Making a UV laser pointer

If you want a burning laser, the best places to look are in Blue-ray BURNERS. The 16x ones are the best from what I've read. I used a Blue-Ray READER in my video so it didn't have that much power.
Most lasers you will find will want to be powered by 2.5 volts at 100 milliamps or so, but that varies with the laser you are working with. With Blu-Ray lasers you could expect to power them up to 7 volts and 400 milliamps. Generally, I shoot for 3 volts at 300 milliamps for my test circuit and then go from there.
DC-DC boost converter: www.ebay.com/i...
Lithium Charger: www.ebay.com/i...
Music: Mich - Sea of Envy
Help support me so I can make more videos:
Twitter: / sirspunk
paypal: [e-mail]
streamlabs.com...

[@aps8446]

More like a 405nm violet, visible laser

[@TinLethax]

I suggest you to use the laser housing 12mm. It easier to mount laser diode.

[@TinLethax]

also the laser diode .the cheap diode that can burn things is around few bucks in eBay. Just search for SLD3232 it's Sony bluray diode.

[@thevoidedwarranty]

Based on beam output pattern, while you were adjusting the voltage you killed them all .

[@Haydy5040]

my 808 nm laser is visible though it is very faint because our eyes have such a low sensitivity to IR though it is visible in bright sources and lower wavelengths. The diodes used in green lasers are 808 you can make one by removing the crystal that converts it into green light. UV is similar and looks like a faint blue I have heard.

[@MrHellishghost]

Great video man! The laser pointer made from the blu-ray laser its invisible to the naked eye? What's that red glasses that you used at 9:09?

[@user-pb4jg2dh4w]

I've already subscribed

[@Threadripper147]

dvd recorders is well known to contain powerfull enough diodes to burn