Making a Gas Vapor Transparent Engine

Let's Learn Something: Project no.40
Enjoy and Stay Safe Guys.
extra 12% off code: letslearn
Toyan v8: bit.ly/43RGBGn
Toyan engine: bit.ly/4696AdX
Stirlingkit Black Friday sales: bit.ly/3sGEiZv
Second Channel:
/ @handsontable5952
Primeweld TIG225 AC/DC:
primeweld.com/products/tig-22...
Primeweld TIG225 AC / DC (Full review):
• TFS: Primeweld TIG225 ... ​
• Playlist for all engine videos:
www.youtube.com/watch?v=u7cwA...
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
HERE: / @letslearnsomething30
#DIY ENGINE

[@kamppaaa]

ive never seen a handmade crankshaft and piston actually work, this is some really impressive work!

[@yonski1705]

Don't forget the camshaft as well...

[@frankdesire3245]

works for the video

[@kamppaaa]

@@frankdesire3245 yeah obviously its not likely the quality of a production engine and it probably doesnt make that much power nor last long, still very cool tho

[@willist.]

Yes, it is a great job, well done

[@espero_dev]

yea but if you push it to its limits its probably going to explode lol

[@kinotransam]

Your talent and ambition to think outside the box and use what ever materials are available never ceases to amaze me. Nice job as always. Thank you for sharing

[@berryrhoden1217]

You definitely need a back flash arrestor between the fuel and the carburetor. One misfire, hung valve etc and you have an instant fuel air bomb with fragmentation. Awesome job making the engine from scrap pieces.

[@gicch]

thats what i thought

[@aSpyIntheHaus]

I just love how run out doesn't slow you down. You just power through it. Square it up and its good to go. Good on you matey

[@aSpyIntheHaus]

I also love how you have taken the concept of 'Air-fuel ratio', broken it down into its most basic mixing principles and made this work. Well Done.

[@LeandroFTW]

The Missouri school system failed me. I learned more about small engines in this clip than I did in a two month class.

[@WilliamHollinger2019]

All american Schools are bad it due to the feds enforcing stupid requirements and dumbing everyone.

[@richiesrestorations4883]

​@@WilliamHollinger2019They need to dumb it down so the illegals can keep up. How's that for liberal logic and making a country strong. I can't believe the braindead things promoted nowadays.

[@Sslayer166]

Man thats why school is useless fr

[@OogaBooga-qs8ns]

Yeah my highschool teaches small engines and they don't teach shit I learn more from working on my mini bike and go-kart. Basic maintenance, performance upgrades, carb tuning, setting valve lash, etc.

[@richiesrestorations4883]

@@OogaBooga-qs8ns There's really no replacement for doing what you're doing working and learning on your own stuff. If you don't know something or figure it out, somebody somewhere has already figured it out and posted it online. I learned to be an OK machinist by buying an industrial lathe and Bridgeport with some support equipment. I've done customer jobs and those machines have already paid for themselves many times over. I like to see younger people get into working with mechanical things. I did when I was younger and I've had my own business since 2000 and my repair shop since 2008. I do collision repair on semi trucks and trailers. Good luck to you and Merry Christmas.

[@jimw7916]

In all the years ive lived in The Philippines ....This is the FIRST genuine engineer Ive ever seen. Superb work. Magaling talaga!

[@kcraig51]

Just getting the cam lobes indexed by hand close enough to run is amazing in itself!

[@vostock0998]

i thought he was filling in some indentations in the rod with a welder. When I realized the guy was actually making the cam lobes i thought wtf

[@asherstevens6320]

hand crafted for maximum precision

[@rot_studios]

@@vostock0998I knoow, big "wut" moment XD

[@TofuArabia1629]

Congratulations kabayan for making 100% Pinoy engine, iba talaga ang galing ng Pinoy. 🇵🇭💪

[@user-tj4ge9mf4n]

Разумная голова!!! Умелые Руки...!!!! Следующий Двигатель который вы сделаете у Вас будет Дизельный ДВС с Форкамерой ... Дерзайте у Вас получится...!!!

[@Lord_AB]

i cant belive that you made evry single part yourself 😮😮🔥🔥🔥

[@mickmuzzmkmz1628]

The fuel air mixing works the same as a bong, with fuel instead of water!😂 Great work though. 👍

[@RFigueiredo169]

Esse cara está em outro nível! 🇧🇷

[@silverjohnson3163]

This is extremely cool!! I love how it doesn't look like your measuring anything in this video :)

[@renevandort7015]

Super geweldig om te zien hoe een motor werkt dat het eigenlijk simpel is. thnx!

[@kerrypierre9494]

Absolutely amazing as always. Your skills are definitely second to none. You are the engine master, keep the awesome builds coming.👌👍🤘🔥🔥🔥🔥🔥

[@joshlorusso3751]

definitely the most impressive thing you’ve done. this is what i’ve been waiting for. this is something i’ve wanted to achieve for a long time but just never had the time

[@mazdamaniac4643]

Interesting thing to note when making pistons: they're not perfectly cylindrical. Because of heat expansion, the piston skirt is actually slightly oval, with the span across the gudgeon pin also being slightly oval in the opposite direction. When the piston heats up to operating temperature, it all evens out and becomes cylindrical. If this isn't factored in, you risk the piston skirt seizing in the bore and tearing your piston in half. This is much less of a problem with air cooled engines though, because their larger tolerances usually make this machining process redundant, so some manufacturers don't bother.

[@bigbadtree]

​@GitsumSaus I was scanning down the comments just to see if somebody else watching knew this.

[@spacee3249]

The custom rings are solid attention to detail!

[@trxtech3010]

Probably the most amazing thing I have ever seen hand made!

[@spacee3249]

That's awesome to see the custom crank, rod, and piston! Makes me want to custom make more than just the cylinders im working on

[@KB10GL]

I looked on in awe when I realised that it was not going to be a two stroke. So, no crankcase as such, so no oil & no precision machining, but for an engine with a very limited run time, & a very limited life expectancy, the crankcase & high precision machining were not really required. Very limited machine tools & hey presto, a transparent engine that actually runs. The carburetor was simplicity itself with mixture control, again, pure simplicity. I love building high performance V8 engines for myself, but this won me over completely.

[@Andy-lh9bc]

You're an amazing craftsman! Awsome build and great video!

[@Prototheria]

I just wanted to know that this is the first video of yours that I've seen and coincidentally, I am dry vaping through a home made bong while I watch. Cheers, fella.

[@SekAustria]

Nice Technique sa Piston Ring Bro!!!

[@letslearnsomething30]

Salamat sek

[@RW-xh3dj]

The making was quite literal, each piece is your own production

[@johnconnolly2474]

great to see a true craftsman at work absolutely amazing

[@mesinmodbus4566]

piston rings and hand numerical control machining cam lobes, amazing

[@rustybum2]

Absolutely fascinating! Thanks for sharing and best regards from Ireland.

[@faballnorth4865]

Absolutely incredible work!

[@rickpalechuk4411]

Your stuff is so cool! Thanks for sharing Cheers

[@DK-jt6be]

This is amazing! Very well done

[@MASI_forging]

Absolutely beautiful work 👍👍

[@invisibleprance3749]

These engine's can't last longer than 5 minutes on transparent 😅

[@Quebecer_Powerstroke]

Incredible as always, greetings from Quebec, Canada.

[@MichaelSteeves]

After seeing this, I have a feeling that he could build an engine that would exceed the power and longevity of the engine on the Wright Flyer -- and be lighter weight!

[@GuildOfCalamity]

Everyone should take a lesson from this guy's editing skills.

[@sunfishensunfishen2271]

I constructed a model like this using a briggs and Stratton at my school. How do you keep the engine running without the heat blistering the acrylic?

[@zainrei4917]

Low compression maybe? He got a thick head gasket plate before placing the cylinder head

[@Nikola12YT]

You are my favorit and you are very honored for this work and this beautiful work

[@fearlessfreedom.......]

Thanks a lot for such informative videos

[@fester73666]

An AWESOME little shopmade engine 👍👍

[@apcoma357]

You are really a brilliant man. Congrats. It is amazing

[@tawanloveyou-mr6dk]

คุณสุดยอดมากๆ 🎉 เก่งกาจ ฉันติดตามจากประเทศไทย😊

[@shawntaylor5690]

Bro made his own carburettor out of 2 ball valves ... This is amazing

[@mechcntr7185]

Outstanding demonstration.

[@batman3698]

Great, bare bones engine build, even a hand made carburettor made from a glass jar. I was a little bit worried about this thing backfiring though, not gonna lie.

[@BossGarage]

THIS IS AWESOME 🤯🤯🔥🔥

[@yonski1705]

You really made an internal combustion engine from scratch...!!! I'm speechless...

[@eric63377]

I like your style. Now it needs a bigger camshaft and a header.

[@jeffbrinkerhoff5121]

Excellent video, very impressive skills

[@PoNo.1]

ฉันชอบไอเดียของคุณมาก และอยากให้คุณทำมันขึ้นอีก❤

[@bembeng475]

Mantap om..salut dengan ilmu mu❤

[@logandriggers1709]

I don’t think I’ve ever seen a better depiction of resourcefulness in my fucking life This dude literally created an entire engine out of scrap metal and spare parts using a drill press and a laythe 🤯

[@haugstule]

you welded next to the magnets, and they still work? 🤔

[@jfolck1886]

I was wondering the same thing

[@UnacceptableViews]

i'd say the weld temps were low or he re-magnetized them

[@adamyusuf5666]

You mad bro, i'll never seen something like this run fckn perfectly 😮 thats awesome 🤔

[@Bourne246]

Hi! Great work you do. Id like to ask if you could try making a 4 stroke rotary valve engine.

[@fabriziopalombo7973]

Bellissimo progetto complimenti 👏

[@giopirmisashvili5514]

Respect ❤❤❤ thank you

[@DOCTRJ]

Nice work 👍🤠

[@stealeethridge7139]

Truly awesome thanks

[@TV-vg8wz]

엔진을 셀프제작하다니 놀랍습니다

[@allanmason7544]

spot on job

[@user-yl9tw7kj6q]

Muy bueno... 🎉Intenta Acer uno de diecel. 👍👍👍

[@xXx-ui8eu]

Daaaaamn cool bro great work

[@vladkamael]

I've been spotting a lot of wrong stuff throughout the video. Like the lack of gaskets, not tappered piston and whatnot. But considering that, it was probably made just for the video and generally the way it was made - still super impressive that it works! Great stuff 👍 Also how much cc is it?

[@IS0162]

Thats amazing 😍

[@erikbraguim4288]

Irmão seus trabalhos realmente são incríveis , parabéns , você pode fazer uma mobilette com esse motor , e só fazer um quadro de mobilette do zero e colocar esse motor , pra ver se vai dar certo , posta um vídeo tentando acho que você é capaz irmao , enfim , parabéns novamente!

[@davidhansen4471]

that is impresive thank you ******* you get 10 stars for this

[@lavoit]

Faz um v8 com esse modelo. Amo esse tipo de motor❤

[@jfolck1886]

What is the cylinder made from? Glass? Cant be plastic otherwise it would melt. Bad enough the clear piece on top is lexan or something

[@geo2cv6tron14]

Really really interesting 🤩👍

[@milujemelegendy]

Nádhera. Toto je věc co musím mít

[@Viraldesa]

Amazing beautiful homade machine 😍👍👍👍😍

[@170Hendrik]

Een vakman aan het werk. Respect daarvoor.

[@IDGAF2298]

This video is nuts man

[@ahmadtzy5967]

4 stroke engine, where is it possible for the fuel inlet and combustion exhaust ports to be combined?

[@Dalorian1]

Thats so bloody cool 😀

[@richardalmodovar5463]

Someone stolen your video. DIY & Craft account using your video on Facebook. Hope you noticed my comment.

[@phuckurpheelings3979]

I'm curious to see the mess a backfire would cause.

[@mehdilajili8912]

Le dan , respect for you 👍💪

[@MZ-eq2ym]

Wow very very good awesome big like you are so intelligent 👍👍👍👍👏👏👏👏I enjoyed

[@1974UTuber]

I always love your videos. But you need to do something about the buzzing, humming and whistling noises that come through when you machine parts. Great project though as always

[@ahmednejjar4663]

t'es un génie mon ami ❤

[@Yansi_Nemo]

Super engine!

[@user-jv3ho1kk2c]

فنان ما شاء الله ابهرتني❤❤❤❤❤❤

[@josh817]

Damn I see all this great machining and then you made the camshaft and I wanted to die.

[@leonardoperez-cb9gd]

Why are the valves on the previous engine at 112 degrees and those on this engine at 106 degrees? by the way very good video

[@user-si1pm2ur1b]

👏 impressionnants 🤯

[@cobymortin1091]

thats amazing

[@anythingwithanengine8736]

Amazing job as always! You’ve turned a gas engine into a diesel, and turned a 4 stroke into a 2 stroke engine, what about building a two stroke diesel?

[@catthecommentbothunter6890]

what about lubrication?

[@victorycalibre9320]

amazing one

[@Fred_Zepplin]

Very Cool !

[@heitorvr]

Like a monster!

[@pauldavidson747]

Can you make a motorcycle powered by a diesel engine? Or use the diesel converted bike engine to power a bike ?

[@helielton1988]

merece um milhao de likes

[@johnwalker194]

Chuck Norris needs his centre punch back dude 😂

[@krushnakatke4175]

Fantastic ❤❤❤❤❤

[@evrenki1]

Awesome, where U learned allthat stuff

[@jemseerj7783]

What is liquid using?