackk_Addictdiddy oil

[@nicholassharp8691]

Mine are getting really hot and wobbling. Every one of them. Maybe the rotor is causing it?

[@thePavuk]

if all make problem, it could be in hydraulics way. Bad liquid, air, or something worse

[@daddy-bm7eu]

I already grease those parts clean the pads and still squeaking

[@daddy-bm7eu]

@shoneast6880 thank i will buy new one they look slim

[@InexplicableBill]

Do you have shim plates on both pads? That's what causes squeaks. Missing or improperly installed shims.

[@Zeek800]

@@InexplicableBillbingo. Also apply a thin layer of brake grease on the backs of the inside and outside pads where the piston ( on the inside ) and the calliper on the outside pads contact the pads. No need to go crazy with the grease and on any area on the brake mechanism that has a rubber boot or seamless etc. use silicon brake grease only.

[@jamesyee4143]

Nice tip! What's the best grease to use?? Thanks 😊

[@DoItYourSelfDude]

I wouldn’t use any cause u may get some in the pads and rotors

[@papapaupapapau8217]

Would like to know if it's basic?

[@ferntube187]

What did you do spray with wd-40?

[@ppatel8774]

Music they play when I wait for my Indian takeout food 😂

[@joseplaza3934]

Got my new brakes and rotor. But now it makes noise when releasing brake pedal. Took back to shop and they said they couldn’t find noise 😑

[@scarce911]

My stepmother's civic does that... squeaks every time you release the brake pedal. It might only happen when they're hot? Maybe it's why they couldn't find it

[@MyYaset]

Damm this really work i was going crazy trying to find out what it was

[@theniceneighbor]

What's up with all that grease over everything.

[@DoItYourSelfDude]

Grease isn’t needed

[@InexplicableBill]

@@DoItYourSelfDude I think he means all the components shown behind the hub. All the suspension components look shiny as if there's brake fluid everywhere. What in hell happened?

[@gianthills]

just got new pads and rotors and hear a very faint squeak.

[@dominicesposito4394]

Same 😒

[@Androth12]

Most of the time, it’s foreign material in between the rotor and pad. Especially when creeping or going slow. It’s fcking annoying, but I’ve had to take them apart, the the surface of the pad and rotors.

[@AriesSentient]

​@Androth12 that might be my problem I just bought a new car 2024 and it started squealing when I go slow so ill have to check it out

[@theconsciousmovement9669]

The brake pads shouldnt be shaking

[@anwaralibana6786]

Please more details

[@DoItYourSelfDude]

@@anwaralibana6786 watch my latest video

[@romeoguitar]

My BRZ brembo brakes make noise 😢they say its normal

[@kkhhlee]

Thank you

[@justarandom3865]

mine squeaks when they get hot maybe 5 mins after driving

[@BH-tp3pm]

Still not quite sure where I need to grease after watching this….

[@gooby1494]

The tabs on the pads have tabs on the end that make contact with the brake hardware. Grease the tabs on the pads and where it contacts the hardware. Hope this helps

[@BH-tp3pm]

@@gooby1494 it was sarcasm…

[@gooby1494]

@@BH-tp3pm womp womp

[@alphadog1961]

Never touch your shoes...or in my case,Work Boots !

[@Tanquesito_3m]

Mines only squeak in reverse

[@crvdudecrossoverr6367]

this didnt explain anything about solving the problems. you kept repeating yourself at least 3 times. a simple heres what you do...BOOM done.

[@Jacob1986]

Mine worked good after i greased them after it started again to rattle and clunk

[@waqasjaved2480]

Everything was basic 😂

[@CamPee-y6c]

said a whole lot of nothing