Making Jungle Bases! - Great for 40k or AoS

Well would ya look at that, we're on Episode 5 of The Hobby Heap! Today I'm gonna go through how I make my jungle bases using relatively cheap and accessible materials. I hope you enjoy!
Thank you for everyone's support whilst I get this channel up and running, you honestly have no idea how much it means to me.
Ko-Fi link: ko-fi.com/TheHobbyHeap
Materials:
Gamers Grass Mixed Green Tuft 6mm
Gamers Grass Dumb Cane Laser Cut Plants
Woodland Scenics Green Blend Blended Turf
Music:
Epic Cyberpunk | Glory by Alex-Productions | onsound.eu/
Music promoted by www.chosic.com/free-music/all/
Creative Commons CC BY 3.0
creativecommons.org/licenses/...

[@Sheppard2418]

Jungle is massive.

[@thehobbyheap]

Wicked Wicked

[@ashpitcher3]

Booyakasha

[@NicolasBN]

Very good work ! Thanks for the ideas and this good video. I hope there will be others with bases !!

[@chester1882]

Your choice of music for these videos is top notch.

[@haku155]

These look unreal! thanks man!

[@sheevpalps6963]

Really nice Video thanks Bro!

[@sbennettpia]

As someone who's been looking into jungle bases, I will absolutely have to give Gamer's Grass a try. Thanks!

[@sirmoth3955]

Mixing up jungle bases with some sparse moss to read as vines and underbrush is one of my favorite things to do. Great tutorial!

[@JonathanBreese]

The use of herbs and such was a great tip. Thanks.

[@thehobbyheap]

No worries, thank you for watching!

[@maarte_kyel]

good job very greative and artistic artwork

[@chauser6747]

I think I'll use this on some of my infinity bases. Great work!

[@thehobbyheap]

Thank you so much for watching! I’m glad it was helpful :)

[@terrariumforbeginnersshinark]

A beautiful video and I love this video so much. I think I will try it in the future. Keep up the great work that you are doing guys and make more video like this. Thanks for sharing guys!

[@thehobbyheap]

Thank you so much for the kind words!

[@primalbiomechanics-willmon6166]

great idea using old tea bags and herb mix, I use dried fine sand off the beach, mixed with raspberry leaf (£5 a kilo) and stuff ive scavenged from the forest, like dried seed pods and nut shells. Great video dude, thanks for the tips

[@galan8115]

Nice tutorial Connor. Have a good day.

[@tomtruyens7998]

Good stuff, gave me some great ideas! Two things I might do different are only using (heavy) washes to basecoat the dirt mix so the seperate elements shine through a bit more, and adding some matt varnish or washes to the cutout plants to make them less "out of the box".

[@thehobbyheap]

These are two great ideas! I’m definitely gonna try a matte varnish on the plants and see how they turn out.

[@r.m.a.4723]

Muy buen trabajo. Buen video. Tomaré datos para un diorama de Vietnam que voy a hacer 👍🏼. Very good work. Good video. I will take data for a diorama of Vietnam that I am going to do 👍🏼

[@ruicosta2207]

excelente ideia vou tentar fazer o mesmo

[@thehobbyheap]

Obrigado por assistir!

[@rosrealm]

Nice

[@unexpectedchemicals]

Excellent use of the word “detritus” ❤ we stan a lad who makes to scale leaves and plant life and has a 10/10 sick vocabulary

[@Gynnemo]

nice

[@basedViking]

you can make your own clump foliage from car wash sponges, break small chunks off and put it though a coffee grinder then dye it with some green paint and flow improver. it helps to do more then one batch when it comes to colours then mix them once dry.

[@thehobbyheap]

Amazing, what a great tip! Will give this a go in the future for sure. Thank you!

[@paleopotato736]

Those plastic Aquarium plants could also be quite useful as basing material and hopefully might be more durable .

[@thehobbyheap]

I’m definitely going to use more of them in the future for sure. They need a bit of work to make them look less shiny and plastic, but the results are worth it.

[@thomascorcoran6639]

cool video

[@Jomi91]

Great ty

[@thehobbyheap]

Thank you for watching!

[@JOverton1992]

Based. In every sense of the word. x

[@thehobbyheap]

Haha thank you dude x

[@WarbossMorgorTeefsmasha]

if you want to make like muddy pools like for rain-forest jungle a mix of coffee grounds (just dry out the ones you use for morning coffee) mix with glue and your choice of brown paint gets a nice thick lumpy texture and you can glob it on thick and push the feet of your model in to make footprints, ad a little paint medium or water to thin it and then you can use it like mud splatter, i base my orks on mud and i like to make my trucks and battle wagons nice and mucky like they have been driving at high speed through mud puddles and get my boyz feet and pants splattered like they have been stomping through mud and muck to get in the fight as fast as possible. some of my characters that i add gore effects too you can mix red food coloring and paint medium to wash the mud making it look like the mud was made by blood soaking into the dirt from a long battle

[@thehobbyheap]

This is a great idea, thanks for sharing!

[@andrew9545]

great video! I'd recommend using cheap craft paint for doing all of your base painting stuff as it is much cheaper than the GW stuff and lasts a lot longer

[@thehobbyheap]

Thank you for watching! And this is a great idea, I’ll definitely make the change to cheaper craft paints in the future

[@sword-brother7366]

Also try dirty down moss effects!

[@thehobbyheap]

That’s what I’ve used on the logs for the other bases at the end of the video. Very good product! My only qualm is that it can be a bit pricey so I didn’t want to mention it as a must have product if you wanted to keep the bases nice and cheap.

[@xesca.7999]

Tigrex Carnosaur? instant new sub

[@thehobbyheap]

Ahh a man of culture I see 😏 Joking aside, I really appreciate it, thank you!

[@arthogof]

great video dude, you got another subscriber! I'd love to see your seraphon army! any chance of a showcase video?

[@thehobbyheap]

Thanks for watching and subscribing! My Carnosaur is my only painted Seraphon model so far unfortunately. Lots more Seraphon videos coming in the future though, especially with all the new models coming out this summer!

[@arthogof]

@@thehobbyheap i caught your carnosaur afterwards, its looking awesome! I'm gonna dig out my old lizardmen to get ready for that release too!

[@dreadclown9977]

This is a great idea for jungle foilage, my only concern is insects getting at the herb/tea mix

[@thehobbyheap]

I’ve had my mix in an airtight Tupperware box for months and I haven’t had any issues with unwanted pests or insects!

[@KelstenGamingUK]

This was a great find, all hail the algorithm. Question: why spray the basing bits - they looked good ‘as is’ and seems a lot of effort to spray them and then paint them back up.

[@thehobbyheap]

Thanks for watching, I appreciate it! I decided to spray the basing bits as a layer of protection really - at the end of the day it’s still just tea leaves and herbs really so paint and glue will stop any nasty stuff growing on it

[@KelstenGamingUK]

That’s a really good point actually, hadn’t considered that !

[@sealwithit3845]

What's the water to PVA glue ratio you use? Also do you use a special brush for the glue?

[@thehobbyheap]

There’s not really a strict ratio it’s just making sure that the mixture is thin enough so it can flow nicely and also go through the pipette without clogging it up. And I just use a random old brush - don’t use fancy expensive brushes for putting PVA on anything!

[@unexpectedchemicals]

T R A N S I T I O N

[@ricklovie8628]

Great video, can you use loose leaf tea?

[@thehobbyheap]

Thanks mate! As for loose leaf tea, I don’t see why not! Teabags are just much cheaper over here.

[@mojake2k7]

I'll be picking up some of that coconut fibre for sure

[@thehobbyheap]

It’s honestly so good. And mad cheap.

[@user-ix3vl6jp1r]

New to this type of basing. Would it be ok if I don't prime after applying the basing? Wasn't sure why you made that mix then painted over it?

[@thehobbyheap]

Painting it adds that layer of protection, but I don’t see why you can’t leave it as is!

[@AK-47forlife]

Would this work for Bolt action

[@blondedom7426]

What brand oval glue do you use?

[@thehobbyheap]

I just use a really cheap brand of PVA glue if I’m honest my friend! Same with super glue

[@Scottyjscizzle]

Probably a dumb question, but what container is your pva glue in, and how long does it stay “good” for?

[@thehobbyheap]

Just a small tupperware box, it needs mixing every now and then but it's been fine so far!

[@galan8115]

Btw thats an interesting looking pva glue, its just diluted white-glue? And could you update the video description pretty please with the tufts, grass and plants reference products? (im currently looking for that tiny 2mm flock you are using there.)

[@thehobbyheap]

It’s just watered down regular white PVA glue, think I might have gone a bit too heavy on the dilution haha. And I have just updated the description for you! If you have any more questions, feel free to let me know!

[@galan8115]

@@thehobbyheap I just have to let you know that im grateful for your content and your predisposition to answer my coment. Sincerely, thank you.

[@cromwellthesynth]

which colourforge glue was that? Thin or Thick?

[@thehobbyheap]

It doesn’t specify on the bottle but it’s a lot thinner than other superglues I’ve used so might very well be the thin version.

[@m3tts695]

Im currently giving it a try. Did you Pin the minis to the Base or did you just glue them?

[@thehobbyheap]

It depends on the miniature! Most minis I just glue onto the base and then build up the basing material around it. For larger miniatures like my Carnosaur, I pressed it into the still wet leaf mix so I’d know where to glue him down after the base was finished. More fragile miniatures (like resin) I’d probably pin

[@capefury8731]

I don't understand why paint over the initial mix

[@thehobbyheap]

I’ve answered this a couple of times but it’s basically to keep it from flaking off or going bad - the paint and glue acts as a protective layer. Thanks for watching and thanks for the comment!

[@simonbelmont0993]

I guess my question is why bother with a particular mix of dirt and herbs when you're just going to prime and paint it anyway? Wouldn't any sufficiently technical paste do?

[@thehobbyheap]

That’s a fair point! I wanted to use easily accessible materials and make them go a long way. Tea bags, herbs and coconut fibre are dead cheap and will get so many more bases and dioramas done than a store bought texture paste. I guess it’s about how much you can make for as little money as possible. Plus a texture paste is usually just paint and sand - even with a primer and a paint the little leaves here will show through and look like a muddy leaf littered floor. I hope that helped answer your question dude!

[@simonbelmont0993]

@@thehobbyheap Hey thanks for the response, and fwiw I'm not trying to be a contrarian, I'm actually looking up video ideas for doing some bases for my Star Wars Legion Stormtroopers and came across your video. It's fantastic work, btw, and the end result is excellent. I'm just trying to understand the reasoning as a newbie to basing and, yeah, I can totally see the budget value in doing it this way. It's just that I really like the initial look before it was primed so now I'm wondering if there's a way to maintain that natural look with some sort of binder/glue that won't also make it look sludgy or slimy.

[@thehobbyheap]

@@simonbelmont0993 I appreciate the kind words, and it was a good question! I didn’t think you were being contrarian at all. Some water down PVA does keep it locked in before paint and priming but for extra security it might be worth hitting it with a matte varnish instead of paint if you wanted to keep the original colouration. I haven’t tried it myself but could be worth a shot!

[@flowerknight4879]

do the herbs and spices not rot after a while?

[@thehobbyheap]

I’ve had them in an airtight Tupperware box and they are still 100% useable. Rot/mould will only occur if moisture is added. If they get wet, then my Tupperware box isn’t doing it’s job!

[@flowerknight4879]

@@thehobbyheap So basically the PVA seals it fairly well and as long as you're not sprinkling water on it for some reason you're fine lol. Thank you

[@Master_of_Antares]

You don't have to cook this in the oven or anything?

[@thehobbyheap]

Not at all!

[@davidwasilewski]

Wonder if this would work for the new epic 40k game coming out in August? (8mm scale).

[@eliteguard1381]

Nice bases, pretty “based” if you ask me

[@Sentient_Scarab_Swarm]

Ngl the most British thing I’ve ever seen in a video was the tea leaves as detritus. No idea why it’s just so odd I guess. Good video though.

[@thehobbyheap]

Hahahaha you’ve just gotta accept that tea bags are everywhere over here and very easy to obtain.

[@rosrealm]

Heresy, emptied tea bags... Noooo 😢

[@thehobbyheap]

Haha it’s okay! They were only like Sainsbury’s Red label so I was doing the world a favour

[@rosrealm]

@@thehobbyheap fair enough 😊

[@ThatGuy-bh9qh]

Next time dump it in the harbor