MAP Sensor Cleaning - Peugeot 206

[@screwsnutsandbolts]

Thanks for watching my video. If you found this or any of my other videos helpful, maybe you could consider supporting my channel by using the ‘Thanks’ button below each of my videos. Your support would be really appreciated, thank you ! 👍 Screwsnutsandbolts

[@patriotnederland6417]

The question how, KZbin perfectly shownieuws. But the question when and why I still don't know. Can you explain when and why I have to do this? Thanks from me from the Netherlands. 👍

[@dduukkiiccaaa]

this kind of cleaning only shortens the life of the presure sensor.......good job

[@screwsnutsandbolts]

Thanks !

[@batyanko8283]

Quite useful. Now I know what to look for with my hands, digging under the manifold on a 1.8 16v 406...

[@screwsnutsandbolts]

Thanks for watching !

[@picauu]

Thanks for the video. Can you help me? I have the Citroen Xantia HDI 2.0, but I can't find where the MAP sensor is installed. Do you have any tips please? Thanks

[@screwsnutsandbolts]

You're welcome. I haven't worked on one so I don't know, sorry.

[@davide0radice]

Very detailed video and very useful for me. Thank you! Since you disconnected the battery, I believe you could have cleaned the sensor connectors as well.

[@screwsnutsandbolts]

Thanks for watching :)

[@jesusdavidroldan8256]

Great video, thanks for share. I have a question: I need to replace the wiring plug (electrical harness) since the current is broke. The colors on the replacement wire plug (gray, yellow, black & orange) that I found do not have the same colors that the current (red, blue/green, blue/white & red/white) all this watching the wire plug connected into the MAP Sensor front view. Is there an specific way to find out the correct order to connect the wires or should I follow the order as they are positioned? I hope to explain my self correctly. Thanks.

[@screwsnutsandbolts]

I would assume you should install them is the same order as they are positioned in the original wiring plug.

[@jesusdavidroldan8256]

I was thinking the same but I want to ask you first. In case that this not work any idea of how I can match the wires?@@screwsnutsandbolts

[@tudy4x4]

😲😲😮😮1:20 the screw rotates by itself..😲😲😛😛

[@screwsnutsandbolts]

lol :)

[@maheraldokh6962]

Thank you man ,any solutions for improving the transmission oil cooling system for al4 gearbox ,gearbox start shifting very bad when engine tempreture get high, and i found in some websites that we can use an adapter for connecting an external coolant to prevent gearbox oil burn

[@screwsnutsandbolts]

You're welcome. I don't have any experience with transmissions, sorry.

[@maheraldokh6962]

@@screwsnutsandbolts thank you so much 🌹

[@AmmarZed9167]

Thank you

[@screwsnutsandbolts]

You're welcome

[@zekshajduk8854]

Great !!! Thanks man !!!👌

[@screwsnutsandbolts]

You're welcome !

[@Maxay86]

Вот спасибо. Привет из России

[@screwsnutsandbolts]

You're welcome, thanks for watching !

[@markwilliams2830]

Thanks for another informative Video.May I wish you a Happy Christmas .Ive enjoyed all you've done this last year and look forward to the next for more useful hints and tips .M

[@screwsnutsandbolts]

Thank you very much, I appreciate that. Happy Christmas to you and yours too 🎅

[@micdass4671]

Hi. What are the trouble caused by a pickup problem in peugeot 207 1.6 Auto 2013. From gear 1 to 2 or 2 to 3 filling like no power in 2 second.

[@screwsnutsandbolts]

I haven't worked on an automatic transmission so I don't know, sorry

[@DZ-vd4zj]

شكرا🇩🇿

[@screwsnutsandbolts]

Thanks for watching !

[@abdelhaybenammar2907]

Pourquoi vous avez enlevé les tuyaux d'air

[@screwsnutsandbolts]

To make more space when removing the sensor

[@wassefhajj]

What kind of cleaner did you use??

[@pedrobastos7383]

why do u need to disconnect the battery , if u disconnect the MAP connector?

[@screwsnutsandbolts]

It's generally recommended that you disconnect the battery when working on any of the vehicle's electrical components.

[@zsoltsiro1310]

in case the battery is faulty, its just a precaution

[@jovanmajstorovic41]

I tried to undo bolt but it was rotten and snapped. Now I cant tighten sensor. Any solutions how to remove broken bolt, do I need to remove intake manifold?

[@screwsnutsandbolts]

You shouldn't have to remove the manifold. There should be plenty of videos on youtube showing how to remove a broken screw/bolt like this one: kzbin.info/www/bejne/iX7VdYyAq75jitU

[@jovanmajstorovic41]

@@screwsnutsandbolts Thanks for answer. Bolt is rotten by whole length and i tried to drill it and undo by flat screwdriver but it cant.

[@Videouploader248]

Wtf! You dont have to disconnect battery when replacing a sensor. Just be sure the car is off thats all. Its good to disconnect te battery if you had some fault codes, and if you want to reset all values so it can re-learn the new values from the new sensor.

[@Screwball70]

The old Haynes manual's used to tell you to disconnect the battery even if you were replacing some trim lol

[@alexandruduta8102]

[@antonysantos4365]

Hello, What kind of cleaner is that? Thanks

[@screwsnutsandbolts]

It's air flow sensor cleaner, similar to this one: www.amazon.co.uk/Liqui-Moly-Sensor-Cleaner-200ml/dp/B00295EEBK

[@user-dapeng661]

How often should the MAP be cleaned ?

[@screwsnutsandbolts]

There's no set time but I've heard people recommend every 30,000 miles

[@slimovictv3567]

لماذا تم تنظيف هذا المستشعر و ماهو الخلل الداعي لذلك

[@adriancabrillana6057]

Que sensor es el que está limpiando?

[@timbresbermont651]

sensor map

[@ronnalperez9620]

Saludos estimado tendra usted la medida del oring de este sensor?

[@screwsnutsandbolts]

I don't know the size, sorry

[@hectorherbert6585]

what are the 'troubles' caused by a dirty air-flow sensor..??..thx...because I have micro engines cuts especially when accelerating harder (freeway)..i thought it could be a spark plugs big coil block who needs to be replaced along with new spark plugs..??

[@screwsnutsandbolts]

There are a few issues that can be caused by a bad map sensor which could also be similar to other issues with the engine. A failing ignition coil pack or spark plugs could be causing the poor acceleration or even something as simple as a clogged fuel filter. Check this link: mechanicbase.com/engine/map-sensor-symptoms/

[@hectorherbert6585]

@@screwsnutsandbolts thx for the tip..

[@screwsnutsandbolts]

You're welcome !

[@Kariyalex]

thanks

[@screwsnutsandbolts]

You're welcome !

[@ivanholubec]

The breather hose and intake manifold are full of oil. Clean it too.

[@Włodzimierz-i9p]

This first sensor for MAP is combined with the IAT sensor

[@nickdevaney2588]

I need your help sir. I have two connectors that have been cut off and I'm not sure which one to reconnect. Can I email you with the photo's, please? Thanks

[@c_ibrahim_yildirim_c6737]

👍

[@screwsnutsandbolts]

Thanks !

[@mouradallal1924]

A quoi sert ce capteur ?

[@screwsnutsandbolts]

The MAP sensor provides instant intake manifold pressure information to the engine's electronic control unit. The data is used to calculate air density and determine the engine's air mass flow rate, which in turn determines the required fuel delivery for perfect combustion

[@calmastadio]

top

[@screwsnutsandbolts]

Thanks

[@alexanders1075]

Should clean the pipes you took off Too Because it's full of oil

[@samisamsetif]

دير شرح توضيحي أكثر او شرح تطبيقي

[@abdulwihed]

Car alarm does not work Peugeot 206

[@Русланка...ев]

Аккум зачем отсоединять

[@screwsnutsandbolts]

It's always recommended that you disconnect the battery when working on electrical components

[@luisfernandoparodidelgad-cy9gv]

Colocar subtitulo in spanish