Making a Vintage Ratchet Wrench for Threading

In this video I'll make a Vintage Ratchet Wrench for Threading.
I hope you like it! If you have any questions on the used tools, materials or the processes, write it in the comment section - I will try to answer as soon as possible!
If you want to support my channel hit the like, leave a comment, subscribe and share my work! Thanks for watching!
Check out my videos:
• I Turn Stainless Steel and Bronze into a Folding Cup →→→ • I Turn Stainless Steel...
• Making a Crazy Part on the Lathe →→→ • Making a Crazy Part on...
• Turning a Cube on a Lathe →→→ • Turning a Cube on a Lathe
• Making a Machinist Hammer →→→ • Making a Machinist Hammer
• I made a Diсe from steel and brass leftovers →→→ • Crafting Your First Di...
🔔 Subscribe Now 🔔 to our channel and turn on the notification bell. Join us on this exciting adventure as we unravel the magic of metal, machinery, and artistry.
#lathe #lathemachine #lathework #latheturning #metalworking #metalcrafting #diy #howitsmade #MetalArtistry #TurningMetal #MetalShaping #DIYCraftsmanship #LatheSkills #ArtisanCrafts #turningwood #carpentry #LatheSkills #ArtisanCrafts #turningwood #carpentry #lathework #metalworking #metalcrafting #MachiningMasterclass #ArborCrafting #MillingBladeMounting #PrecisionMachining #MetalworkingSkills #MachinistTips #CraftingArbors #EngineeringPerfection#MachiningMasterclass #ArborCrafting #MillingBladeMounting #PrecisionMachining #MetalworkingSkills #MachinistTips #CraftingArbors #EngineeringPerfection #BrassTapping #nutcrackers #nutcracker #nutcrackerdiy #makingnutcracker #diy #rotarytable #millingmachine

[@jonathanforget8988]

maybe include a level in the handle so you can see if you are tapping straight or crooked................

[@LatheLegends]

Good idea with a level, I'll think about how to put it in the handle!

[@jt9498]

WOW! Beautiful machining!

[@LatheLegends]

Thanks! I appreciate your support 😊

[@RustyInventions-wz6ir]

Very nice work sir

[@LatheLegends]

Hey, thanks a lot for the positive feedback!

[@par4par72]

Fantastic build. Use in concert with a Bench Block to insure perpendicularity. I'm a big fan of the channel.

[@LatheLegends]

Your kind words mean a lot to me. I appreciate your support and I'm thrilled that you are a fan of the channel.

[@mikerobinson6606]

Awesome!

[@LatheLegends]

Thank you so much! I'm glad you found it awesome!

[@markellis6886]

That was awesome

[@LatheLegends]

Thanks for watching, you're awesome!

[@alanremington8500]

Nice job !!

[@LatheLegends]

Thank you so much!

[@MASI_forging]

How awesome. You did a great work 👍👍

[@LatheLegends]

Well, I try to be as awesome as my viewers 😊

[@user-ds6qf2mv1q]

изделие ради контента, но выглядит как из эпохи средневековья, кольчуги не хватает)) добротно сделано. и нгф помогает

[@rseletto]

Nice work and great filming

[@LatheLegends]

Thanks a lot! Keep watching for more awesome content!

[@johnpartridge7623]

Nice job mate 👍

[@LatheLegends]

Thanks! I'll make sure to keep up the good work for you!

[@WayneCook306]

Nice Job and well done,👍👍👍👍👍👍👍👍👍👍

[@LatheLegends]

Your support means a lot to me. Thank you for watching!

[@wyattselleck7236]

Liked and Subscribed. 👍

[@LatheLegends]

Awesome! Thanks for the like and sub!

[@pukinpaja1974]

Very nice!"🎅🏻👍🏻🔧🔧

[@LatheLegends]

Thank you so much!

[@hotfacts786]

Linda Hermosa ❤❤❤❤

[@LatheLegends]

Thanks!

[@user-yv8fb7pw5n]

а как же пол оборота в обратную сторону сделать, что бы не сломать метчик?

[@user-wy9th5mf3x]

Метчик специальный, для сквозных отверстий, со скосами. Стружку вниз толкает, можно не обламывать поворотами назад.

[@user-jm4nh7um9b]

Откуда фтешка, нгф и тиски на кипре?))))

[@user-vd3vi5eb7p]

красиво спору нет ! в сервант на полку положить

[@SuperWilly1952]

Warum einfach wenn’s umständlich auch geht!

[@jimsvideos7201]

🧠💪

[@LatheLegends]

Thanks!

[@Adi-zm6wg]

Nota patru

[@peterhalstead7281]

Nice job bad design

[@LatheLegends]

I appreciate you taking the time to share your thoughts!

[@thewatcher6794]

WOW you call yourself "Lathe Legend" and yet while you are cutting you have a ton of squealing and chattering. A real Lathe Legend would know that iif you are getting either Squealing or Chattering that you are obviously cutting at to high or low speed plus you should be using some lubricant, you are going to end up hurting yourself when you break a tool or causing so much binding within your Lathe that you break some gearing or fry your bearings and then you will be "The Lathe Legend without a Lathe"

[@sumgai7]

When you say "... as I walk you through the steps and tips... " -- what on earth do you mean? Where are the "steps and tips" of how you're cutting the curves, in the first 3 minutes? There's audio, but absolutely ZERO subtitle, audio, or any other help for anyone to follow you to do the same?!?!? If I'd like to make one of these, there's NOTHING here for me to follow along and do so. Sorry: I REALLY don't like to criticize, but this is just kind of show-off, without taking the time to be HELPFUL -- and you CLAIMED in your comments you WOULD be.

[@LatheLegends]

Hey, thanks for the heads-up! I'll make sure to add more subtitles and clearer guidance in my upcoming videos so you can easily follow along and create your own masterpiece or I won't promise in the description that there will be detailed instructions.

[@sumgai7]

@@LatheLegends (Sorry - my comment came off a lot crankier than I like to be, my apologies. I must've gotten up on the wrong side of the bed, and it's against the wall, as they say. :-) Apologies for the tone, and it IS a cool tool - kudos.)

[@Airtight215]

That thing is as atrocious as those clapped out machines. I couldn’t get a finish that bad if I tried.

[@twistedtree4328]

It looks way better than your trash gameplay

[@kenhawkins1033]

Keep on trying! You'll figure it out eventually. You just have to believe in yourself and keep reaching for your goals!

[@8164725519]

Looks like you know what you're doing

[@LatheLegends]

Thanks so much! You are absolutely right 😁

[@Ivan31212]

Кто ты воин 😂