Making a Chain from a PVC Pipe

In this DIY video, I show you how to make a chain from a PVC pipe.
It's easy to do do and can be used for various projects.
All you need is a piece of a PVC pipe, a cutting tool (e.g rotary tool, saw, pipe cutter), sandpaper or a sanding tool and a blade that can be heated up.
I attached the blade to the soldering iron to heat it up, but you can also use a candle or a blowtorch.
◆Subscribe | Make sure to click on a 🔔| : goo.gl/PZYh8d
☎ Business Inquiries: goo.gl/xPwVeP
------------------------------------------------------------------------------------------
⚠WARNING: Use this video content at your own risk.
-----------------------------------------------------------------------------------------

[@Vkalns]

Welcome back my friend. Hoping for regular videos as it used to be. I'm loving the end of the video with different characters 😁😁

[@ShakeTheFuture]

Cheers Pal! I bet only a few people watched the video until the end to see it :)

[@shaikhskalander9455]

Un

[@aryanquentin6301]

Not sure if you guys gives a shit but if you guys are stoned like me during the covid times you can stream all of the new movies and series on instaflixxer. I've been streaming with my brother during the lockdown xD

[@jasonbrandon8873]

@Aryan Quentin yea, I have been watching on InstaFlixxer for months myself :D

[@wyattzain5486]

@Aryan Quentin yup, I have been watching on instaflixxer for since november myself =)

[@ShakeTheFuture]

Wow, It’s been more than a year since I published a video on KZbin. I was thinking to upload a video explaining why I have not published a video for more than a year, but I realised that there is no need to make a separate video. All I can say, I took more than a year off KZbin because it was the right thing to do. I was totally disconnected from the channel, I have not read a single comment or message for more than a year. So, if you left a comment or message, I am sorry for not seeing it.

[@DinobotTM2]

Hey, we all need to take a break sometimes. Good to have you back.

[@ShakeTheFuture]

Thanks!

[@ShakeTheFuture]

I am sure there will be more PVC stuff. Cheers!

[@josyaguiar8623]

Nice. Thanks for sharing It.

[@aprilprenesti8942]

I like it😊

[@iawag]

I’m so happy to see you’re back! I cannot wait to see more of your creations!

[@brucea550]

Neat video, found this on Pinterest, expected some lame ‘hack’ but this is cool! Just a caution to anyone cutting and heating PVC- The respirator he wears is important- protect your lungs. Also have GOOD ventilation when heating/welding it. PVC is polyvinyl chloride, and when heated makes chlorine gas, which can kill you.

[@gopalarao99]

Glad you are back .we are also happy to see how you make a chain from a pvc pipe .🙏

[@torur_ptur_fan1236]

Welcome back brother! Its been lonely without you

[@ShakeTheFuture]

Thanks!

[@brazilcreative1063]

Show 👍🇧🇷

[@prasanthmp3299]

Nice

[@anubhavbatra]

Missed you😭😭😭😭...... love from india 🇮🇳... your fan fidget spinner giveaway winner♥️♥️

[@rajasegarrock4017]

Super

[@BikinAjaBarengBareng]

Very interesting idea, I will try to make something like that in MY NEXT VIDEO., thanks dude

[@gardeningdianne]

At the end, you say 'what should I do with it"? I reckon you could pull the chain apart, make them round by heating them up, then connect them all together to make a straight piece of pvc pipe. Just kidding. I loved your video and will be looking at more of your tutorials. Well done.

[@annasali8062]

now I have to do alot with it :)

[@ChristosPanagoulopoulos]

HE IS BACK!!!!!!!

[@nenadjebiv8316]

The legend returns 😁

[@fixitman347]

HEY DUDE!!!!!!Awesome to see you back. I was thinking the worse. I am so glad you are here. You were very missed by us all.

[@henryecheverria239]

Gracias felicitaciones y siempre adelante

[@NickDClements]

Welcome back! I was literally just thinking about your channel yesterday. It's great to see a video from you again.

[@ShakeTheFuture]

Thank You Nick! I am happy to be back.

[@ilhamjanuri]

Awesome 👍👍👍

[@asamamari]

اهلا بعودتك

[@rodrigoreis51]

Nice to see you back

[@nathanking9771]

Excellent!

[@TemperedStorm]

Yay! Another video! Welcome back!

[@ShakeTheFuture]

Thank You!

[@manojvalayanad.]

Best wishes for U and your channel.

[@ShakeTheFuture]

Thank You!

[@rafee9442]

It's been a long time, glad to have you back!

[@ShakeTheFuture]

Thanks! It's good to be back.

[@snowballs159]

hell yeah you are back

[@nagabushananittur5086]

Very nice and good innovative ideas with adoption.

[@AbdulAwwalQuranwala]

great video thanks

[@egyptmachine]

Don’t explain yourself man, glad to have you back making cool shit. Have a good day!

[@ShakeTheFuture]

Thank You!

[@carelessfox1258]

u did magic lol........its amazing....

[@MCsCreations]

Fantastic job, dude!!! 😃 Some tips (I guess I even already told you that, but either way): you can make PVC sheets from PVC pipes. Get a piece of around 300mm (30cm), make a cut vertically and put it in the oven at 200°C for about 5 minutes. It's going to be really soft and moldable... So you put between 2 flat surfaces with some weight over it. Then... You can make lots of things with it. You can heat and bend and so on. 😊 Another tip is that CA glue is amazing with PVC. You don't need more than it. 😊 Anyway, for example, I was upgrading a toy grade rc car to hobby grade the other day... It's a really old rc car that I found and bought used. So the plastic is a bit brittle and I ended up braking the steering brace. 😕 What I did was to glue it temporarily, put over a PVC sheet, marked around it and cut. Done. 😊

[@ShakeTheFuture]

Thanks! Yeah, PVC pipes are amazing! I have never tried CA glue with PVC, will give it a shot. Cheers!

[@abdulromero3958]

Que pegante se puede usar para unir... Quiero hacer una mesa pero con PVC pero moldearlo estilo madera

[@MCsCreations]

@@abdulromero3958 Super cola mesmo, AC glue como os americanos chamam. 😊

[@RajivKumar-uf6oi]

Exilent.i dont no why people give u a thumsdown for this.

[@janisbertmanis8468]

Wow! Apsveicu ar atgriešanos, gaidam vēl...

[@xikes]

Yeeah! Welcome back!

[@sandralavinia5908]

Welcome Back!

[@evren.builds]

Happy to have you back! I could not find a way of reaching you and asking if you were okay ^^

[@ShakeTheFuture]

Thanks! Yes, I was kind of ignoring social media world for a year, so it was difficult to get in touch with me.

[@arckocsog253]

We missed you. I didn't unsubscribe :)

[@glendagonzalez7578]

HILARIOUS ending

[@gertkriel5764]

Long time no see, glad to hear from you again!

[@ShakeTheFuture]

Indeed, long time no see :)

[@exequilpacaldo1797]

Woow

[@pogba879]

Would you say that i am your no. 1 fan

[@ShakeTheFuture]

Thank You!

[@Bhatti_edits_]

Cool

[@calonico9470]

Amazing! Great to see you again amigo! Upload more stuff! 😎🤘

[@ShakeTheFuture]

Thank You Calo!

[@Grizzly_Lab]

Nice to see you back, and with an interesting idea, obviously 🤔😍🙃👌👍

[@ShakeTheFuture]

Thanks Grizzly!

[@i.g.noreme825]

Great to see the diy king back! I'd like to ask about where you've been but surely you've just been busy with work, studies and/or family. Now the important question is are you here to stay or is this just a video you could make even with whatever you were busy with. And about the chain: it looks good for decorating or cosplaying. Just needs a bit of paint. It could probably even be used with self-made pvc gears although I doubt if such a system would be good for anything but looks.

[@ShakeTheFuture]

Thank You! Well, actually this video was uploaded a while ago, I just did not publish it. Now when looking at it again, I have some new ideas, one of them was just like you said - paining it. We'll see if I do another video PVC chain related video or not. I am here to stay at least for a while. I have more videos that are uploaded, but not published and videos that I am still working on. If in one of the videos you see me with a long hair and no beard and in another without a hair and skinnier, that's because some videos where shot a while ago :)

[@merxeverazvi2725]

Genial!!

[@ShakeTheFuture]

Cheers!

[@halldorsolvason9616]

aaaaaa yeeeaaaaaaa

[@CanalLegallega07]

Legal!!!

[@gunprakashsharma1911]

Hey great creator please make new videos please please please

[@pogba879]

I love your videos, nice to see you uploading again :)

[@ShakeTheFuture]

Thanks a lot!

[@torur_ptur_fan1236]

@@ShakeTheFuture Hey boss I have a cancer

[@StephanieElizabethMann]

If there is a way to put teeth on or in a larger piece of poly pipe this chain could be used to connect two cogs. One cog turning another via a chain is a machine.

[@shadabmushaddab]

Hi bro, it's been a long time for the last video, I hope you are fine and very happy to see you come back 👏👏

[@ShakeTheFuture]

Thanks a lot!

[@LesTutosdUneMinute]

Laipni gaidīti!

[@themightybullmccabe]

YOURE ALIVE?!?!

[@tanmaykhanna5807]

After a long time huh

[@ShakeTheFuture]

Yeah, it's been a while :)

[@tanmaykhanna5807]

Keep posting

[@dontworryaboutit8445]

😩😭😭😭i missed you

[@gettogoo]

Dude where have u been u okay ?? Welcome back friend

[@ShakeTheFuture]

All good. Thanks, it's great to be back.

[@josejoaquintrujillorios5199]

Ok

[@halldorsolvason9616]

more video

[@jmelb4650]

I hate the dust from pvc pipe on my hands and cloths, very annoying to remove.

[@pappydubey1253]

PVC Pipe and child launch please

[@He11cth3r3]

I made a ring 😂

[@user-og8gl9hu1p]

мммм да(

[@MarmadukeDormedius]

Bruh it's been a year

[@user-wo2sb5uo4g]

Гофру от унитаза забыл подвесить...

[@ohiggins1879]

Y para que sirve esa huevada??

[@ayazshaikh1449]

Most useless thing

[@pugalstech]

Nice