Turn Water Pressure Pump Into 3 Piston Inline Engine

[@letslearnsomething30]

Check Out My Second Channel: kzbin.info/door/GkwX22LmvgxPILwI0u2Ckg

[@BCRVG87]

This was a very nice build. Can you make a supercharger for it out of an old aircompressor?

[@jackalqueenston1175]

trains to drive a tor in V only with the inlet rod control without chain

[@jhanelldonato9513]

Suggestion for future Vlog: Idol ilagay mo sa RC Car na owner type jeep yang makina na yan

[@h3nrique762]

makes an internal combustion engine using a refrigerator compressor and uses an electronic fuel injection system

[@xronotype3167]

you are smart kid build some engine from scraps

[@ethanspaziani1070]

You guys take the weird mechanic projects in my head from my childhood and make them a reality and for that hats off to you guys

[@DrarslanAbdulsattar]

DDETOLL PANTENEE SAFE GUARD NEEM 3/3 H.BOERIIII GEL

[@unklemannysgarage5934]

Cam profiling with a grinder this time. Truly amazing, hats off to you sir! I love the simplicity of the valve train.

[@EliasFazInvencao]

Sem dúvida funciona sim parabéns

[@kasuraga]

I'm convinced this man can turn any compressor into an ICE.

[@Omegadoomship]

This is absolutely incredible! This guy can create a working engine out of just about anything. A pressure washer pump, car ac compressor, refrigerator compressor… like holy crap!

[@rogeriocosta1035]

Should be nice to have this guy as a partner in the science project.

[@HackFeSt1]

Or Post apocalyptic

[@ΑνδρέαςΤερέπεης]

My guy knows how to turn EVERYTHING into an engine, good job!!!!!!

[@alpharaptor7510]

This guy is a freaking Genius. I’m wondering if he could make a Diesel engine out of one of those

[@kai-uweoch1159]

The problem with a Diesel is the high compression you need, I guess. Requires very tight tolerances. But maybe I am wrong…? :-)

[@sahibdipsandhu]

he already made a diesel engine out of an old dirt bike engine.

[@jacobbender5449]

The problem I see is is that crankshaft probably won't hold up to a lot of pressure

[@DigBipper188]

Should be doable if you can get the compression ratio up. 25:1 would be a good starting point

[@pocahontas238]

@@jacobbender5449 its ok, anyway it is only for educational purposes on how the engine is working.

[@russell6022]

Outstanding, imaginative work, excellently done! I didn't think it would take long for the solder on the exhaust pipes to melt though.

[@jblbassslayer3108]

It is a vapor type carburator so the heat that comes from it isn't as strong as a flame torch, that took a pretty long time to melt the solder, if it would be that hot, the cooper would turn black in a short ammount of use time and then would corrode

[@DefenistrationAlley]

I love the repurposing of all the components to build this engine! Impressive manual machining skills as well. This engine bears a bit of visual resemblance to the original Wright Flyer engine... the world's first Aircraft engine.

[@dsnester2754]

I'm so excited to see these keep making more engines and variations

[@oneforall549]

Mind blowing! I was honestly thinking yesterday I hadn't seen you post a video in awhile! So happy to see this! Thanks so much!

[@ShawnRitch]

This is, in my opinion, " The Most Amazing ICE Builds Every Shared On KZbin " ! The complexity of designing & creating all the timing functions( mechanical and electronic ) by hand; And for it to work so well is incredible. Thank you so much for sharing :)

[@SekAustria]

Astig bro!! Idol ko mga rocker arm mo hehe

[@letslearnsomething30]

Thanks ma bro

[@ramchandrasanti7477]

@@letslearnsomething30 ùu

[@catthecommentbothunter6890]

@@letslearnsomething30 gago pinoy pala kayo dalawa🤣🤣🤣🤣

[@vincegreat544]

Sana ol

[@Workshophobby2201]

Ang galing po ni Sir.

[@jessehoeper2674]

You overseas guys have some serious talent👍👍👍 greetings from American 🇺🇸

[@ZoonCrypticon]

With this video I learnt how an engine works. Thank you !

[@carlitomadrona6211]

Running in gas vapors eliminating the use of carburator, nice👍👍👍

[@_NoelNixon]

The imagination and idea by which he made those valves from bolts🤯

[@brookstaylor4748]

This belongs in a museum along with all of his other works of art.

[@danw1955]

Absolutely brilliant! Love the cam profiling tool (angle grinder). It may not run perfect, but the fact that it actually runs is amazing! Probably should have used silver solder on the exhaust to keep the pipe from melting out.😂

[@forwardmotion1883]

Dudes a hell of a machinist. 👍🏼🧐. I still remember the first and second set of valves I lapped 390 ford 32 years ago, and a set of 350 olds valves abt 28 years ago. The time has passed so quickly.

[@jayburrough4308]

I love watching stuff like this it's awesome 👍 great job dude 😎

[@tylerwightman2315]

This dude is a legend in my book, hands down. Great job my friend! Cheers from Brandon Mississippi!

[@1974UTuber]

You are one very talented individual. I always enjoy your projects and videos

[@jlrinc1420]

You are the most creative mechanic I have ever seen. Not only would I have not known how to do most of your projects I wouldnt have thought them possible. You are brilliant.

[@dat9553]

The amount of creativity in this engine is astounding. Good work 👍👍

[@lvd2001]

This is Insane at a different level. What a knowledge of engine ! I am extremely impressed. Salute from a mechanical engineer

[@JazzbLu]

Crude and simple. Definitely not a powerhouse but it runs and that is the main point. Very nice! I wonder how much power it can produce?

[@TSAR2010]

Probably enough to put on a small go kart

[@unvailingtheveilwormwood8185]

Get that motor on a Dino!!! Love to see the horse power it produces 👌 Great Job Sir 😉

[@danielbuckner2167]

The pickle jar atomization chamber was really cool see work that well! Honestly, three pistons, a crank and a crank case and you would have made an entire engine! What I would love to see is a large home built hit and miss engine!! That is a technology that could be useful in poorer countries with limited parts and machining abilities and they are simple to maintain. What would you use for the large flywheel, a tractor tire filled with concrete? A large home made wood wheel with lead slugs to balance it?

[@onekycarscanners6002]

Making one. Some ideas are here could be simplified.

[@badger4510]

Awesome video and thanks for keeping me humble by reminding me of how simple minded i really am! I started thinking i was a little above average over the last few years but now i can't remember why

[@EnsignLovell]

I agree, this guy is indeed amazing. Not only is he talented at making things... He also teaches people without actually speaking, no bs, just cuts straight to the point. :)

[@dontwobble]

nothing worse than a KZbinr who loves the sound of their own voice

[@EnsignLovell]

@@dontwobble Most learn to tolerate it, or ignore it. Few actually enjoy hearing their selves. Kind of like that 1 thing you want to change when you look in the mirror, but you stop bothering after a while.

[@dannyc7659]

Awesome! Thorough knowledge of engine construction needed along with fabrication knowhow in order to achieve something like this.

[@kokoilie]

The part that needs the most precision and engineering was already in the pump, from the parts he made the hardest to do was the piston case.

[@GASSmallEngine]

Great video, my only concern is the soldering vs bolting.

[@georgeblack589]

You could tell he was really running it because the soft solder on the exhaust side melted XD

[@CaptianInternet]

Third Video of your channel. At 1:50 I said:"Huh, I understand what you are doing. And what you are doing is genius!"

[@randommosaic7080]

The efficiency of that engine running in vapour is theoretically possible but you made it man

[@georgeblack589]

Project Farm did a really cool video testing his mowers on a vapor carb. It's worth checking out.

[@htmmotoring]

Dude.. i actually Learn a couple of stuff from this video. That carburetor looks brilliant

[@averageoutdoorsman9342]

I've been waiting for a new video. This is so awesome!! Now supercharge it. Doesn't look like it would be too difficult. Toughest challenge would be incorporating an intake manifold.

[@valentinmelendez8650]

This guy never fails to amaze me keep up the good work 👍 I also wanted to point out that the engine that he built looks similar to the engine That the Wright brothers used in their first powered aircraft

[@type2523]

I love this channel , he makes the impossible possible

[@iiyaba9926]

Very good vaiya ,amader aro new abisker dekan , please

[@AK-Star007]

now this is something we dont see often , great keep doing new stuff

[@cptrikester2671]

Totally amazing. AGAIN. There may be things I would question (solder on exhaust manifold), but his ability to make a running engine is not one of them. NEXT: He makes a jet engine from a rock. 😀

[@TrippLilley]

31:05 when the exhaust pipe falls off 🤣❤️ (but still an amazing build)

[@GASSmallEngine]

The MacGyver of the new age hehe

[@gullkyper7808]

dude you are totally awesome. you even managed to do without black and blue smoke. great respect

[@tachankafreeman3442]

dude this guy can make anything into a combustion engine. and it's empressive

[@jakefriesenjake]

And you can turn half of your engine into an air compressor for your air ride suspension, if you want!

[@koaasst]

i LOLed when the exhaust pipe fell off. very cool build

[@an_what]

Pretty damn amazing and it's just running off the fuel vapor which is a + 💯

[@melchortungol4019]

the real clockwerk engineer..I salute you sir !!!

[@benonsudha352]

I didn't imagine... Great job u done... Wonderful designing..

[@SilentGamer-jt8dl]

Very Impressive work, cant get over how well it ran at the end

[@cristobalestevez1865]

Me alegro mucho de que haya personas con una inventiva tan buena. Un aplauso para ti

[@nuneze2008]

Wow I can't believe that actually works, you're very talented.

[@OMosca]

Parabéns ótimo trabalho sou brasileiro 🇧🇷🇧🇷🇧🇷🇧🇷

[@emanueldailanevieira8725]

Eu também

[@davekauffman8727]

You are a talented machinist, and an exceptional engineer, very impressive!

[@ezequielsilva2709]

Isso é incrível, parabéns 👏👏

[@helielton1988]

mano, esse cara é um engenheiro!!!!!!!!!

[@hulkgqnissanpatrol6121]

You are absolutely amazing to watch! I hope and wish in the future you can get a small engine dyno. I bet again we'll all be astonished and amazed! 😅

[@Cking880]

Freakin awesome man....love to see you do a v6 or v8!!!

[@yourlocalrussiankid9162]

bro this dude should make homemade drift cars and and then race them, this is insane this guys has masterd the art of mechanical engeneering

[@Vladeg]

То что ты делаешь-искусство, причем величайшее

[@kwgaming6175]

This guy is a genius. I think this would be cool to see on a motorcycle or a motorized bike of some sort

[@DavidByrski]

This is extremely amazing. So much talent 👍🏻

[@cerveauy8782]

Merveilleux !! Probably another one of those genius Indians 👏

[@AltenVergaser]

Another interesting creative engine model. Keep up dude i love your videos.

[@malakahmad7136]

you are not a mechanic you are the great scientist Allah kary tum apny jesy bohooot students ko tayar kary pakistan will pride if you genius brother

[@valmorpedroplaten2928]

Show ficou muito legal parabéns 👏

[@johnlaccohee-joslin4477]

Hi, i am so glod fhat you stayed with it and did not give up. I think i told you that you should try it on two stroke mix that seemed to work even though its a fourstroke. I dont know if you changes the inlet and outlet ports but it seems by moving then a fraction it proved to be sucsessful, i bet you are very pleased. Now all thats left is to get rid of the smoke with clearly is just too much oil about in the chamber. Well done i was pleased very much to see it fire up and run smoothly.

[@keeper__88_]

As a proof of concept it works, and its outstanding. Great work, you are inspiring, my dude :D I´d love to see a L4 engine with oil for the cams and a full enclosure, to have of course a proper oil circulation and extend the life of the engine. And, just out of curiosity, how many CC this L3 engine has?

[@pintobengkel8112]

Hadir nyimak boss ku suksesselalu buatbossku 👍👍👍💪💪💪

[@chrisnielsen5467]

Amazing as always! I don't think you know how to disappoint!

[@georgeblack589]

I was certain this was going to be fake garbage, but was very pleasantly surprised! Great and clever work!

[@erikbraguim4288]

Irmão parabéns vc e muito inteligente , gostei muito parabéns mesmo

[@goboyz8016]

That is amazing. Awesome job. I kept saying no way that should run but it does and in truth has too. Crazy. Well done.

[@rotax636nut5]

The connecting rod mods were a bit of a shock

[@StratocastRS]

Shock for me was the welded cam. how do you just go at and get the position, timing, etc correct?

[@fullmetaljacket7]

@@StratocastRS it's not rocket science, and in this case it doesn't have to be precise. If it runs it's good enough. I'm sure it's a lot harder actually welding it together than figuring out the cams position/profile.

[@steve5912]

@@StratocastRS yea I don’t understand the cam

[@ernestbarcella175]

When the imagination and skill has no limit !!!! 🐔🦆🐞

[@davelowman8063]

I want to see him make something that puts out mechanical work. And self sustained charge.. No doubt this dude is really smart and talented in machining and small engine theory but to see it run under a load and sustain would be really awesome and could be a big money maker for him

[@10010Linus]

He made a motorcycle with the twin cylinder v compressor engine he made a long while ago

[@mreza84]

Very resourceful dude 👍

[@marivaldooliveira8441]

Impressionante,cara . parabéns engenheiro

[@Лимонлимонович-ф6я]

Определенно круто!

[@robert_0505]

With no cooling at all how long can it run Plus the vapors cant cool it down But if it was direct injection the gasoline splashing on the cylinder walls would cool it to some degree.

[@warrenfloyd1484]

Wow! Nice! The compression ratio has to be 20to 1 or better👍

[@mohammedbilal3580]

the most intresting vedio on youtube, you are the man .

[@rangganasution4296]

let's make a 4 cylinder engine and feel the sweetness of the sound

[@legowarriorsadventure3613]

Could you turn one of these small pumps into a Diesel engine by any chance?

[@ethancoy9237]

not likely, diesel engines require rather high compression ratios, much higher than any petrol engine, the connecting rods (at least put together like this engine was) would be to fragile to handle that, the construction of the engine would have to be far, far better than this one for that to happen, if you could get it to run it likely wouldn't last for very long due to the stress on the components

[@garajedelseba3152]

You re the Best homemade engeneer that i saw in My Hole life, the next, make a turbocharger into a reactor engine, like the engine that use the air forcé plane, u re My hero bro

[@aroncharlwood1777]

I've think you've done just about everything can you turn a hydraulic vane pump into an engine that would be a tough one

[@joeh5428]

Very impressive 👏 dude

[@СемёнСавельев-м6й]

hi,try to make an engine from a zil 130 compressor, it would be very interesting

[@pzm4420]

🤣🤣🤣

[@СемёнСавельев-м6й]

@@pzm4420 ну а чё прикольно же,потом всунуть в зил и получится бензиновый пускач

[@thebrokeway9838]

2 videos later realized i forgot to like this video return of the batman thanks for the video your are amazing!!

[@eddycahyonoyoutuberbabulu]

Keren, sistem pembakaran yang unik👍👍✔️

[@drwidiyanto3523]

You are too genius dude 😍😍😍 Maybe u can put alternator on it for next project & running it as long as possible.

[@faridrafieuddin4928]

Opportunities don's just happens, you create them. Just one small positive thought in the morning can change your whole day. Awesome invention 💖

[@dineshsoni405]

This is amazing and top class engineering

[@bsggaz4732]

this isnt just a skill this is a masterpiece

[@taylandotv9074]

Galing mo naman talagang di magpapatalo Ang Pinoy sa pagimbinto iba talaga Ang Pinoy salamat sa Dios sa mga kaloob sa atin ng mga talino salamat Po sa Dios.

[@charlescraib6761]

What a good video to watch pure genius at work

[@theunknownandunsolved6963]

For some reason i picture this dudes car having a crazy homemade engine sticking out of the hood. XD

[@chris17cdti]

Engine's completed it mate 👍🏼

[@aldosorgentini]

you are amazing dude !!! i would like to see all the fails and trys before get it run

[@gusttavovincent2t582]

Dude you inspire me, I'm following you, and I've been creating several ideas, congratulations!!

[@By_Da_Production]

what an amazing discovery, very creative friend

[@rebernard82]

this is a work of mechanical art. awesome build man

[@udintheexsperiment7037]

King of handmade engine. Iam from indonesian following you master😊