Making Phosphoryl Chloride to Fight YouTube Censorship (REVISED VERSION)

[@LabCoatz_Science]

Oh look, this video might end up getting more views than the original! Instead of limiting what I earn from this "dangerous content", KZbin basically doubled it...up yours censorship!

[@polecat6534]

This got recommended to me even though I wasn't subbed. I am now though.

[@Lordofthethighs420]

@@polecat6534 hey me to

[@jacobcastro1885]

KZbin is ASSHO! Hail SALTY CRACKER! 🧂

[@dtvjho]

This popped up in my feed. But I dont trust KZbin, they can just swoop in like they did to Robin Bullock and poof, channel is now empty. No vids. Better to simulcast your new vids to YT *and* to Rumble.

[@johndeerdrew]

What the actual fuck? KZbin censored the biggest safety warning I've seen in a video like this. The censored portion is literally, hey kids be safe with this, it literally sent me to the hospital.

[@McDerpinton]

Censoring the potential side effects of handling a chemical is dangerous in and of itself. KZbin really dropped the ball.

[@JaredBrewerAerospace]

Yeah that part of the video dissuaded me from synthesizing the chemical just for funzies but now I'm revisiting the idea because of what @tehs3raph1m said. I know it's dangerous that it might give me an opportunity to set my fume hood on max and dust off some safety gear I haven't needed to exercise in a while. I don't get that sentiment from this reupload.

[@tehs3raph1m]

im only here because fuck youtube

[@LabCoatz_Science]

We're basically all here for that, lol

[@BackYardScience2000]

💯

[@DarenMiller-qj7bu]

Same. I don't even know what I'd use phosphoral chloride for. In fact, I can't even read.

[@JaredBrewerAerospace]

I appreciate how deep fried this post is @@LabCoatz_Science Maybe on the original upload if it said, "Warning this should not be attempted by anyone for any reason", it would have passed their smell test. I've seen it used on Finger Skateboard trick videos and I've never seen those get slapped with the age-restriction requirement. Just sayin'.

[@TheMrDarius]

Same we are going to push the algorithm

[@memberwhen22]

KZbin are acting really evil lately and anti-knowledge. Hopefully they leave this revised video monetized so you can be rewarded for your work.

[@turtletom8383]

Lately like the last 25 to thirty years

[@riki_XD]

Is*

[@shedflu]

​@@turtletom8383amazing how they already had that going 5-10 years before launching the site itself.

[@garycard1456]

On the other hand, youtube(censortube)seems to welcome videos of persons doing ABSOLUTELY POINTLESS things such as melting and pyrolyzing random objects (Lego bricks, candies, biro pens, golfballs, etc, etc) over a skillet heated to red heat above a camping stove, with horrendous fumes given off (such fumes would probably be far more problematic for health, if breathed in, than well planned-out chem experiments/syntheses performed in a hobby chemistry setting, with safety precautions taken and PPE worn).

[@cassandrachristine]

I'm ready to move to another platform. yesterday i made a rumble account but i was disappointed that they seem to charge creators so much.

[@mrdarklight]

Demonetizing people for admitting their mistakes is just going to lead creators to never admitting their mistakes, which is much more dangerous for viewers.

[@andersjjensen]

Exactly. "I ended up in the hospital and I'm not even entirely sure why" is something every young aspiring chemist should hear.

[@AmaroqStarwind]

KZbin literally doesn’t care. They just want money.

[@TopazBadger6550]

KZbin: First-Level Thinkers

[@dtvjho]

Creators are being pressured off the platform. Better to upload to both KZbin and Rumble. Then nobody is a sitting duck

[@ScientificGlassblowing]

Ironically KZbin censored the best part of your video, the consequences of playing with things you do not understand.

[@ltpinecone]

Us to KZbin: "So can you get rid of the spam and inappropriate content?" KZbin: "How about we censor history and educational videos instead?" KZbin Users: Wait. What? You keep doing what you do, it's awesome! Screw KZbin and their backwards policies.

[@stevebabiak6997]

KZbin seems to LOVE having pr0n bots all over the site. There must be some type of monetization in it for KZbin.

[@JohnSmith-mf3dh]

I just keep using ad blockers, I want them all YT staff without job... Creators can have Patrons. A lot do it and they are doing well. Not the same a YT bucks but it's time for revenge on YT.

[@HectorFabela-k6u]

What I don't understand is why creators keep putting content on youtube. Why not leave and create their own video website? Why let youtube profit?

[@sandordugalin8951]

I'm a simple man. I see a youtube video made to fight youtube, I click play and like.

[@stevebabiak6997]

Same. And even better, the KZbin algorithm seems to know I feel that way, so I get fed such videos even though the video’s topic might not otherwise fit my viewing habits.

[@platty9237]

It speaks a lot about the culture here, despite (or in spite of) the corporate sociopathy of YT.

[@Dank_Lulu]

Ah yes, the good ol' "punish someone for doing the responsible thing because it makes us look bad" strategy. Truly, one of the strategies of all time.

[@NoEntityFound]

"What? Warn people that accidents can happen even if you're careful and to stay vigilant? Absolutely not." - KZbin, probably. Seriously. I just re-watched this entire video because screw KZbin's weirdly applied censorship. You keep putting out quality videos, LabCoatz, I promise, you are appreciated.

[@memberwhen22]

One would think that KZbin would want your very valid warning and inclusion of the dangers of chemistry that you personally experienced, so that others could learn from it and avoid it themselves 🤷‍♂

[@DUKE_of_RAMBLE]

KZbin and Logical Thinking are the same polarity, so they repel each other, unfortunately. ☹️

[@custos3249]

Nah. Ya see, history shows that keeping people ig -EditForIronicYTCensorship- norant never leads to bad outcomes. Just look at teen pre -editFor IronicYTCensorship- gnancy.

[@custos3249]

Someone let me know if you're able to see what should be my previous comment. YT censorship may have just devolved again, so I'll have to do new testing to see how to sidestep it.

[@DUKE_of_RAMBLE]

@@custos3249 I see it. My "test" to check if a comment of mine has been devoured by the automoderation system, is to wait 30-45sec, then edit my comment. If it edits, it should be visible to all; if it errors, it's probably removed. _(technically, they're only "hidden")_ UNFORTUNATELY, I've noticed lately that some of them will accept an edit, but are not visible... So I fear this simple check may be unreliable. I'm hoping it's just because the comment system is quite broken in general, competent unrelated to what we're experiencing... Or at least it is here in YT App land. (yes, I'm on "the list" as well; thanks Russian troll farms! [they dislike my Rus-Ukr ramblings and falsely report our comments... unfortunately, it's clearly quite effective 😔])

[@vahannema]

@@custos3249 i see this mesage just fine

[@kstricl]

Caught the OG vid, watching again to help push this.

[@xenomancer1]

I saw the original. There was no reason to age restrict your video. Repost the original to all of the competitors and let KZbin cry harder about views they already deemed unnecessary.

[@Lux-h4h7h]

What competitors?

[@severpop8699]

@@Lux-h4h7h Odysee does pretty well me thinks, Reddit not so well thou...

[@freddiesalone]

Wow, really disappointed by KZbin on this one

[@SeabornNomad]

i'm surprised anybody trusts or has expectations of google anymore.

[@uralprospector]

​@@SeabornNomad I haven't trusted Google since 2006.

[@BigRed-MWA]

What do you mean this one??? KZbin is censoring so many content creators...🤬🤬🤬🤬 Fck PooTube and Spying google. This company needs to be split up and sold off. 🖕🤬🤬🤬

[@mikerada2773]

@@SeabornNomadthey did take out don’t be evil from their guidelines for the company.

[@3xeplodng_3agle_studios]

What's to be disappointed over? Its common behavior for them.

[@vaultboy2270]

this is an utter failure on KZbins behalf. your previous video was excellent in showing the consequences of not using extreme caution while working with chemicals even if we have used them in the past. to take away the monetization on the video for doing so is simply absurd.

[@andersjjensen]

Watched the entire thing out of spite. Being uncareful and ending up in the E.R. should NOT be age restricted. In fact that's PRECISELY the kind of video young aspiring nerds should watch. How I managed to survive age 10-18 is a mystery to me, as I was book-smart enough to be really fckn dangerous (and blew up several "items" in the neighbourhood) but I had no realistic understanding of just how dangerous those things can be. I joined the army at 18 and oh boy... oh BOY did I realise that my 12 year old self belonged on a terror watchlist.

[@barcodenosebleed5485]

This just enrages me so much and reminds me of someone from my youth. I was in elementary school at the time and this boy from my neighborhood was about 5 years older. He was widely admired, known as super smart. Basically had the reputation of like George Washington at school. Well, one day he was playing with some explosives and eliminated a few fingers. He was completely distraught over the incident. He had big plans, including the military and eventually wanted to be an FBI agent. He saw his dreams vanishing and assumed his life was over because of the incident and unfortunately in that anguish decided to make that a certainty. Even good, smart kids are going to mess around with stuff they have no business with. Better that they have more versus less information. YT couldn't care less about common sense. They see a risk for liability so they mitigate it.

[@acf2802]

For those of you wondering, he may have been exposed to the chemical and had painful eyes that needed to be flushed out at the hospital. Lol, take that KZbin.

[@thatguy431]

watching again and commenting for the algorithm. we love you labcoatz!

[@davidcovington901]

So KZbin dislikes your video that showed a possible DANGER of handling POCl3 ??? That's so backwards. Meanwhile, as you say early on, this chemical is used to create Organophosphates from alcohols. That got my attention. Organophosphates are what nerve gases and many insecticides are. So I was hoping that no alcohols in any amount or form were present during your reactions, especially when you had excessive lacrimation (one sign of nerve agent exposure, but of much else also, of course). Maybe it was from from HCl vapors? Glad you are better!

[@IrynStyl]

That is insane that youtube supressed a video for.... Explaining that a compound is dangerous. I'd call that actively malicious if I knew it wasn't done out of sheer incompetence.

[@Ryan-gw3yv]

It's both.

[@vsync]

Rekita has a story of how they did the same to him, said he was glorifying violence by showing a fight that went badly and saying this destroys and ruins lives and tempers must be kept in control

[@alllove1754]

Kudos on keeping a positive attitude like that. I hope you gesticulated that out off camera! I so feel your pain. How many videos I had made into a copyright issue or similar, just because I had the radio on in the background when I drove through a cherry blossom filled road nice and slow. ❤

[@maxq519]

Watched the original, watching this all the way through to help get you views and support the channel. Keep making awesome videos! KZbin censoring the most important part of the original video is just stupid and dangerous.

[@leylanibunni]

That disclaimer tells me EXACTLY why not very many people are doing this- and I hope the best dude

[@posi_de]

Its a shame what is going on here - only negative news from YT the last years instead of fixing the broken recommendation algo. Keep on making great video!

[@DUKE_of_RAMBLE]

Any time the recommended videos are getting out of whack, I send YT a detailed Feedback. For these Quality of Life sort of things, they're good (prompt) about addressing. I've sent dozens of feedback over the years about various quirks, from comment preview line counts (before "Read More..." shows), to the Recommended being absolutely broken and recommending music that doesn't match anything I've ever listened to, and "Not Interested" not functioning and continuing to recommend similar content. As well as tons of other small app user interface annoyances. All of them trend to get sorted out within a week or two. (the "read more" one occurred within a couple hours heh) Lately I think they've been overwhelmed though, as the comments system is in shambles, and has been for a couple months. I see they are trying (I comment alot lol), but it's kinda just getting worse... 😅 However, all of these things are unrelated to POLICY stuff... You pretty much won't see any movement on use grievance with policies, but I *_still_* suggest sending a scathing Feedback about it. 😏 Eventually, as more of us convey we're pissed off, they'll budge a little bit. 🤏

[@MrTylerStricker]

Thank you for fighting censorship and bringing us this fantastic educational material. This brings to mind the legal challenges the 'Anarchist Cookbook' had to go through, but, ultimately, free speech & education won out but there's always a cost to be paid

[@andersjjensen]

The absurd thing is that this is like allowing the Anarchist Cookbook only if he cuts out the safety reminders.

[@sneekez]

Proud to have watched the first vid 💪 KZbin just doesn't like chemists I guess :(

[@charlesurrea1451]

So your demonetized for, telling the truth and showing consequences if you're not careful? I mean, God forbid if they ever read the MSDS at KZbin

[@vgamedude12]

I clicked and was like "wait i watched this already", then i realized.

[@SciDOCMBC]

Interesting that this video was criticized, on the other hand, there are meth synthesis videos floating around on YT, which YT obviously has no problems with. Don't let it affect your good work, keep it up.

[@billynomates920]

i just got bored with my feed and went up top and clicked 'experiments' in my feed. watched a guy cooking up crack.

[@JoeA1974]

Iron pipe threads need a lubricant to fully tighten. Without something to reduce friction the tapered threads get tight before they become sealed..

[@LogieD223]

pipe threads won't hold any pressure at all without a thread sealant. High temp rated thread sealant or getting someone to weld or braze your end cap on would be ideal

[@ingensvidcz5390]

Oh you bet it does react well with water, the quantity is what makes the difference. Once I was quenching a reaction with POCl3 with water. First being cautious, nothing really happened, so I poured all the water at once. After like 5 seconds, the flask was empty, its contents were all over the hood walls and ceiling, the hood filled with milk-thick cloud and I, inhaling some of that white goodness, ended up without the ability to smell things for the rest of my life. The latent period in which you manage to think that it is benign, thats the best trick a chemical played on humanity imo. Enjoyed the vid alot, stay safe.

[@ho0t0w1]

We gotta stand against censorship or this won't stop.

[@Pepesmall]

Censorship, or age restriction, or not paying people they don't want to give money to? Or do you just not even care if it is actually censorship or why? Should they stop censoring CP? People really don't understand what a political stance is do they? Can you give me money since the government is censoring my voice by not paying me and not providing a platform to spread my anti government beliefs?

[@tye331]

A few problems with pipe in relation to sealing is that it's a tapered thread. It creates a conical leak path without a proper thread sealant like PTFE which would more than likely burn at 500ish° f, also common SCH40 pipe is malleable iron, you can get 304 or 316 stainless fittings and pipe, however they are fairly expensive.

[@pickle879]

I haave know literally no idea what this chemical does but good job

[@trymatic7151]

You can use it in the Vilsmeier-Haack reaction to formylate certain compounds. Basically you could make benzaldehyde with this using benzene, DMF and phosphoryl chloride

[@zoldrax9891]

You can boil and distill it with dry sodium acetate and get Ac20.

[@pickle879]

@@trymatic7151i understood even less of that lol

[@trymatic7151]

@@pickle879 You can attach a formyl group (-CHO group) to a lot of different compounds, like alkenes or benzene. You do this with DMF (dimethylformamide, a common solvent) and phosphorous oxychloride (another name for phosphoryl chloride)

[@andersjjensen]

This is an ingredient you need if you want to make n3rve g4s. KZbin has no problem with him showing how to make it. But youtube has a problem (see previous video) showing him in a hospital because his eyes started burning so badly he couldn't sleep after having done the reaction. The last video was a prime example of why chemists are absolutely hysterical about safe procedures yet still have every first aid gadget ready too. This video just shows you how to make something that will get you on a list if you buy it online and your last name isn't Smith.

[@harrypeterson9287]

A high temp "pipe dope" is absolutely necessary for coarse threaded steel fittings like that. I've used one from Permatex (not sure exactly which) to make mercury from cinnabar and for high pressure steam, it holds up against high pressures well as well as temps anything short of a cutting torch.

[@technomage6736]

Love how you read the first part of the title and then see (Revised version) 😄

[@jimbojimbo8]

Wow this is a random video that's been awesome ! I'm glad I subscribe to you a while ago

[@Sulu-s_Apocalypse]

in powder reactions there is something to be said about grain size - pretty sure fine particles would react easier than various sizes you get from a home blender (apart from water contamination and OTHER contaminations in table salt). Also - for your own safety - it is better to use ceramics for burning reactions, as they tend to be a little more resiliant to temperature shock and a little less explosive than glass.

[@herpderpington]

Almost always the most damaging component of any effort is impatience.

[@ajhubbell3754]

I have no idea what this is…..nor do I care,but, KZbin doesn’t want me to watch it …….so, here I am. All the reason I need.

[@nigeldepledge3790]

Phosphoryl chloride (aka Phosphorus oxychloride, POCl3, or "pocl") does indeed react vigorously with water. I was once using it as a reagent, following a procedure from an oldish paper. The work-up procedure described washing the reaction mixture with water and sodium bicarbonate solution. As I added it to water, it was spitting and splashing a lot, so I had the clever idea of using ice instead of water. I added one chip of ice to the reaction mixture, and it went "whoosh", depositing my reaction mixture on the lab ceiling and forming a cloud of HCl gas. Most chemists have had to do a "bench extraction" at some point. Some have even had to do a "floor extraction". That was the only time I've ever done a ceiling extraction, though. Oh, by the way, your lithal looks awful. It's supposed to be grey, not white. I have a suspicion that your sample got exposed to water somehow and formed aluminium hydroxide.

[@maertsnosmirc]

Here for round two!

[@mark86016]

Not having that extra info is even more risky I think. KZbin come on...

[@Valoute_GS]

Mixing Celsius and Fahrenheit makes some part a bit confusing. For ex you said 250°C was blistering hot by mixing the two at 2:42 You should stick to one or another (or continue to trigger like me for fun 😂) Great vid as always tho

[@stevebabiak6997]

I re-listened to the section you highlighted but only heard Celsius.

[@therealguy403]

Let's make KZbin great again! We want to know and some of us even need to know about the dangers of chemicals. Content like that should never be censored.

[@iMomoHDx]

To get this tube threads closed so no gas and stuff can get through u should use some like locktight. Like scratch along the threads on the tube so the string of the locktight stays on the thread. Just apply it in the direction u would drill on the bow or whatever u drill on to it

[@Tentative79]

I like your content my dude! I hope you keep it going!

[@Persun_McPersonson]

R.i.P. old title, "Turning Salt Into Phosphoryl Chloride: The Chemical That Got Me Demonetized (REVISED)"

[@LabCoatz_Science]

Yeah, I did like it, but I wanted this video to stand out from the original (even though it's basically the same, just chopped down a little).

[@Persun_McPersonson]

@@LabCoatz_Science I understand, I just wanted to make sure it's not completely lost.

[@morlanius]

@0:26 correction, you can't make perpetual motion.

[@gaborschreiner713]

The yellow-green color you see with LAH, might be PCl3 by the reduction, or PCl5 but the formation of PCl5 is more complicated.

[@chemistryscience4320]

I will gladly watch this wonderful video again :)

[@mrcody1924]

What was the yeild? Ive checked both videos and i dunno if i missed it or its not shown 😂

[@WizardZph]

Saw the community post. I understand and will rewatch 3x to make up for it

[@kristena5825]

KZbin censorship is so scary and awful, and it won't end well...keep fighting the good fight!

[@RovingTroll]

Injury or harm of any kind is just forbidden by KZbin. Even discussion of being injured or harmed is banned. You are not allowed to talk about the harm that may come from things because there's discussing something harmful. He'll even using words like injury or hurt instantly demonetize your video. It can be as simple as saying "ouch" or "or that hurt" to a coming scratch, and it would get your video demonetized

[@K31TH3R]

And then we sit around and wonder why so many people seem to be completely detached from reality!

[@mowgli2071]

Well there goes my plans for making a charcoal-peanut butter-diamond perpetual motion machine. Party pooper.

[@marconiandcheese7258]

Yay. Another labcoatz video! If you aren't getting AdSense I'd join a patreon.

[@jaykay3407]

There are multiple overunity devices that are currently under development. The laws of physics will have to be rewritten.

[@noelbreitenbach8673]

Love you videos and respect the struggles you go through inspire us!

[@michaelthemadsoldiertist]

Where do I get cheap pure chemicals without catching a federal case or getting ripped off?

[@mattski6388]

Now. Did the table salt have iodine in it ? And if it did as most salt for food has. Does it screw up the experiment?

[@Nefville]

I get the disappointment but its no mystery why YT demonetized it. You made something that somehow injured yourself and you showed the exact steps that others could use to recreate it. Is it right for them to do that? In my opinion, absolutely not. Someone could make a video showing how to make a laser that could cause extreme burns and YT probably wouldn't care but they're scientifically ignorant and don't understand chemistry. So out of an abundance of caution they brought the hammer down. The good news is everybody hates YT, its a monopoly that intrinsically violates the first amendment via loophole of being a publicly owned platform and I expect you will get a lot of support because of it.

[@LabCoatz_Science]

Yeah, it's not much of a mystery, at least according to their guidelines. It's just kinda funny that they leave far more dangerous or illegal things up (like making meth, TATP, nitroglycerin, etc), and then choose to target videos like mine that go over the risks and show why you need to be careful.

[@gothicbagheera]

The visual you used when talking about "ordinary table salt" was a picture of a Morton Salt container, that stated it was not the salt with iodine added (which is the most common type sold), but I'm curious if you knew that the table salt from Morton Salt without iodine added, still isn't pure sodium chloride salt. There are trace amounts of a few other elemental compounds that are added to help prevent the salt from clumping into a single, solid mass if it's exposed to a large amount of moisture.

[@LabCoatz_Science]

Yes, I knew. However, the tiny amount of calcium silicate added to prevent clumping shouldn't really do anything to the reaction.

[@DadofScience]

I wonder if you made a safety video about inadvertent exposure to hazardous materials in the laboratory if it too would be whacked with the restriction stick?

[@jandy1551]

To be fair, the clip from GreatScott, he addressed in that video that it is not how it work so he did not lie.

[@champgamer4394]

I was watching the original version one day, only got past half of it and I was so interested that I wanted to finish it the next day. I come back and it is damned blocked for me. SCAM. darn you KZbin.

[@brentlehman5028]

I'm really sorry you had trouble with censorship. The yellowish substance might have contained lithium phosphide?

[@JonTheMiniBeastHadden]

Things always go wrong when you try and rush things.

[@320iguy]

Looks like Strontium, not sure what you do with it. I never really got past blowing shit up on chem, but it makes a super cool pink flame when you light it up. 🤙

[@lurkmoar3926]

Hold your breath in that lab.

[@godlugner5327]

(to everyone rewatching after the first upload) if you just click on the video like it and click away he doesn't get credit for your full view you have to sit through most of the video

[@LabCoatz_Science]

If I recall correctly, KZbin has it sent to count as a view after 30 seconds of watch time, so you don't even have to watch most of the video if you're just trying to give views.

[@godlugner5327]

​@@LabCoatz_Scienceas scientists where we live by people giving accurate information you hit the nail on the head..... "The experts are untrustworthy, The manuals are proprietary, The management has different priorities, The authorities are too outdated to understand the problem, News is an impending sense of doom, and our compensation leaves us constantly unprepared for what comes next" But it does get better

[@K31TH3R]

@@LabCoatz_Science Hey, you're not KZbin, you can't tell me what to do. I'm going to watch the whole thing again, and we're both going to like it.

[@mo323dim]

you are very magnificent. I've learned a lot from you. I want to ask for your help. Please can you make a video on the synthesis of theophylline? With easy reagents

[@DUKE_of_RAMBLE]

Watching again because YT is a child that likes to throw tantrums... _(hopefully it doesn't matter that I've set it to 2x playback lol)_

[@YTDeletes90PercentOfMyComments]

It does, 2x playback counts as you watching half the video, but for me I can barely even use the algorithm anymore anyways

[@ddave30]

Although the pipe you used is steel the end cap and elbows are malleable iron fittings.

[@zorro2757]

Making D-Luciferine and testing it would be awesome and it would also be a somewhat difficult run. It uses KCN and other interesting chemicals

[@sayomiau1]

I somehow managed to watch the censored video (youtube really did make it difficult for me to be able to watch it) and I couldn't see where the inappropiate stuff was. I really wished there was an actual competitor for youtube. They have been making it sort of a painful experience lately. I mean, I know there are other websites but their either require a paid subscription or lack users

[@oneproudbrowncoat]

Supposedly, perchlorates can be produced by bubbling Cl through a water solution of chlorate & hydroxide. Never seen anyone actually do it.

[@Spackalaken]

Watched the whole thing again. Let’s get the algorithm going!

[@TheD3cline]

casts: corrosive snowstorm

[@xcoder1122]

KZbin logic: Showing that making dangerous chemicals can have serious consequences -> Must be age restricted. Just show how to make dangerous chemicals concealing any consequences -> Unrestricted for all ages.

[@pernykvist3442]

This first substance with 5oxygen atoms, could that be used in explosives?

[@konstantinlee2275]

I can suggest to use a reactor made from Titanium. Steel is not that inert to corrosive reagents.

[@alw1217]

Thank you for the videos, even if youtube is on some butt, we appreciate the work you do for us.

[@Flyboydady]

How did you start out and where did you learn all this?

[@haydenparsons5783]

Hold up. So its okay to showw how to make it. But not okay to show potential sife effects if theyre not handled correctly?

[@probably3dprintingsomething]

Lmao the intro reminded me of classic shitpost "How to make Crystals" - wherein they tell you to mix copper coins, ammonia and bleach xD totally doesn't make mustard gas, it makes c00l crystals.

[@Andrew_Fernie]

I hope this one satifies the draconian bots

[@tonyb6821]

OP: "Don't put fingers in a fan or THIS may happen."... KZbin: "OMG, CAN'T pay for THAT to be known by kids"...CENSOR! DEMONITIZE! AGE RESTRICT! (but WE still make money!) Kid sticks hand in fan, looses fingers... KZbin: "Whew, glad we didn't show that and saved kids fingers! (and still made money!) WORLD: "...UMmmm..." KZbin: "Ka-ching, money, money, money..."

[@frankkatz125]

WHATS IT USED FOR DID I MISS IT ?

[@elfreak0na1eash]

Watching again to show my support! 🧪⚗️👨‍🔬 Keep doin' what you're doin'...I mean....except the trips to ER 😅

[@nonothebot]

At school my teacher made sodium from sodium chloride by melting it (hot!!!) and with electricity. That was fun ! Table salt can be very dangerous !

[@TheFarmacySeedsNetwork]

Excellent dude! Subbed thanks! cool video!

[@Bambi_Star]

Did you make Lithium Phosphorus Sulfide Chloride ?

[@SwissExperiments]

how are you yet NOT on Odysee??? even if it's just for a backup you'd get to keep all videos up! Fight youtube censorship with competition

[@1.618_Murphy]

Nile is the goat, no doubt. But I prefer your videos! Keep it up, brother.

[@M332]

To be honest you pick a pure salt, I work at one of Morton's plants and we put other anti-caking agent in table salt, like TCP (Tricalium phosphate) and sodium silicate, sodium ferrocyanide. I would recommend Morton's tfc 999 fine salt or sodium chloride USP.

[@chaosangel123]

I’m with youtube on this one. All of this was dangerous, with clear lack or mention of safety protocols used.

[@sleeptyper]

Just to spite the video_site_you_shall_not_name_in_vain, i subbed. Lol no, good stuff. I watched the first video when it came out but forgot to click the button (thank ADD for that).

[@01dumbfrog]

Couldn’t you draw a vacuum to remove the moisture?