Malcolm Bendall | Plasmoid Tech Updates | TSG Kitsets, Books, Trials and more

[@somedohavethem]

So so happy for you all guys an gals 🎉🎉🎉❤❤❤❤❤ amazing for the world, our children and the next generation in what you've created. Truly grateful 🙏

[@psyopswitch]

thank you so much for keeping up up to date. I really appreciate you short, sweet, direct to the point. I dont always have the time for Bob Greenyer's long versions. though they are great. I'm a really poor renter, I wish I could afford one. hopefully in a couple years, if we are ok. as a species. but to just know, that after all these yrs, someone have figure out, and has been able to bring it out to the people. I advertise for you geys every chance I get. whenever I can swing the conversation towards energy, frequencies. even if someone is talking about history, I will bring it around to one if not all of you. it sometimes bring me to tears to be alive, know they havent broken the human spirit entirely. is wonderful!!!

[@corkygoss7403]

I too am a broken record on how this answers many questions especially about energy methods and history. I keep pressing loved ones mainly so they know I have my head on a swivel about this. Cheers.

[@emrysmcwryn7902]

They haven't plugged the exhaust pipe into the intake yet even though they claim the air going in is identical to the composition of the exhaust. This is all you need to know to know they don't believe their own story. Run the machine on a closed loop (exhaust feeding intake) and run it underwater in an aquarium on stage so everyone can clearly see that the exhaust is the same as the intake- air in, air out. That is Bendal's claim and yet he has not done the obvious demonstration. That is because he is selling hopium. It's very addictive. Be careful.

[@ericmc6482]

@@emrysmcwryn7902 The petrol fuel input is continuous (potential) energy input into the system and also continuous matter (hydrocarbon) input into the system, parallel to this is initial input gases mixture containing oxygen. The net system output is work and excess gases (derived from combustion of the fuel matter) so running the system sealed closed loop would cause internal gases pressurisation of the system, the bubbler apparatus would also need to be operable under positive gas pressure condition and positive temperature condition. For continuous operation the excess gases produced would need to be vented, because sealed closed loop operation would give rise to infinitely increasing gas pressure (also causing supercharging effect !?)....the excessive excess gas could be 'waste gate' vented to the atmosphere to regulate engine intake/exhaust gas pressure operating conditions ?. So yeah, given that the engine exhaust output gas composition is indeed matching atmospheric gas composition (at least for oxygen) and excess gas is vented then yeah the engine ought to be able to run closed loop......what does multiple passes of gases through the engine system do ????.....a closer look at test results show that output oxygen level is not quite up to atmospheric oxygen level, close but not matching ?. An easy and simple test would be to route a suitable hose from the system air intake to the exhaust output and variably 'sniff' the exhaust output ?. Jordan and/or Malcolm, has anybody tried this intake "sniffing' of the exhaust output and did operations change ?.

[@tim64872]

Thanks Jordan. I live on a small island in New Zealand that is off grid. I’m looking forward to trying the kit, it will save a lot for poor folk.

[@KatiFuri-w2d]

Little Old Lady here... I'm loving this! Little-by-little I'm sinking it into my brain ( Not my area of expertise by any stretch). If I can come to an understanding this technology through you guys than anyone can! Thank you so much for putting it all out there.

[@friendlyone2706]

Appreciate all updates! Your speaking skills have greatly improved since your first talks.

[@corkygoss7403]

A great update. Nice of everyone to help out Bob with the TM archives. And also to hear about the other events and people involved. I recommend Frank Ackland's recent videos as well at E-Cat World. As a shape guy, I enjoyed seeing the time crystal. Staying tuned. 2025: The Year of LENR!

[@CitizenJourno-1]

Sincere thanks, Jordan.

[@magnetsandmushrooms]

Very nice summary

[@CraigThompson-c6q]

Hi Bob. I would like to say first that I believe that the work of Malcolm Bendall, yourself and so many others is truly amazing and will change our world for the better. You all will go down in history. Secondly I watched a documentary yesterday about crop circles and the idea that they are a message. This individual believed that they are a 2d representation of a 3d image. Essentially a blueprint. When he produced a 3d image of a certain crop circle I was truly speechless and excited. It was the exact image of your circle within a circle within a circle discovery. I’ve added the link please watch this and if you would mind could you let me know what you think. kzbin.info/www/bejne/i4qshJ-HopWlmaMsi=PZEWDVmKt7XviYyg.

[@ClubhouseGardens]

I am so thrilled this is going to actually get to market! My standby generator is a true gas guzzler to the tune of approximately 32 gallons of gas a day and would love to try the plasmoid setup on it to see how it performs! I bought some of Bendel's notes in case someone comes along and tries to suppress this technology.

[@jaa777kko]

Looking forward to build my first rodin coil this year. Awesome stuff everything you, Malcolm and everyone else doing, thank you!

[@MonoZeus]

Thank you for all your work! Please BALANCE your audio. I listen while at work with earbuds, and your intro portion was only coming in on the left channel. Thank you again!

[@dxtrum]

Not the first time lol. Last time he just said to stop complaining

[@andrewharlacher3414]

Legendary podcast. Watch the full tgjng if you can. Well worth it.

[@IronicallyVague]

Wonderful viewing experience

[@raycar1165]

Very good. Thanks for sharing I missed that in my feed. Much ❤ Love 🌎🌏🌍☯️⚡️ Terra 🌞 Pax

[@adamdennis9790]

How do I put a kit on a turbo diesel

[@dfizl11]

thank YOU for sharing ✊🏻 looking forward to what’s next 🤙🏻

[@tezsullivan6048]

Thanks. Stay safe

[@thegizatemplate432]

Great job brother, keep up the great work!

[@BobsMinis]

Didn't see anyone else mention that, so let me: in a couple of your last vids, including this one, your voice is only in left channel, not stereo.

[@MTRVPatrick]

I think the E-Cat people are beating Malcolm to market with Zero point products. His is still relevant to retrofit for carbon concerns.

[@davo-ju6er]

The stoke increases with each video . Thanks Jordan 👊

[@MrRerod]

Where do I buy one of these kits? Someone should start a discussion forum where folks can talk about their builds..

[@user-dd7fw8ox3c]

This seems not much different to the Geet generator system invented ages ago, using exhaust gasses, it would run an engine on crude oil, please someone explain why its not the same???

[@aarondavidson6409]

its a grift. they will sell them before they explain anything, then run in to the shadows

[@chrisprysok7634]

Now you're talking. I have a generator and a tg and the bubbler. I need a plug and play pipe set and the uv chamber and whatever parts to fit on my geny.

[@calebcoetzee5131]

Keep up the good work !

[@dxtrum]

The discord server has been incredibly helpful for my understanding of TSG. Especially the part where Malcom mostly stole the idea except for the concentric spheres. TSG is not LENR tho that's just part of Malcom's lies. Not to say it's not useful, it's certainly worth exploring, but it's not LENR or fusion.

[@lllilililililililililll]

can this be used to clean air on a submarine space station or underground structure?

[@ShiftedPerspectivesCo]

Hey, where’s the link to the kit? I’m ready to buy it now please 😁

[@toofast4use]

Can I fit the thunderstorm generator to a modern boiler? I'm a heating engineer and would love to help x

[@analogdriver]

Yes Jordan! Update pls Those test kits send out to groups all over the world last year: findings?? Sure some are or were critical? Give us the full story, hearing MB himself advocating is kind of as expected. I regard your report more.

[@PrivatelyHanging]

We need some evidence with the generator running heavy loads so we know what the application is. If this thing is exponentially fuel efficient they can be ran around the clock as an off grid power supply. A sound proof bunker with a generator running inside would be absolutely ideal in my situation.

[@aarondavidson6409]

evidence? why do you need evidence. we said heaps of techo jargon.. are you not satisfied?

[@PrivatelyHanging]

@aarondavidson6409 PC is the new QT for the SV. I don't know either 😏

[@ThebigbrAIn-ps7qd]

Has anyone ever thought of combining the thunderstorm generator with a precise geographic location to optimise its performance? Lets say, maybe within the King's chamber of the Great Pyramid?

[@Genie6464]

Just a quick question. Have you seen that some of these eerie looking lights in the sky that are becomming more orevalent are being called plasmoids? Any thoughts on this? Im kinda leaning towards this might be a "happy accident" from the powers that be to make this topic more obfuscated and difficult to search for? Its a thought anyway...

[@seanallen924]

Thanks for the update, will it work on forced induction motors?

[@ash0787]

Do you think I could mount one of your kits onto a 2 stroke motorized bicycle or is the scale too large ? it doesn't look that big in the picture. I dabble with electronics and engineering stuff usually with success but I would struggle to fabricate the metal pipe section with the spheres.

[@TheMaxthesis]

try putting the script a bit below the camera, it might look better when you read it on camera

[@aboveallthingslove6349]

Things are starting to pick up in evo world, open source is the solution.

[@Fingle]

Thanks for the update! I've been wanting to get involved with this plasmoid stuff for years now. If you want help with audio normalizing, or other yourube best practices let me know!!!

[@Fingle]

I also made a 3d animation of the TSG that I've been trying to get to you for MONTHS. Your hard to reach I guess haha. How can I sen thet over for use in your videos?

[@Aedonius]

FYI you speaking at beginning is only left channel

[@falls2shine712]

oh! my left speaker is not working. Thanks! I thought there was no sound at all.

[@tylerfoss3346]

Please give us kit information when you can. Thank you!

[@MrKacperk]

I appreciate all the workshops, documents, notes etc. But where can I buy one of these free energy kits? Otherwise this whole thing is doomed to fail.

[@jlcboobs]

I don’t believe it’s a free energy device.

[@eteceo6493]

anyone else having only the left-side hearing output only? only on this video it's doing that :/

[@ericmc6482]

Hi Jordan, nice work and sincere thanks, ditto to Malcolm and all involved. Jordan, is it possible to get stl file copies of your two time crystal geometries please ?. TIA from Perth, WA.

[@robg6202]

Most excellent

[@hydrorix1]

Now, if we just figure out how to harvest the plasmoids more directly...! 🚀

[@ElijahCokeley]

I hope to invest when I can. I look forward to buying the kit too. What is Hyundai up to these days?... 😅 God bless 🎉

[@TRINVIDEO]

Does anyone know if attached to a car would it be able to replace a catalytic convertor and the vehicle would still run properly?

[@surftown_]

Replace or work with, it doesn't really matter. I assume the cat can stay, that may bypass the O2 sensors, if not, the pcm would need to be reprogrammed, so that the 02 sensors weren't throwing codes (engine light DTC). This is something I've thought about myself, I would assume the 'normal' range of 02 detected in the sensors would need to be changed.

[@demounit2505]

Cool. I found the link.

[@gillyrcgilmore3742]

Does the kit work on diesel engines?

[@kyledammann4284]

Where can we find the white paper?

[@markouk]

Jordan the sound at the start of the video is very very quiet, almost impossible to hear you.

[@LUKETHELOG]

Sounds like zero point energy, have you thought of running copper wires into positive exhaust gas side and negative wire into intake side and get a multi metre to see how much voltage you get out of these plasmoids.

[@quanglucvo1378]

Let's make it happen.

[@dwightvoeks9970]

Is it possible this phenomenon occurs in nature and if so in what form?

[@demounit2505]

a ... thunderstorm.

[@supervidere7]

sounds messed up... like Voice is only via one speaker, not two

[@olo_smooth_olo5606]

I can't believe I bought into this at one point

[@jacobvillarreal9887]

Happy Perihelion day

[@johnharcombe9412]

EV are now 19% global sales and growing

[@BeauDadda]

Question, is the shaman from Ronald perry, is it fiction. Rather than notes and discuss. I did buy the paper back 1-20 notes though :).

[@AUS_RACING]

Lets put one on my rotary ❤

[@travarb]

TheTSG and spinoff tech that can change the world. He is stepping on the toes of billionaire men who don't play fare. They will protect their monopoly at all costs. With the addition of the TSG, Cold Fusion (1989), Star-in-a-Jar, ULTRA experiment (Bob Greenyer), Cavitation Pump, and many more, all have plasma torroid production common to all devices. Each produce an Exotic Vacuum Object [EVO] or mini Black Hole. The EVO can produce transmutations and disrupt the very fundamental nuclear forces that hold atoms/nucleus together as well as the sources of gravity. When understood better and controlled, this newly rediscovered physics will change the world as we know it. It's UFO tech. Can mankind handle such unlimited free energy. I hope so. It will be fun to watch this technology emerge.

[@robg6202]

The time crystal has edges that remind me of the great pyramid sides... hmmm

[@rockySCR]

Seem to be able to do plenty except send out share certificates to share holder investors

[@lsj1]

6:10 This technology is the cat’s ass!

[@elusive323]

Time crystal looks like 8 sided Cheops pyramid kind of.

[@supernaturally357]

With all this happening, a MVP being commercially available, the books etc etc surely it would be an ideal time to return to Rogan?

[@Terry-HandPanHowe]

💓💓💓💓

[@travissidelinger]

What's the EROI?

[@DocJAMES-o5t]

HOLD THE LINE

[@emrysmcwryn7902]

If it transmutes exhaust into "air" then it can run on it's own exhaust. Exhaust pipe feeding intake. This has not been done. Think about this statement or feel about it, the choice is yours.

[@hydeparkist]

Not a chance he and everyone around him did NOT think about this. The point is that it has no purpose and will create a buildup of gasses in the loop. There's still fuel being burned, so the amount of gas will increase. The oxygen level of the intake and exhaust gasses is exactly the same, so there's another reason to not recirculate.

[@CaffeinatedSentryGnome]

Maybe instead run a second engine that doesn't have a thunderstorm generator of the exhaust of an engine that has one installed. then measure the difference between the intake air and the exhaust air. Also it would be nice to see the engines under load. Have some 500w lights or something connected to the generators

[@Language-f6y]

I forgot if you have mentioned this in the past, but is there any way to invest in this technology, are there any public stocks, etc?

[@flojotube]

it's open source.. if youve watched even one video (like this one) you'd know that

[@Language-f6y]

@flojotube I do know that, however that doesn't mean that they aren't also selling product. Strike Foundation is a company. Take 3D printed parts for example. While they are free, someone may still purchase it for convenience, or open source software, it might be utilized as a base for an altogether different product. Another example with plasmoids, there are open source drafts for a turbine engine. While someone can technically build it themselves, most people do not have the means to do so, therefore it can be sold. Or the ruined deal that they allegedly had with Honda, could always be something similar.

[@aarondavidson6409]

@@flojotube lol have you read the open source documents or are you just regurgitating words

[@flojotube]

@ I have a working unit on a gas generator that was made by a local welder using the OPEN SOURCE information they published for anyone to use. Cost me $250 in materials for both me and the welder so he could have one too. Thats as open source as it gets. The fact that youre even asking these questions means you just stumbled upon this and want to toss money at something that sounds amazing that you dont understand AT ALL. You cant create a massive publicly traded company off something like this. Thats how all previous attempts have been suppressed. Its open source or nothing. Regurgitate that to yourself so maybe youll get whats happening here.

[@jlcboobs]

Strike Energy inc

[@BangBangBo]

Watch this guy be part of the CIA black budget programs part of the disclosure plan.

[@PrivatelyHanging]

That would be rich, and make sense he hasn't been clipped like all the other guys like Stanley Meyers.

[@robg6202]

God speed

[@jhighturntup5558]

☀️ 🌒 \⚕/ V ✝️

[@REKT_Industries]

Is anyone else building a TSG in Melbourne ? DM me

[@IronicallyVague]

kit sets ? omg omg

[@tonywoods1805]

I've been following this from when it came out on Joe Rogan. I don't understand why this is not all over the media by now?

[@rickknight3823]

A variety of reasons... Essentially it upsets the status quo.. others may simply not have the mental or emotional capacity to embrace this

[@tonywoods1805]

Nonsense! Peoples 'emotional capacity' has nothing to do with it. If it works , it works, and it would be an absolute game changer. Any journalist would be happy to report on this. I'm becoming more skeptical daily.

[@squadabingo9113]

Set one that was about it buddy what world are you living in where you think journalists and the media are looking out for the common good of the people? ​@@tonywoods1805

[@SubconsciousLight]

Money runs this world, or greed to ne more specific. Pedrodollar has highest movings like pharmacy drugs and whatever you can put oil into. Wars moves also momey. Free energy device cuts all those moneyflows. Also can you imagine war using free energy devices developed further with infinity budget? No refilling, no reloading? Yea, fun stuff truly... Also it gives freedom to inviduals, intependency. Greed system relys on us being intepend on system. Also mental capacity. If we are not evolved spiritually, mentally on same level as materialistic high level technology, that sht will blow up on our face very veery fast (war for example)! There is reason why free energy devices has been hold back, we still blinded by relying on authors and materialism without connection to truth, soul, love. That seriously dangerous combo to play with.

[@ClubhouseGardens]

Too many people will view this as a too good to be true story and scoff it off till it hits main market. It's pretty typical for new inventions .

[@Christopher-cf6wm]

Good Stuff. Sent to Russia :)))

[@DocJAMES-o5t]

I've been trying to help intell for a long while, SIR You're A LEGENDARY BADASS, MUCH ABLIGE, HOLE THE LINE

[@flojotube]

spellcheck much

[@DocJAMES-o5t]

@flojotube aren't you the eloquent one

[@flojotube]

Ummm. Ok?

[@DocJAMES-o5t]

@flojotube troglodytes , aus omkiwa onomini aus

[@FirstSword-o6f]

0:20 when you have to read a script to thank your audience haha wtf 😅..

[@shockalotti]

700 usd is too much IMHO

[@ImhotepBE]

wait for the mass production.. 700usd is not cheap, but if works...in the long run is not too bad- I think 😅

[@BeauDadda]

Yeah your paying for shipping and fabrication at the moment so 700 right now not bad.

[@ash0787]

It does seem a lot for an off the shelf lizard warmer, an aquarium bubbler and a piece of steel but maybe what they have made is better than if you combined those items yourself.

[@pepsiontherockspls]

I looked into doing this myself a while ago. My assumption is the bulk of the cost probably has to do with creating and annealing the spheres. It is laborious to weld as the geometry needs to be at least near-exact, and it requires heavy machinery to get the annealing part right. If you don't do that right, it becomes a lot less effective unfortunately. When you include all that, it's likely slim margins for a preassembled kit like this. Otherwise it's like $200 for raw materials.

[@ImhotepBE]

@@pepsiontherockspls they spent hundreds of hours on this project, so if you don't know exactly what you doing then you might be wasting your time and money. So you are correct..it's not as simple as welding a few bits of metal together, plus they need to make some profit as well... hopefully there will be more people trying this "thing" , I would like to see it installed on the car. I think if we give enough time we will see more and more about it , people will experiment with it...we should see more and more of it this year. Have a good day 👍🏻

[@nicecriminal6150]

Fluffers