As always. Most marvelous design and build. I really enjoy your build videos. Please keep'em coming
@petehafner16593 жыл бұрын
Another Beautiful piece. A trick I learned was to put a small amount of 3 in 1 oil in the groove from the glass cutter and a really small brad nail under the spot where you push down on either side. Leaving the glass on the bench.
@thegag643 жыл бұрын
I like the trim around the door!
@parillaworks3 жыл бұрын
Thanks David!
@JolienBrebels3 жыл бұрын
I love it, it's a beautiful cabinet!
@parillaworks3 жыл бұрын
Thanks Jolien!
@briangmurray63673 жыл бұрын
I have zero ability in carpentry (not allowed power tools) but you make things look so simple. That in itself is an art and why I will always watch you. Oh and when the Boss wants something - it's done.
@parillaworks3 жыл бұрын
Thanks a lot Brian!
@chrisgraham51853 жыл бұрын
I was feeling for you on the glass troubles. Woodworking is so much trial and error and it is good to see that you highlighted the problems you had to show everyone that it is not always sunshine and rainbows. Great job.
@srobins053 жыл бұрын
I always enjoy your videos... thanks for sharing.
@tonyflynn253 жыл бұрын
Beautiful and inspirational
@TheTranq3 жыл бұрын
Looks nice. I like the trim
@JPToto3 жыл бұрын
Awesome build as always! Also I really appreciate you adding the oopsies and issues with the glass. Thanks for being real.
@drumunl3 жыл бұрын
Beautiful piece!
@kenc22573 жыл бұрын
That's a beautiful piece. The finish is lovely.
@dmitryseredinov96333 жыл бұрын
First of all, I must say that you did an awesome work. Once I had to cut the pattern from the glass, pretty much similar to yours. So I've remembered the tip for car owners: if you got a crack in your windshield and don't want the crack to grow - just drill a tiniest hole at the end of the crack to prevent growing it. So I reverted the intention and drilled the hole right on the pick of a pattern, then carefully sled cutter from the hole (i.e., from the center) to the wings (sides). Succeeded on 2nd trial. Hope it'll help you to deal with the future glass details. Thanks for the video!
@parillaworks3 жыл бұрын
Thank you! That's an interesting tip. I'll keep that in mind next time!
@kevin_delgado3 жыл бұрын
Drilling is a great suggestion if you can keep from cracking during that process. But, why didn't you try cutting out smaller sections (relief cuts) the way people do with resaw band saw blades when they want to make curves and don't want to change blades?
@parillaworks3 жыл бұрын
You know, one of the videos I watched did suffer relief cuts. I guess I got too impatient and forgot about it. But that would’ve been a helpful strategy.
@dmitryseredinov96333 жыл бұрын
@@kevin_delgado There's nothing complicated with the glass drilling: just plain surface, nice carbide drill bit and patience for medium speed. Your main activity during process is to control the pressure against glass and regularly put a drop of water to the drilling place. But smaller sections' technique will work as well, you're right.
@viorsa82003 жыл бұрын
Excelente proyecto muy bien desarrollado y mejor ejecutado , un gabinete magnífico , su esposa tiene que estar muy contenta , hay que ser muy fino para cortar el cristal con ésa figura , gracias por compartir tanta creatividad y conocimientos , no habló inglés , me quedó con lo que veo , por favor subtítulos en español , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España) 🤓😜
@acewoodworks27092 жыл бұрын
Stunning.
@glenndornak64103 жыл бұрын
Awesome job.
@craftsmanfollower80043 жыл бұрын
That’s beautiful~
@richardmiller91543 жыл бұрын
I love that the Guy Who Builds Apothecary Cabinets is married to…an apothecary. ❤️ Nice work, sir!
@parillaworks3 жыл бұрын
Haha thanks! She actually pretty much designed the first big apothecary cabinet I made!
@johnmurphy38803 жыл бұрын
Great work. Great design elements.
@weberwoodshop3 жыл бұрын
Beautiful as always! Really love the subtle repeating grain on the glued-up side panels.
@parillaworks3 жыл бұрын
Thanks Blake! I kept those pieces in sequence!
@RussWilsonII3 жыл бұрын
beautiful!
@johnniewalker393 жыл бұрын
Looks beautiful! Great work.
@Lutzboater3 жыл бұрын
Outstanding,,beautiful cabinet for the wife's collection.
@parillaworks3 жыл бұрын
Thank you!
@ryderscustomcreations36653 жыл бұрын
Great build John! I. Love watching you push yourself with each new project!!
@parillaworks3 жыл бұрын
Thanks a lot Ryder!!
@billm45603 жыл бұрын
You did an great job on this buildJohn! 👍🏻 When you were cutting the glass I was holding my breath! 😀 I’ve never tried cutting glass before! Thank you sharing!
@MCsCreations3 жыл бұрын
Pretty beautiful work, John! It looks amazing! 😃 About the glass, next time try to cut it in parts, trying to make straighter cuts always it's possible. 😊 Anyway, stay safe there with your family! 🖖😊 BTW, sorry I couldn't watch the video before... I wasn't feeling well the last couple of days.
@pujajha3263 жыл бұрын
very honesty work big bro🦅
@romanbozic52973 жыл бұрын
Maestro...bravo!
@andrewaustin69413 жыл бұрын
Amazing 👏
@johnryan12113 жыл бұрын
Very Nice!
@donnygrahambuilds3 жыл бұрын
Hey man, solid build! Just found the channel, always exciting to find another builder making videos here on the tube! Looking forward to more content!
@dirtybaywoodshop-joeporter56503 жыл бұрын
Beautiful cabinet as always! I love the contrast of the white oak and walnut. You have more patience than I do dealing with the glass. I cracked a panel twice when I was making a knife display box for a client, then gave up and got acrylic haha. Also, I bought the M12 screwdriver just for things like installing hinges and drawer slides. It has been the perfect tool for that and so much more! You can usually pick them up pretty cheap for the tool only version. Thanks for the video! - Joe
@parillaworks3 жыл бұрын
Thanks Joe! I went through 4 panels for this piece but luckily was able to get a few "fails" from each panel. I'll have to give that screwdriver a look. The issue was that the bit couldn't even get into the screw head; there was excess metal or something. Anyway, I love my M12 gear. I just got the new M12 pin nailer which is what I used to secure the trim. Great little tool!
@cecilferris11633 жыл бұрын
Another fantastic project and video.
@bellasaridesigns3 жыл бұрын
Absolutely stunning!
@parillaworks3 жыл бұрын
Thank you so much!
@Bekim83103 жыл бұрын
Beautiful cabinet!
@parillaworks3 жыл бұрын
Thank you!
@MauricioGoncalves.3 жыл бұрын
Nice!
@NomadMakes3 жыл бұрын
That is one nice cabinet! And a thorough explanation about the glass debacle :D I have noticed that you use both the domino and dowels. In what instances do you prefer using dowels over dominos? Cheers.
@parillaworks3 жыл бұрын
Thanks! This was just the second project I used the new domino on. Since I have the XL, it’s a little unwieldy for smaller applications, which is when I’ll use the Dowelmax. I’m more comfortable with the dowels for now and they work really well. I’ve been pleased so dee mixing the two up when needed.
@NomadMakes3 жыл бұрын
@@parillaworks Thanks :D
@marcenariacriativa_messi3 жыл бұрын
Esse projeto ficou incrível! Parabéns! Com certeza a habilidade e conhecimento para fazer um projeto desse fez toda a diferença.
@parillaworks3 жыл бұрын
Thanks so much!
@matthewwright573 жыл бұрын
Looks great, love this build!
@rolandgdean3 жыл бұрын
Great to see the project as a whole. The pieces looked amazing on Instagram and the cabinet looks even better. As usual, great job man!
@parillaworks3 жыл бұрын
Thanks Roland! I really appreciate it!
@cabman862 жыл бұрын
About the glass, drill a small hole at the point and then score and break.
@MoscaWoodworking3 жыл бұрын
very nice piece of furniture. for the future, would be interesting to see details such as installing the back (shiplap?) or what solution you used to stop the door (magnetic latch?) these are very interesting point for fellow woodworkers (I know they are not particularly attractive for general viewers), cheers from Italy 👍👍
@parillaworks3 жыл бұрын
Thanks! Ya sorry about that. I usually either don't film it or just cut it out for time. In this particular project, I routed a rabbet in the back and nailed in a 1/4" piece of walnut veneered plywood. The rabbet is deep enough that I can also fit a French cleat so the cabinet can be hung on a wall. As for the door stop, I didn't put one in yet. But will most likely use a couple of magnets. I'll try to delve into those details on a future build. Thanks again!
@MoscaWoodworking3 жыл бұрын
@@parillaworks thanks mate. no need at all to apologize and please, don't get me wrong, it was not a critique, just a suggestion for some next video. I know that putting these details in ALL the videos can be wasted time as it is only interest for a small part of the audience. once again, amazing job
@AngieWilliamsDesigns2 жыл бұрын
It turned out amazing! Do you have a link to those drawer pulls? They are perfect size for a project I’m working on .
@parillaworks2 жыл бұрын
www.horton-brasses.com/H-42-0-375.asp There’s a few different sizes. I used the 3/8” for the drawers and I believe the 5/8” for the door.
@AngieWilliamsDesigns2 жыл бұрын
@@parillaworks THank you!!!
@casatagini3 жыл бұрын
Wow genial Top
@deziomakes3 жыл бұрын
Very nice project and fantastic video as usual! You inspire me to step out of my comfort zone. Regarding dulling router bits, have you had experience with professional sharpening? Curious if A) the bit remains the same factory size or B) it's cost prohibitive or C) it even works.
@parillaworks3 жыл бұрын
Hi! I’ve never had my router bits sharpened. I’m not sure it would be worth the cost. Maybe if I get one of those mega flush trim bits one day. I’m also not sure about the diameter changing, I would imagine material being removed for sharpening would slightly effect the size. But not sure how noticeable it would be.
@corywalker1473 жыл бұрын
@parillaworks May I give you some advice for cutting that glass next time. Don't try to cut a long curve like that all at once. Instead score it the way you did BUT also add a "relief" cut going up the middle of the waste piece that would be perpendicular to your cut. Then when you try to snap it, your snap two small pieces. Instead of one big one. I hope that sounds clear.
@parillaworks3 жыл бұрын
Thanks Cory. That definitely sounds like a good approach. I considered making multiple curves cuts in a parallel fashion, progressively moving closer to my actual line. I think I got a little stubborn and kept trying to go for it all at once. Got lucky!
@andrewbrown81483 жыл бұрын
This is a great piece~! I'm a huge fan of your work. Just a question for you (and not a jab): You have the case side's ends set inside the top and bottom. I often see in case work where the the top and bottom are between the sides to hide the end grain, as you've done in other projects. Was that a design choice for this piece, some other reason (structural, etc...), or just the way you decided to do it? This is all for my own learning. Thanks much~!
@parillaworks3 жыл бұрын
Thanks Andrew! Great question! I generally prefer the sides to be within the top and bottom like this piece but there are times I'll go the other way around. It all depends on what direction my main inner dividers are running. In this piece, the middle divider is going vertical, so I would prefer to have it be the same length as the sides so that I can cut them all at once. On the flip side, the big oak coffee table I made last year is similar in that the divider is horizontal so I had the sides surround the top and bottom. Hope that makes sense.
@andrewbrown81483 жыл бұрын
@@parillaworks Yep, that makes perfect sense. Basically comes down to a project-based, "dealer's choice" decision. Thanks so much for elaborating. Looking forward to your next project~!
@Maakt0Ni0Uit3 жыл бұрын
why didn't you try to cut the glass in 2 parts?
@josh_watson3 жыл бұрын
As a new wood worker, one thing I'm struggling with is, when to account for wood movement. Some people say it's a huge issue and others, not so much. So in this case, your drawer sides fit really snuggly, and if the wood were to expand, then it would certainly be an issue (I think). However, you don't seem concerned with it at all. I don't know how to tell if I should care of not. It's a little frustrating for a beginner. As always, this is a beautiful piece. Well done.
@parillaworks3 жыл бұрын
Hey Joshua, thanks for watching! I totally get where you're coming from. You're on the right track and totally correct about the drawers. In this case, I am building everything in the super humid south Florida heat in the middle of summer. Any further wood movement SHOULD be contraction rather than expansion whether that be due to the piece being put indoors in a climate controlled environment or the simple fact that the humidity will never be higher than it is right now, at least where I am. If I were building this in January, I would probably leave a little more room on those drawers.
@josh_watson3 жыл бұрын
@@parillaworks totally understand where you're coming from. I'm in North Florida (the Panhandle) so I get the humidity thing. It's 90 degrees and 100% humidity here today. I guess I didn't really consider the time of year, temperature, and humidity level at the time of the build. That definitely helps clear it up a bit. Thanks!
@clydedecker7653 жыл бұрын
Well that explains the apothecary fascination you've shown! Great piece - but the glass .... I'd have probably squared off the interior dado and covered it with that maple... because if it cracks now ... (mumble mumble ...)
@parillaworks3 жыл бұрын
Ha thanks Clyde. I'm pretty confident this piece doesn't have any micro cracks but I guess like any glass panel, it could break eventually. Luckily, the trim is only held in place with a few pin nails so I should be able to pry things open if need be.
@PH4RX2 жыл бұрын
Wouldn't it be easier to just have a groove along the top and bottom panels with a rectangular piece of glass to slide in between, then gluing it together? Edit: I mean there are the dowel holes in the pieces (3:53), but I think there might just be enough room to cut the groove here before taking it to the band saw.
@parillaworks2 жыл бұрын
It would definitely be easier. But I preferred the look of the curved glass covered by curved trim. The rectangular glass was Plan B though.
@PH4RX2 жыл бұрын
@@parillaworks How much of the curved glass is visible in the end after adding the trim? Oh, I guess I didn't word it properly. I didn't mean to drop the trim, but to change the need for the curved glass.
@michaelball74403 жыл бұрын
Why not just straight across the top with glass, creating relief at top of frame? Can't tell from outside. Looks a helluva lot cheaper than 6 panes wasted.
@parillaworks3 жыл бұрын
Just a matter of liking the curved look better than the straight. In the end, I wasted about $30 in glass in exchange for figuring this out; not bad in my opinion.
@michaelball74403 жыл бұрын
@@parillaworks what I meant was that if you cut the glass straight and cut the top curved and route out a relief in the back you cant tell from outside...
@jakeholloway1653 жыл бұрын
Next time, leave the glass square and make a square rebate on the back and still do the curve on the front. Just a little more chisel work. You know what i mean?
@parillaworks3 жыл бұрын
Ya that was the second option but I really wanted the curves to be seen on the inside as well.
@jakeholloway1653 жыл бұрын
@@parillaworks Yep. So make the moulding go all the way to the rabbet and then all the way down to the curve. There is always a way. I was just cringing watching you break all of that glass lol
@nathangibbs26873 жыл бұрын
That tiny square you used to layout the hardware..... I want one, where did you get it?
@parillaworks3 жыл бұрын
It’s from Lee Valley, nifty little tool.
@Ritermann3 жыл бұрын
Those cuts that are visible from your cutter, bug me so much. :/ I would not buy this product for this reason.
@MinnerTinner3 жыл бұрын
Eight ads eleven minutes in… this was a crappy video to watch! Totally took away from your video in its entirety and was incredibly frustrating.
@hazembata3 жыл бұрын
Great project (as usual)....but it's not an apothecary. What happened? Did something happen? Are you alright? You're not sick are you? OMG, is it terminal? Please tell us it's not terminal. You're too young for this! Nooooooooo..........
@parillaworks3 жыл бұрын
Hahaha funny enough, my wife doesn't really have much use for the drawers but I had to include them to get this thing somewhat close to my apothecary work!